Proceedings – 6th NA Monterrey, Mexico

---

ISSN: 2169-8767 (U.S. Library of Congress)              ISBN: 978-1-7923-6130-2

---

Full papers will be indexed in EBSCO.

---

ID 7         Factors Influencing Transport Productivity of a Freight Transport Company
Felix Eduardo Bueno Pascual

José Luis Martínez Flores

Santiago Omar Caballero Morales, School of Logistics and Supply Chain Management,Universidad Popular Autónoma de Puebla, Avenida 9 Poniente 1712, C.P. 72410, Puebla, Puebla, México

Luis Alberto Barroso Moreno, Universidad de las Américas Puebla. Ex Hacienda Sta. Catarina Mártir S/N. San Andrés Cholula, Puebla. C.P. 72810. México

ID 10  The Challenges Affecting the Reliability and Maintainability of Rolling Stock Operating in the Thabazimbi Channel
Avumile Bera, Bheki Makhanya and Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa

ID 11  Reliability analysis of wastewater treatment plants: Lesotho case study
Mohasi Ntelekoa, Bheki Makhanya, Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa

ID  12  The Importance of Post-mortems in Construction Projects
Gavin Motswadi and Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa

ID  13   Quality and Reliability Analysis of Long-hole Stope Slots: A Case Study at South Deep Gold Mine Based on Drilling and Blasting Practices
M. Tshabalala and JHC. Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, South Africa

ID 14  Critical Success Factors as Enablers to Achieve Quality Management System Benefits: An Engineering Organisational Case Study
Siyabonga Zwane, Annlizé Marnewick and Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa

ID 15  Application of the Delphi Technique to Improve the Implementation of Cost of Quality in Industry
B.B.S Makhanya, H. Nel, J.H.C. Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa

ID 17       Application of Fuzzy Logic for Evaluation of the Level of Social Acceptance of Traffic Noise Pollution Reduction Strategies in Western New York
Daxing Zhao, Zichuan Liu, Anthony Runk, Johnson Adebayo Fadeyi, Department of Industrial & Systems Engineering, University at Buffalo, Buffalo, NY, USA

ID 18       The Optimization of an Electric Vehicle (EV)  for Improved Range
Douglas W.E. Ferrier, College of Technology, Indiana State University, Terre Haute, IN 47809, USA

Patrick Appiah-Kubi, Program Director, Cloud Computing & Computer Networking, Cybersecurity Department, School of Cybersecurity & Information Technology, University of Maryland Global Campus

ID 19       IIoT and Assisted Reality: Re-Shaping Traditional Robotic Cells
E. N. Finley, S. M. DeWildt, N. A. MacArthur, Z. A. Rougeau, and E. I. Sarda, School of Engineering and Technology, Lake Superior State University, Sault Sainte Marie, MI 49783, USA

ID 20       The Use of Electric Cars in Short-Notice Evacuations: A Case Study of California’s Natural Disasters
Roxanne Peterson and Mohamed A. Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, San Luis Obispo, CA 93407, USA

ID 21       Reciprocating sliding motion tribometer design
Demófilo Maldonado Cortés, Dra. Laura Peña Parás, Mechanical and Electronics Department, University of Monterrey, Monterrey, México

Lizbeth Pérez Alvizo, Yadira Lissete Rangel Acosta, Jesús Ricardo Puente Martínez, Mechanical Engineering Students, Universidad de Monterrey, Monterrey, México

ID 22       The Accuracy of Dynamic Simulation with the Use of TSB within JACK Siemens PLM software
Xiaoxu Ji, Justo Hernandez, Emily Schweitzer and Alexa Littman, Department of Biomedical, Industrial and Systems Engineering, Gannon University, Erie, PA 16541, USA

ID 25       Simulation of Texture Geometries to Optimize Tribological Properties
Adrián Rodríguez, Luisa Martínez, Luis Miranda, School of Engineering and Technologies, Universidad de Monterrey, San Pedro Garza García, N.L. 66238, México

Laura Peña-Parás, Santiago Cruz and Demófilo Maldonado, Department of Mechanical and Electronic Engineering, Universidad de Monterrey, San Pedro Garza García, N.L. 66238, México

Martha Rodríguez-Villalobos, Department of Physics and Mathematics, Universidad de Monterrey, San Pedro Garza García, N.L. 66238, México

ID 26       Diffusion of Facilities Management in an Emerging Market: Case of Sri Lanka
Himal Suranga Jayasena, Department of Building Economics, University of Moratuwa, Moratuwa, Sri Lanka

Gowsiga Mahendrarajah, Department of Building Economics, University of Moratuwa, Moratuwa, Sri Lanka

ID 27       Mobile Application Design for Managing Preventive Maintenance Information for Neonatal Respirators 
Jhonatan Junnior Anaya Medina, Diego Daniel Martínez Calderón, and José Antonio Taquía Gutiérrez, School of Engineering and Architecture, University of Lima, Peru

ID 29       Estimate the Potential in the Harvest of the Sacha Inchi Seed in A 12-Hectare Crop, Using the Decision-Making Model Under Uncertainty
Luis Fernando Pedraza Ruiz, Department of Engineering, Fundación Universitaria de Popayán, Popayán, Colombia

Ingrid Milena Fernandez, Department of Engineering, Fundación Universitaria de Popayán, Popayán, Colombia

ID 30      Statistical Analysis Methods changed from Traditional to a Continuous Annealing Heat Treatment in a Copper Wire Drawn Machine
Francisco Antonio Perales Carballedo, UPAEP University, México

José Luis Martínez-Flores, UPAEP University, México

ID 31       Risk Factors and Prediction of ST-segment Elevation Myocardial Infarction
Joshua Emakhu, Leslie Monplaisir, Celestine Aguwa, and Sara Masoud, Department of Industrial and Systems Engineering, Wayne State University, Detroit, MI 48201, USA

Suzan Arslanturk, Department of Computer Science, Wayne State University, Detroit, MI 48201, USA

Egbe-Etu Etu, Department of Marketing and Business Analytics, San Jose State University, San Jose, CA 95192, USA

Joseph Miller, Department of Emergency Medicine and Internal Medicine, Henry Ford Hospital, Detroit, MI 48202, USA

 

ID 33       Designing System Assessment of Supply Chain Management Performance in Bridge Project using SCOR
Naniek Utami Handayani, Industrial Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

Anita Mustikasari, Management Department, Yogyakarta State University, Colombo No. 1 Yogyakarta, 55281, Indonesia

Mochammad Agung Wibowo, Civil Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

Chemink Sugondo Simanungkalit, Industrial Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

ID 34       AHP Method for Supply Chain Management Performance Measurement in Construction (Study Case: Bridge Project)
Anita Mustikasari, Management Department, Yogyakarta State University, Colombo No. 1 Yogyakarta, 55281, Indonesia

Naniek Utami Handayani, Industrial Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

Mochammad Agung Wibowo Civil Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

Chemink Sugondo Simanungkalit, Industrial Engineering Department, Diponegoro University, Prof. Soedarto, S.H., Semarang, 50275, Indonesia

 

ID  36 Local Content Requirements in the South African Renewable Energy Independent Power Producer Procurement Programme- With a Focus on Wind
Andile Mgudlwa, Jan Harm C. Pretorius, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa

ID  37  A Study of the Watershed Management (Maintained and Restored) in Krueng Peusangan, Aceh Province, Indonesia
Halim Akbar, Riyandi Praza and Muhammad Authar ND, Faculty of Agriculture, Universitas Malikussaleh, East Reuleut, Muara Batu, 24355 North Aceh Regency, Aceh, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  38  Analyzing the Effect of Products and Human Resources Towards Customer Loyalty at Bank Aceh Syariah, Bireuen, Indonesia
Damanhur, Falahuddin, Rani Puspitanigrum, Intan Magfirah, Faculty of Economics and Business, Universitas Malikussaleh, Lhokseumawe, Aceh Utara 24351, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 39   Optimising and Digitalising the Technology-Based Electronic Justice in the 4.0 Era: A Judicial Reform
Elidar Sari and Arif Rahman, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  40  A Study of Community Empowerment Strategy for Vulnerable Groups in Eradicating Poverty at Aceh Province, Indonesia
Risna Dewi and Teuku Alfiady, Faculty of Social and Political Science, Universitas Malikussaleh, Muara Satu, Aceh Utara, Aceh 24355, Indonesia

Jumadil Saputra and Zikri Muhammad, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 41   An Investigation of Biodiversity and Genetic Resources: The Importance of Legal Protection in Indonesia
Yulia, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  42  Determining and Evaluating the Pyrolysis of Candlenut Shell as an Alternative Energy Sources
Sulhatun, Muhammad, Suryati, Meriatna and Lukman Hakim, Department of Chemical Engineering, Faculty of Engineering, Universitas Malikussaleh, Muara Batu, Aceh Utara, Aceh, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  43   Chitosan-Alginat-Aloe Vera Biomembran for Wound Dressing Applications
Suryati, Meriatna, Sulhatun and Puspita Sari, Department of Chemical Engineering, Faculty of Engineering, Universitas Malikussaleh, Muara Batu, Aceh Utara, Aceh, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 44   Identifying the Effectiveness of Business Incubator Training among UPN Veteran Jakarta Undergraduate Students:  An Application of Randomized Controlled Trial Approach
Widayani Wahyuningtyas, Department of Nutrition, Faculty of Health Sciences, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia

Zackharia Rialmi, Department of Management, Faculty of Business and Economics, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia

Condrowati, Department of Physiotherapy, Faculty of Health Sciences, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 45       Analysis of the Adoption of EVs and Charging Infrastructure in Mexico
Adrian Ramirez-Nafarrate, Mitchell Ruiz Martinez, and Juan C. Grayeb Pereira, Facultad de Ciencias Económicas y Empresariales, Universidad Panamericana, Zapopan, Jalisco 45010, Mexico

ID 46       Description of the Electrification and Drinking Water Processes in Non-Interconnected Zones (ZNI) and Construction of Explanatory Structures of these Processes in a Particular Community

Iván David Sánchez, Maria Fernanda Flórez, Luisa Fernanda Jimenez, Laura Milena Cárdenas, Industrial Engineering Department, University of Antioquia, Medellín, Colombia

 

ID 49       Familiness from the approach of Participation, Essence and Identity in Family Businesses of two municipalities in the Northern Zone of the State of Mexico: An Empirical Approach
Sayde Suárez Odilón, Universidad Autónoma del Estado de México, Centro Universitario Atlacomulco

Zugaide Escamilla Salazar, Universidad Autónoma del Estado de México, Centro Universitario Atlacomulco

Carlos Robles Acosta, Universidad Autónoma del Estado de México, Centro Universitario Ecatepec

ID 55       Building Models Based on Artificial Neural Networks to Predict Customer’s Purchase Frequency 
Galo Paiva, Departamento de Ingeniería Industrial y Sistemas, Universidad de La Frontera, Temuco, Chile
Carlos Hernández, Departamento de Procesos Industriales, Universidad Católica de Temuco, Temuco, Chile

ID 56       Applying Machine Learning Algorithms to Predict the Interest in Entrepreneurship among Engineering Students
Magaly Sandoval, Departamento de Ingeniería Industrial y Sistemas, Universidad de La Frontera, Temuco, Chile
Carlos Hernández, Departamento de Procesos Industriales, Universidad Católica de Temuco, Temuco, Chile

ID 57       Effects of Technological Factors and Mental Workload in Online Higher Education Professors on Their Academic Performance
Arturo Realyvasquez Vargas, Department of Industrial Engineering, Tecnológico Nacional de México/I.T. Tijuana, Tijuana, Baja California, Mexico

Karina Cecilia Arredondo Soto, Chemical Sciences and Engineering Faculty, Universidad Autónoma de Baja California, Calzada Universidad 14418, Parque Industrial Internacional, Tijuana, Baja California 22390, Mexico

Jorge Luis García-Alcaraz, Department of Industrial Engineering and Manufacturing, Autonomous University of Ciudad Juarez, Ciudad Juárez, Chihuahua 32310, Mexico
Department of Industrial Engineering, Tecnológico Nacional de México/I.T. Ciudad Juárez, Ciudad Juárez, Chihuahua 32500, Mexico

José Roberto Díaz Reza, Division of Research and Postgraduate Studies, Tecnológico Nacional de México/I.T. Ciudad Juárez, Ciudad Juárez, Chihuahua 32500, Mexico

Jesús Everardo Olgín Tiznado, Faculty of Engineering, Architecture, and Design, Autonomous University of Baja California, Ensenada, Baja California, Mexico

ID 58       Responsible consumption as a driver for remanufactured products
Karina Cecilia Arredondo-Soto, Facultad de Ciencias Químicas e Ingeniería, Universidad Autónoma de Baja California, Calzada Universidad #14418, Parque Industrial Internacional, Tijuana 22390, Baja California, México.

Arturo Realyvasquez-Vargas, Department of Industrial Engineering, Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Calzada del Tecnológico S/N, Tijuana 22414, Baja California, Mexico.

Jorge Luis Garcia-Alcaraz, Department of Industrial and Manufacturing Engineering, Autonomous University of Ciudad Juarez, Ave. del Charro 450 Norte. Col. Partido Romero, Ciudad Juárez 32310, Chihuahua, México.

Jesús Everardo Olguín-Tiznado, 4Departme Faculty of Engineering, Architecture, and Design. Autonomous University of Baja California.Carr. Transpeninsular 3917, U.A.B.C., 22860 Ensenada, Baja California, México.

José Roberto Díaz-Reza, Department of Electric Engineering and Computer Sciences, Autonomous University of Ciudad Juarez, Ave. del Charro 450 Norte. Col. Partido Romero, Ciudad Juárez 32310, Chihuahua, México

 

ID 66       Fostering Creativity and Innovations based on Classification Schemes: Case Studies in Engineering Design Education
Karl Hain and Christoph Rappl, Faculty of Mechanical Engineering and Mechatronics, DIT Deggendorf Institute of Technology, 94469 Deggendorf, Bavaria, Germany

ID 70       Smart Irrigation Scheduling Algorithms and Deployment Scenarios: Challenges and Recommendations for Farming in the Sub-Saharan Africa
Supreme Ayewoh Okoh, Suleiman Zubairu, Bala Alhaji Salihu and Elizabeth N. Onwuka, Department of Telecommunication Engineering, Federal University of Technology, Minna, Nigeria

ID 72       Analysis of Autism Spectrum Disorder and Metrics of Eye Movement
Ethan S. Yun, Stanford Online High School, Redwood City, CA 94063, USA

ID 73       Relationship between Playing Video Games and Happiness
Allie Lin, Stanford Online High School, Redwood City, CA 94063, USA 

ID  74  Investigating the Authority of the Prosecutor as An Alternative for Criminal Case Handling in the Indonesian Justice System
Jamaluddin, Marlia Sastro, Ramziati, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  75  Investigating the Commercial Innovative Marketing in the Digital Era 4.0: A Comparative Study
Khalsiah and Yuliusdharma, Faculty of Business and Economics, Universitas Malikussaleh, Blang Pulo, Muara Satu, Aceh Utara, 24355 Aceh, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Saifuddin Yunus, Faculty of Social and Political Sciences, Universitas Malikussaleh, Blang Pulo, Muara Satu, Aceh Utara, 24355 Aceh, Indonesia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID  76  How can Corporate Performance Kept in Multinational Firm: a Study from Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Wilson Rajagukguk, Department of Management Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta, Indonesia

ID   77   Maintaining Brand Equity of Business Strategy in Multinational Firm: Fact from Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Gidion P. Adirinekso, Department of Management Faculty Economics and Business, Universitas Kristen Krida Wacana, Jakarta, 11470 Indonesia

ID   78   Effect of Investment Opportunity Set, Firm Size, Institutional Ownership and Dividend Policy on the Firm Value in Automotive   and Components Companies Listed on the Indonesia Stock Exchange for the Period 2015-2019
Agung Fajar Ilmiyono, Hari Gursida, Ellyn Octavianty and Ani Mulyani, Department of Accounting, Faculty of Economics and Business, Universitas Pakuan, Bogor, Indonesia

ID  79   Cooperative And MSME Empowerment Strategies in Economic Recovery During the Covid-19 Pandemic in Bogor District
Dinalara D Butarbutar and Mustika Mega Wijaya, Department of Law, Faculty of Law Pakuan University, Bogor, Indonesia

ID  80   Optimization Regional Original Income (PAD) of Economic Growth Bogor City 2015-2020 (During Covid-19)
Retno Martanti Endah Lestari, Ernadhi Sudarmanto, Antania Hanjanilia Ristiyana, Accounting Departement, Economics and Bussiness Faculty, Pakuan University, Bogor, West Java, Indonesia

ID  81   Soft Skills Improvement Of Youth Organization: Entering The Work Environment
Salmah, Fredi Andria, and Amelia Rahmi, Faculty of Economics and Business Pakuan University, Bogor, Indonesia

ID  82   Implementation of Criminal Sanctions in Law Number 6 of 2018 Concerning Health Quarantine for Large-Scale Social Restriction Breakers in the Jabodetabek Area
Sapto Handoyo DP and Nazaruddin Lathif, Departement of Law, Faculty of Law Pakuan University, Bogor Indonesia

ID 85       Net Promoter Score Scale Transformed into a Logit Model, a Full-service Restaurant Approach
Christian Reich López, María Mayela Terán Cázares, Jesús Fabián López Pérez, Mónica Blanco Jimenez, Universidad Autónoma de Nuevo León, Facultad de Contaduría Pública y Administración Av. Universidad S/N, Col. Ciudad Universitaria, San Nicolas de los Garza, Nuevo León, México.

 

ID 87       Simulation Improves Service and Operations at a Franchise Resale Store
Caitlin Pethers, Marie Ruesga, Parker Moesta, and Edward J Williams, Business Analytics, College of Business, University of Michigan – Dearborn,Dearborn, MI, 48126, USA

ID 89       Application of factorial analysis and multiple regression for the prediction of the stabilization time in furnaces in the heat treatment area in a metalworking company
M.Sc. Refugio Chávez Hernández, Doctorate in Supply Chain Management and Logistics, Popular Autonomous University of Puebla State, México.

Ph.D. José Luis Martínez Flores, Faculty of Industrial, Logistics and Manufacturing, Popular Autonomous University of Puebla State, México

Eng. Carlos Mario Leal Garza, Industrial and System Engineer, University of Monterrey, México.

ID 90       Enhancement of Corrosion Resistance of Hot-Dip Galvanized Carbon Steel by Low Amount of Ni Addition
Rafael Gonzalez-Parra, Arturo Barba-Pingarrón, Raúl Valdez- Navarro, Alba Covelo-Villar, Miguel A. Hernández-Gallegos, Centro de Ingeniería de Superficies y Acabados (CENISA). Departamento de Ingeniería de, Diseño y Manufactura. División de Ingeniería Mecánica e Industrial. Facultad de Ingeniería., UNAM. 2o Nivel. Edificio “T” (Bernardo Quintana), Circuito Exterior, Ciudad Universitaria, Coyoacan, 04510, Ciudad de México

Javier Cervantes-Cabello, Centro de Ingeniería Avanzada, Departamento de Ingeniería de Diseño y Manufactura, División de Ingeniería Mecánica e Industrial, Edificio X. 2o Piso, Circuito Exterior, Ciudad Universitaria. Coyoacan, 04510, Ciudad de México

ID 91       The Soft Skills as a Drivers of Customer Service in the Automobile Dealers
Roxana Dalila Escamilla Vielma, Adriana Segovia-Romo, Jesús Fabián López, Faculty of Public Accounting and Administration- FACPYA,

Autonomous University of Nuevo León – UANL, Av. Universidad S/N col. Ciudad Universitaria, San Nicolas de los Garza, Nuevo León, México.

ID 94       Curriculum Revision of a Ph.D. program in Technology Management to Keep it Relevant and Manageable 
A. Mehran Shahhosseini, M. Affan Badar, Farman A. Moayed, James N. McKirahan, and Cindy L. Crowder, College of Technology, Indiana State University, Terre Haute, IN 47809, USA

ID 95       The Toyota Production System Principles and Behaviors in a Higher Education Institution Classroom
Fernando Gonzalez-Aleu, Department of Computer Systems and Industrial Engineering, Universidad de Monterrey, San Pedro Garza García, NL, 66238, México

Jesus Vazquez-Hernandez, Innovation and Strategy, Advanced Value Chain Institute, San Pedro Garza García, NL., 66250, Mexico

Mario Alberto Del Valle Velez, Vicepresidente, Asociación de Exbecarios de Mexico en Japón, Miguel Hidalgo, Ciudad de México, Mexico

ID 96       Impact of organizational culture in shaping organizational citizenship behavior: case of five-year training for suppliers of international steel companies
María Mayela Terán Cázares, Investigation- Professor, Facultad De Contaduría Pública y Administración, Universidad Autónoma De Nuevo León, Av. Universidad s/n Cd. Universidad C.P. 66455. San Nicolás de los Garza, Nuevo León, México

Mónica Blanco Jiménez, Investigation- Professor, Facultad De Contaduría Pública y Administración, Universidad Autónoma De Nuevo León, Av. Universidad s/n Cd. Universidad C.P. 66455. San Nicolás de los Garza, Nuevo León, México

Blanca Nelly Rodríguez Garza, Professor,Facultad De Contaduría Pública y Administración, Universidad Autónoma De Nuevo León, Av. Universidad s/n Cd. Universidad C.P. 66455. San Nicolás de los Garza, Nuevo León, México

Ivon Abigail González Garza, Student, Facultad De Contaduría Pública y Administración, Universidad Autónoma De Nuevo León, Av. Universidad s/n Cd. Universidad C.P. 66455. San Nicolás de los Garza, Nuevo León, México

ID 97       An Analysis of Visual Subitization Across Different Modes of Peripheral Vision
Juni Kim, Stanford Online High School, Redwood City, CA 94063, USA

ID 98       A Systematic Review on Factors Affecting Remote Working Employees During the COVID-19 Pandemic
Narmada Siyambalapitiya and Ruwan Wickramarachchi, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID 99       The Alternatives on Last Mile Delivery Logistics: Insights on Customers’ Preferences
Bruna Meire Kuhl Gomes, Cassiana Teza, Gabriel Cassino, Rodrigo Luiz Gigante, Henrique Ewbank, Facens University, Sorocaba, SP, Brazil

ID 100      Agile Management for Industrial Engineering Capstone Projects – Overcoming the COVID 19 challenge
Miguel Rocha, Edgar Barbosa and Carlos Gonzalez, Department of Industrial Engineering, Tecnológico de Monterrey, Querétaro, México

Cesar Vega, Tecnológico de Monterrey, Life and Career Center, Tecnológico de Monterrey, Querétaro, México

ID 101      Development and Application of an e-Kanban System in the Automotive Industry
Bárbara Romeira, DEGEIT, University of Aveiro, Campus Universitário de Santiago 3810-193, Aveiro, Portugal

Francisco Cunha, FSC Consulting, Portugal

Ana Moura, GOVCOPP / DEGEIT, University of Aveiro, Campus Universitário de Santiago 3810-193, Aveiro, Portugal

 

ID 105      A Systematic Review on Factors Affecting Lean Marketing Readiness in the Retail Sector in Sri Lanka
Apoorwama Illanganthilake, Ruwan Wickramarachchi, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID   110   Study of Implementation Planning of Electronic Road Pricing System on Jakarta
Andri Irfan Rifai, Faculty of Civil Engineering and Planing, University of Internasional Batam, Indonesia

Yasmin Ramadian, Muhammad Isradi, Amar Mufhidin, Faculty of Civil Engineering and Planing University of Mercubuana, Jakarta, Indonesia

ID  111   Analysis of Pedestrian Services in Metropolitan Cities: Case of Jakarta Business Area
Andri Irfan Rifai, Faculty of Civil Engineering & Planning, University of Internasional Batam, Indonesia

Adinda Fajarika Akhir, Muhammad Isradi, Amar Mufhidin, Faculty of Civil Engineering & Planning, University of Mercu Buana Jakarta, Indonesia

ID   112   Analysis Of Pavement Thickness Planning And Overlaying Method On Trans Sumatera Toll Road, Pekanbaru – Dumai
Muhammad Isradi,Joewono Prasetijo, Nurani Hartatik, Faculty of Engineering and Technology, University Tun Hussein Onn Malaysia, Malaysia

Indah Suryaningtyas, Widodo Budi Dermawan, Faculty of Engineering, University Mercu Buana Jakarta, Indonesia

Andri Irfan Rifai, Faculty of Civil Engineering and Planning, University of International Batam, Indonesia

ID  113  The Influence of Technology-based PBL Learning Model, Learning Method, Learning Motivation on Entrepreneurship Attitudes in Economics Education Department students of STKIP PGRI Jombang
Munawaroh, Nanik Sri Setyani, and Lina Sulistyowati, Economic Education Department, STKIP PGRI Jombang Pattimura street III/20, Jombang-East Java, Indonesia

 

ID  115  Profile of Student’s Mathematical Representation based on Teacher’s Accepted-Promoted-action
Tria Rahayu, Jauhara Dian Nurul Iffah, and Wiwin Sri Hidayati, Matematics Education Master Program, STKIP PGRI Jombang, Jl. Pattimura III, Jombang 61471, Indonesia

ID  116   The Effect Of Disruptive Era And New Product On Innovative Product Launches
Yusuf Amrozi, Dwiky Arfiansyah Nugroho, Rike Excella Putri, Universitas Islam Negeri Sunan Ampel Surabaya, Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia

ID  117   The Mediating Role of Work Environment in Relationship Between Leadership and Job Promotion on Employee Performance
Yohanes Sugiyanta, Joko Suyono, Narotama University, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, Sekolah Tinggi llmu Ekonomi Mahardhika, Surabaya, Indonesia

Zulifah Chikmawati, Universitas Nadlatul Ulama Sidoarjo, Indonesia

Che Zalina Zulkifli, Universiti Pendidikan Sultan Idris, Malaysia

ID 118      Organizational Factors Affecting the ISMS Effectiveness in Sri Lankan IT Organizations: A Systematic Review
K.M.N. De Abrew and Dr. Ruwan Wickramarachchi, Department of Industrial Management, University of Kelaniya, Sri Lanka

 

ID 120      The Impact of Customer Loyalty and Satisfaction on Performance at a Lighting Company
Khathutshelo Mushavhanamadi, M. F. Hlengani, Department of Quality and Operation Management, University of Johannesburg, South Africa

ID 121      The Impact of Project Governance on Project Delivery In The Enterprise Project Management Office Within South African Bank
Khathutshelo Mushavhanamadi, N.Phatlhane, Department of Quality and Operation Management, University of Johannesburg, South Africa

ID 123      Standard Model Baby Incubator Product Development with Quality Function Deployment (QFD) Method and Simulation Application
Waluyo Prasetyo, Rina Sri Wulandari, Untung Usada, Agus Rachmad Purnama, Muhammad Mansur Yafi, Achmad Fauzi Alfaris, Industrial Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo, Indonesia

ID 124      Design Of Feasibility Study Parameters For Selection Of B3 Waste Treatment Location In Bangkalan District   

Rina Sri Wulandari, Waluyo Prasetyo, Luqman Hakim, Taqwanur, Industrial Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo, Indonesia

Medya Ayunda Fitri, Chemical Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo, Indonesia

ID 125      Business process reengineering in public sector organizations: Systematic literature review of critical success factors
A.A.T.M. Amarasinghe, Ruwan Wickramarachchi, Department of Industrial Management, University of Kelaniya, Kelaniya, Sri Lanka

ID 126      A Cost-Benefit Approach to Thermo-Processing Equipment Safety Regulation Analysis            

Motshumi Joseph Diphare, Hannelie Nel and Jan-Harm C. Pretorius, Postgraduate School of Engineering Management, University of Johannesburg,Johannesburg, South Africa

ID 129      Determinant Factors for the Sustainability of SMEs in the Northern Mexican Restaurant Sector: A Documentary Perspective
Evelin Anahí Torres-Torres; Alfonso López-Lira Arjona; César Eduardo Perales Martínez, Ciencias económico y Administrativo, Facultad de Contaduría Pública y Administración, Av. Universidad s/n Cd. Universidad, San Nicolás de los Garza, Nuevo León, México.

ID 130      An Instrument to Measure Work Stress on Mexican Academic Staff
César Eduardo Perales Martínez, María Mayela Terán Cázares and Evelin Anahí Torres Torres, Centro de Desarrollo Empresarial y Posgrado de FACPyA, Universidad Autónoma de Nuevo León, Monterrey, México

ID 131      Analysis of Building Construction in a Colombian Case from a Total Quality Management Perspective
Julián David González Zapata, Bertha Viviana Ruales Guzmán, Lina Patricia Velasquez Mora, Department of Computer and Industrial Engineering,Universidad Nacional de Colombia, Bogotá D.C., Colombia

Laura Milena Hernández Castañeda, Department of Civil and Agricultural Engineering, Universidad Nacional de Colombia, Bogotá D.C., Colombia 

 

ID 134      Digital Competencies of University Teachers in Universities in the Times of Covid-19, Cusco-Perú, 2020
Elena Sonia Paula Espinoza Ríos, Felipe Néstor Gutarra Meza,  Miriam Ingrid Espinoza Vilca Escuela Académico Profesional de Sistemas e Informática, Universidad Continental, Av. San Carlos 1980, Urb. San Antonio, Huancayo, Perú

Vilma Canahuire Montufar, Escuela Profesional de Ciencias Administrativas, Universidad Nacional de San Antonio Abad del Cusco, Cusco, Perú

ID 135      Optimization of the Signal Noise Ratio index using Simultaneous Perturbation Stochastic Approximation Algorithm
Juan Carlos Castillo García, Jesús Everardo Olguín Tiznado, Faculty of Engineering, Architecture, and Design, Autonomous University of Baja California, Carretera Transpeninsular Ensenada – Tijuana No. 3917 Colonia Playitas, 22860 Ensenada, Baja California México.

Jorge Luis García Alcaraz,Jose Roberto Diaz Reza, Dept. of Industrial Engineering and Manufacturing, Autonomous University of Ciudad Juárez, Ciudad Juárez, México

Arturo Realyvasquez Vargas, Department of Industrial Engineering, Tecnológico Nacional de México/I.T. Tijuana, Tijuana, Baja California, México

Karina Cecilia Arredondo Soto, Chemical Sciences and Engineering Faculty, Universidad Autónoma de Baja California, Calzada Universidad 14418, Parque Industrial Internacional, Tijuana, Baja California 22390, Méxic

ID  136          Factors Affecting the Fresh Flower Cold Chain Logistics
Jirapat Wanitwattanakosol and Yuqin Zhou, College of Arts, Media and Technology, Chiang Mai University, Chiang Mai, 50200, Thailand

ID 137      A layout design using a production line balancing approach
Marlene Brás, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal

Ana Moura, Department of Economics, Management, Industrial Engineering and Tourism, GOVCOPP – Systems for Decision Support Research Group, University of Aveiro, Aveiro, Portugal

ID 138      Proposals to Strengthen the Implementation of Quality Management in Higher Education
Catalina Torregrosa Morales, Bertha Viviana Ruales Guzmán, Brayan Camilo Vega Fuentes, Daniel Enrique Saavedra Castañeda, Systems and Industrial Engineering Department, Universidad Nacional de Colombia, Bogotá, Colombia

ID 141      Design of an Electronics Swapping System for Electric Guitars
Helgi S. Waage-Delgadillo, Rafael González-Parra, Alba Covelo, Miguel A. Hernandez, Raúl Valdéz and Arturo Barba-Pingarrón, Surface Engineering Center (CENISA) – Engineering Faculty, National Autonomous University of Mexico, Circuito Exterior. Ciudad Universitaria. 04510 CDMX

Jesús M. Dorador González, National School of Higher Studies – Engineering Faculty, National Autonomous University of Mexico, Juriquilla, Querétaro

ID 142      Analysis of the Correlation Between Imposter Syndrome and Grade Level of Online High School Students
Ester Weinhardt, Stanford Online High School, Redwood City, 94063 CA

 

ID 144      Evaluation Of The Feasibility Of Centralization Of Warehouses In The Construction Company VIDUSA
Ana Paula Ocañas Morales, Brando M. Rodríguez Vallejo, Ricardo C. Lozano Cantú, Business Management Engineering, Industrial and Systems Engineering, Industrial and Systems Engineering, University of Monterrey, México

Refugio Chávez Hernández, Doctorate in Supply Chain Management and Logistics, University of Monterrey, México.

ID 145      Strategic Value Propositions to Increase Competitiveness in a Tourism Cluster
Teresa Verduzco-Garza, Industrial Engineering, Engineering School, University of Monterrey UDEM, San Pedro Garza Garcia, NL, México

J. Gerardo Rodríguez Beltrán and José Pablo Nuño de la Parra, Popular Autonomous University of Puebla UPAEP Puebla, Pue, Mexico

ID 146      Establishing Risks of Food Supply Chains for Small and Medium Food Manufacturing Companies in Malaysia
Siti Aishah Hadawiah Ahmad and Mohd Nizam Ab Rahman, Department of Mechanical and Manufacturing, The National University of Malaysia,Selangor, Malaysia

Ariff Azly Mohamed, Department of Business and Management, Universiti Teknologi Mara, Selangor, Malaysia

 

ID 148      Total Quality Management, Just In Time And Its Impact On Supply Chain Management In Manufacturing Companies
Diana Maricela Vasquez Treviño, Mónica Blanco Jiménez, Jesús Fabián López Pérez, Sergio Armando Guerra Moya, Facultad de Contaduría Pública y Administración , Universidad Autónoma de Nuevo León, Cd. Universitaria, N.L. México

 

ID 150      Designing a Data Governance Model to Implement GDPR in Sri Lankan Enterprises
P.A. Indhumini Ranathunga, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka

Dr. Ruwan Wickramarachchi, Senior Lecturer, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka

ID 151      The Factors that Impact the Internationalization of the Artisanal SMES of the Citrus Region of the State of Nuevo León (Theoretical Framework)
Yamileth Aguilar García and Diana Maricela Vasquez Treviño, Facultad de Contaduría Pública y Administración, Universidad Autónoma de Nuevo León, Ciudad Universitaria, San Nicolás de los Garza, NL.

Mónica Blanco Jiménez, Facultad de Contaduría Pública y Administración, Universidad Autónoma de Nuevo León, Ciudad Universitaria, San Nicolás de los Garza, NL.

Juan Patricio Galindo Mora, Facultad de Contaduría Pública y Administración, Universidad Autónoma de Nuevo León, Ciudad Universitaria, San Nicolás de los Garza, NL

 

ID 153 Participatory Ergonomics in a Manufacturing Company in Peru
María Teresa Noriega Araníbar and Bertha Díaz Garay, Industrial Engineering Program Universidad de Lima, Surco, Lima, Perú

ID 161      The Influence of Entrepreneurial Orientation on Competitive Advantage and Company Performance
M. Sulhan, Yudharta University of Pasuruan, Indonesia

Wahyu Astutik, College of Administrative Sciences Panglima Sudirman Surabaya

Dodik Wahyono, College of Administrative Sciences Panglima Sudirman Surabaya

Muhammad Arifin, College of Administrative Sciences Panglima Sudirman Surabaya

Moh. Mukhrojin, College of Administrative Sciences Panglima Sudirman Surabaya

ID 162      Evaluation of an electric go-kart with lithium-ion and nickel-metal hydride batteries
Gustavo Alvarez-Coello, ERGON – Automotive Engineering Research and Development Center, Universidad del Azuay,Cuenca, Ecuador

Andrés Idrovo-Pauta

Daniel Cordero-Moreno

Efrén Fernández-Palomeque

ID 164      Searching for Key Topics around Artificial Intelligence and Machine Learning as a Process Optimization Driver
Federico Walas Mateo, Universidad Nacional Arturo Jauretche, Buenos Aires, Argentina

Andres Redchuk, Universidad Nacional de Lomas de Zamora. Facultad de Ingeniería. Buenos Aires, Argentina.ETSII. Universidad Rey Juan Carlos. Madrid. España

ID 165      Performance and Emission Characteristics of Diesel-Biodiesel-Ethanol Blends in a Heavy-Duty Compression Ignition Engine at Simulated High Altitudes
Julio C. Cuisano and Soin E. Puma, Mechanical Department of Engineering Faculty, Pontificia Universidad Católica del Perú, Lima, Perú

ID 166      Developing a Performance Measurement Framework for Logistics Service Providers
Paitoon Varadejsatitwong, Thammasat Business School, Thammasat University, Bangkok, Thailand

Ruth Banomyong, Dean, Thammasat Business School, Thammasat University, Bangkok, Thailand

Puthipong Julagasigorn, Thammasat Business School, Thammasat University, Bangkok, Thailand

 

ID 169      Measurement of the adaptability of practical learning units to the non-school modality
Arlethe Yarí Aguilar Villarreal, Cinthya Rocío Ramos Jiménez, Héctor Fabián Dávila García, Enrique Estanislao Ortiz Fuentes, Universidad Autónoma de Nuevo León, Facultad de Ciencias Químicas, Ave. Universidad S/N Cd. Universitaria, San Nicolás de los Garza Nuevo León

 

ID 171      Android-Based Interactive Multimedia Development Integration Of Poetry Text Material With Islamic Values   
Tuti Kusniarti, Universitas Muhammadiyah Malang

Dina Putri Juni Astuti, IAIN Bengkulu

Wahyudi Rahmat, STKIP PGRI Sumatera Barat

Samsiarni, STKIP PGRI Sumatera Barat

Aruna Laila, STKIP PGRI Sumbar 

ID 179      Managing Islamic Elementary Students’ Reading Skill through SQ3R Strategy      
Yuli Ani Setyo Dewi, Sekolah Tinggi Ilmu Tarbiyah NU Al Hikmah Mojokerto

Indrya Mulyaningsih, Institut Agama Islam Negeri Syekh Nurjati Cirebon

Winci Firdaus, Badan Pengembangan dan Pembinaan Bahasa

Ixsir Eliya, IAIN Bengkulu

Vita ika sari, universitas pancasakti tegal

ID 180      Management of Information and Communication Technology (ICT) Learning Packages
Riza Faishol, Institute Agama Islam (IAI) Ibrahimy Genteng Banyuwangi, Indonesia

Syihaabul Hudaa, Institut Teknologi dan Bisnis Ahmad Dahlan Jakarta

Asrizal Wahdan Wilsa, STKIP NU Indramayu

Kiftian Hady Prasetya, Universitas Balikpapan

Ari Musdolifah, Universitas Balikpapan

ID 181      Coordinating Gamification in a Blended Learning Entrepreneurship Course: Discussing Student Learning and Achievement Motivation
Nisaul Barokati Seliro Wangi, Universitas Islam Darul ‘Ulum Lamongan, Indonesia

Ulfah Mey Lida, IAIN Kudus, Indonesia

Veni Nurpadillah, IAIN Cirebon, Indonesia

Yunita Suryani, Universitas PGRI Ronggolawe, Indonesia

Ninik Mardiana, University Dr. Soetomo Surabaya, Indonesia

ID 182      Arranging the Reliable and Valid Assessment’s Instrument for Business Model Canvas Comprehension
Nisaul Barokati Seliro Wangi, Universitas Islam Darul ‘Ulum Lamongan, Indonesia

Rokhmad Budiyono, Sekolah Tinggi Ilmu Ekonomi Semarang

Dwi Novaria, IAIN Pekalongan

Ratna Nurdiana, Universitas PGRI ADIBUANA Surabaya

Ahmad Hariyadi, IKIP PGRI Bojonegoro

ID 183      Information Systems in Digital Transformation: Practical case in an automotive industry company and Critical Success Factors
Ana Inês Ribas, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro 3810-193, Aveiro, Portugal

Leonor Teixeira, Institute of Electronics and Informatics Engineering of Aveiro (IEETA), Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro 3810-193, Aveiro, Portugal

ID 185  Impact of Material and Labour Cost Overruns on Contractors’ Budgeted Cost: The Case of Building Construction Projects in Sri Lanka
R.D.W.W. Jayathilaka, K.G.A.S. Waidyasekara and D.C. Sirimewan, Department of Building Economics, University of Moratuwa, Sri Lanka

ID 186      Application of Lean Manufacturing tools to decrease non-conforming products in a zinc refinery
Alberto Flores-Pérez, Juan Quiroz-Flores and Martín Collao-Diaz, Facultad de Ingeniería y Arquitectura, Universidad de Lima, Lima, Perú

Iván De Fuentes Pérez, Independent mechanical project consultant, Industrial Engineering Program, University of Applied Sciences, Perú

ID 187      Technology Acceptance Model to Solve  Mobile Payment Problem for SMEs
Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Destiana Kumala Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia 11480

Hendra Alianto Information System Department School of Information System Bina Nusantara University, Jakarta, Indonesia

Prasetya Cahya Saputra Information Systems Department School of Information system Bina Nusantara University Jakarta, Indonesia 11480

Rivaldhy N. Muhammad, Study Program of Law, Faculty of Law, Social and Political Sciences, Terbuka University, Indonesia

ID 188      Technology Acceptance Model to Solve E-Learning Problem for Teacher in School
Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Yenny Desnelita, Institut Bisnis dan Teknologi Pelita, Pekanbaru, Indonesia

Eka Sasmita Mulya, Civil Engineering, Politeknik Negeri, Jakarta, Depok Indonesia

Hendra Alianto, Information System Department, School of Information System, Bina Nusantara University, Jakarta, Indonesia

ID 192      Measuring the Risk Level of Employees for COVID-19: A Case in Government Sector
Anthony Sanchez, Jerome Liwanag, Wajid Mariño, Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila, 1002

ID 193      A Risk Level Assessment of Food Delivery Riders for COVID-19
Lorenzo T. Caday, Krisanta Ana E. Draculan, Kianna Denise C. Villapando, Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila, 1002

 

ID 195      Increasing Profitability Through the Implementation of an Integrated Balance Score Card -Objectives Key Results Model in a Digital Agency: The Peruvian Case
Iyari Rojas-Chipana, Nicolas Aguilar-Pelizzoli, Juan Carlos Quiroz-Flores, Martín Collao-Diaz and Alberto Flores-Perez, Facultad de Ingeniería y Arquitectura, Universidad de Lima, Lima, Perú

ID 196      Order Picking Improvement through Storage Assignment Optimization and Human Error Identification: A Case Study of Automobile Seat Manufacturer
Niniet Indah Arvitrida, Muhammad Andhika Adiwidya, Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember,Surabaya 60111, Indonesia

ID 197      An Overview of the Factors Affecting the E-commerce Readiness of SMEs in Sri Lanka
Hansika Kelambi Arachchige, Department of Industrial Management, University of Kelaniya, Sri Lanka

Ruwan Wickramarachchi, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID 199      Factors of the E-commerce that are Directly Related to the Consumer’s Purchase Motivation in Nuevo León, Mexico
Valentín Lara-Jiménez , Carolina Solís-Peña, UANL School of Chemical Sciences, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, NL 66451, México

Federico G. Figueroa-Garza & Abel Partida-Puente, UANL School of Business, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, NL 66451, México

ID 200      Determination of Factors for Sustainability in Resilient Supply Chain in the Automotive Component Manufacture Industry
Carolina Solís Peña, Valentín Lara Jiménez,  Juan Manuel Hernández Ramos & Mónica Blanco Jiménez, Industrial Engineering Administration, University of Nuevo Leon, San Nicolás de los Garza, Nuevo León, 66460, México

ID 203      Quality 4.0: Entity Relationship Model for inspection and repair processes in Aerospace domain
Ramy M. Khalifa, Department of Mathematics and Industrial Engineering, École Polytechnique de Montréal, Montréal, Québec, Canada
Department of Mechanical Design, Faculty of Engineering, Helwan University, Cairo, Egypt

Soumaya Yacout, Department of Mathematics and Industrial Engineering, École Polytechnique de Montréal ,Montréal, Québec, Canada

Samuel Bassetto, Department of Mathematics and Industrial Engineering, École Polytechnique de Montréal, Montréal, Québec, Canada

ID 204      The Production Planning Practices and Techniques Impact on Operational Costs in South African Manufacturing industries

Selowa Brian Tumiso, Quality and Operations Management Department, University of Johannesburg, South Africa

Bakama Eric Mikobi, Quality and Operations Management Department, University of Johannesburg, South Africa

Dr. Khathutshelo Mushavhanamadi, Quality and Operations Management Department, University of Johannesburg, South Africa

ID 205      The Impact of Adopting Total Quality management Practices on South African SME’s Performance
Silima Tshenzhemo Neo, Quality and operations management Department, University of Johannesburg

Bakama Eric Mikobi, Quality and operations management Department, University of Johannesburg

Dr. Khathutshelo Mushavhanamadi, Quality and operations management Department, University of Johannesburg

ID 206      How can BPM and Lean practices accelerate digital transformation? Evidence based on a practical case
Mariana Carvalho, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, 3810-193, Aveiro, Portugal

Leonor Teixeira, Institute of Electronics and Informatics Engineering of Aveiro (IEETA), Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro 3810-193, Aveiro, Portugal

ID 207      Smart Warning system for the Rotating parts based on Cloud Computing
Amr Mohamed Ali, Department of Mechanical Design Engineering Faculty of Engineering, Helwan University, Cairo, Egypt

Soumaya Yacout, Department of Mathematic and Industrial Engineering, École Polytechnique, Montréal, Québec, Canada

El-Adl Eladl Rabeih, Department of Mechanical Design Engineering Faculty of Engineering, Helwan University, Cairo, Egypt

Yasser Shaban, Department of Mechanical Design Engineering Faculty of Engineering, Helwan University, Cairo, Egypt

ID 208      Bond Graphs for Manufacturing Control: Model’s Improvement
Arthur Sarro Maluf, Production Engineering Department, Federal University of São Carlos, São Carlos, Brazil

Juliana Keiko Sagawa, Production Engineering Department, Federal University of São Carlos, São Carlos, Brazil

Maíra Martins Da Silva, Mechanical Engineering Department, University of São Paulo, São Carlos, Brazil

ID 209      Digitizing a Daily Continuous Improvement System: A Practical Case in a Portuguese Company
Luís Franco, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, Aveiro Portugal

Juliana Salvadorinho, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, Aveiro Portugal

Leonor Teixeira, Institute of Electronics and Informatics Engineering of Aveiro (IEETA), Department of Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, Aveiro Portugal

ID 210  Optimization of shift scheduling for medical staff: an application in the Outpatient Servuccion
Hernando Garzón Saenz, CIPTEC research group – Faculty of Engineering – Technology Program in Industrial Production Fundacion Universitaria Tecnologico Comfenalco, Cartagena de Indias, Colombia

Andrés Redchuk, ETSII. Department of Computer Sciences. University Rey Juan Carlos. Madrid. Spain
Director of Operational Excellence and Process Improvement Institute. School of Engineer, University of Lomas de Zamora. Argentina. Department of Computer Sciences. University Rey Juan Carlos. Madrid. Spain

ID 211      Process Improvement for High Precision Components at Medical Devices Company (MDC)

Gamaliel Negrón Guzmán, Joshua Ríos Vachier and Jannette Pérez-Barbosa, Department of Engineering, Universidad Ana G. Méndez,

Gurabo, Puerto Rico 00778, USA

ID 212      IoT enabled indoor air quality monitoring system for sustainable health management in an industry laboratory, a case study
Nicolas Ferreira, Mechatronics Engineering Department, Universidad del Cono Sur de las Américas, Asunción, PARAGUAY

Matias Sanchez, Electronics Engineering Department, Universidad Politécnica y Artística del Paraguay, Asunción, PARAGUAY

Walter López, Industrial Safety Management, PETROPAR, Villa Elisa, PARAGUAY

ID 213      Processed Food Imports that Improve Company Competitiveness in Emerging Countries
Monica Blanco-Jimenez, Angelica Tejeda-Villanueva, Diana M. Vasquez-Treviño,Maria de Jesus Araiza Vazquez, Facultad de Contaduría Pública y Administración, Universidad Autónoma de Nuevo León, San Nicolas de los Garza, Nuevo León, México

ID 214      Productivity Improvement in a Sugar Company: A Lean management approach
Maximiliano Arroyo Ulloa, Faculty of Engineering, Universidad Católica Santo Toribio de Mogrovejo, Chiclayo, Peru

Lucio Llontop Mendoza, Universidad Católica Santo Toribio de Mogrovejo, Chiclayo, Peru, Lima, Peru

Javier Beltran Reyes, Business Intelligence Department, Comercio-Group, Lima, Peru

ID 217      Supporting digital transformation using Business Process Management : Proposal of a digital tool
Márcia Silva, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, Aveiro, Portugal

Maria João Rosa, Centre for Research in Higher Education Policies (CIPES), Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro 3810-193, Aveiro, Portugal

Leonor Teixeira, Institute of Electronics and Informatics Engineering of Aveiro (IEETA), Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro 3810-193, Aveiro, Portugal

ID 218      A new model for identifying, capturing and transmitting knowledge: A proposal based on practical experience
Luís Gomes, Department Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro, 3810-193, Aveiro, Portugal 

Leonor Teixeira, Institute of Electronics and Informatics Engineering of Aveiro (IEETA), Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro,3810-193, Aveiro, Portugal

ID 222      Electromagnetic and Thermal Performances of Multi U and V Layer Magnet of Permanent Magnet Assistant Synchronous Motor for Electric Vehicles
Bui Minh Dinh, Hanoi University of Science and Technology

Ho Manh Tien, Faculty of Electrical-Electronic Engineering, University of Transport and Communications (UTC)

ID 223      RRU 5G 8T8R Heatsink Embedded Vapor Chamber and Heat pipe Assemlies
Minh Dinh Bui, Hanoi University of Science and Technology, No 1, Dai Co Viet street, Hai Ba Trung district, Ha Noi

Duc-Thinh Nguyen, Quoc Hung Nguyen and Van Manh Khong, Department of Mechanical Engineering, Viettel High Technology Industries Corporation, Hanoi, Vietnam.

ID 224      Simulation and Analysis of the Actuation System in a Camless Piston Engine
Andrés M. Sada-Regalado, David F. Novella-Rodriguez and Juan C. Tudon Martínez, Universidad de Monterrey, School of Engineering and Technologies, 66238 San Pedro Garza García, Nuevo León, México

ID 225  Comparison of Behavioral Customer Segmentations for Private Labels using Clustering Algorithms
Carlos Hernández, Departamento de Procesos Industriales, Universidad Católica de Temuco, Temuco, Chile
Magaly Sandoval, Departamento de Ingeniería Industrial y Sistemas, Universidad de La Frontera, Temuco, Chile

ID 226    Behavioral Segmentation for Supermarket Customers Using Unsupervised Machine Learning Algorithms
Carlos Hernández, Departamento de Procesos Industriales, Universidad Católica de Temuco, Temuco, Chile
Galo Paiva, Departamento de Ingeniería Industrial y Sistemas,Universidad de La Frontera, Temuco, Chile

ID 227      Technology innovation in supply chain logistics: A Structured Literature Review (2003-2019)
Hilda Kundai Chikwanda and Andile LN Zulu, Graduate School of Technology Management (GSTM), Faculty of Engineering, Built Environment and Information Technology, University of Pretoria, Pretoria, South Africa

 

ID 228 Non-homogeneous Poisson Process modelling to determine the reliability and failure cost of locomotives during the warranty phase: A study of the South African Railway

B.B.S. Makhanya, H. Nel and J. H.C Pretorius, Faculty of Engineering and Built Environment University of Johannesburg, Johannesburg, Gauteng, South Africa

ID 229      Implementation of Six Sigma as Quality Improvement in a South African Municipality
Paul Makibelo, Bheki Makhanya and Hannelie Nel, Department of Engineering Management, University of Johannesburg, South Africa

ID 230 Optimal Body-In-White Dimensional Quality Management in the Body Shop Area in a Car Manufacturing Plant
Sivuyile E. Gayiya, Bheki Makhanya and Hannelie Nel, Faculty of Engineering and Built Environment
University of Johannesburg, Johannesburg, Gauteng, South Africa

ID 244      Optimization of Oil Well Production Using Binary Programming Method: Case Study Offshore Platform
Deni Ahmad Taufik, Master of Industrial Engineering Student, Universitas Mercu Buana, Kembangan, Jakarta, Indonesia

Choesnul Jaqin, Master of Industrial Engineering Department, Universitas Mercu Buana, Kembangan, Jakarta, Indonesia

Humiras Hardi Purba, Master of Industrial Engineering Department, Universitas Mercu Buana, Kembangan, Jakarta, Indonesia

ID 245      Biodynamic Suspension Model in a Comfort-Oriented QoV Control System
Abelardo Rodriguez-Moreno, E.A. Sánchez-Segoviano, L.A. Santa Cruz, and L.C. Félix-Herrán, School of Engineering and Sciences, Tecnologico de Monterrey, Hermosillo, SON, 83000, Mexico

Jorge de-J. Lozoya-Santos, School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey, NL, 64849, Mexico

Juan C. Tudón-Martínez, División de Ingeniería y Tecnología, Universidad de Monterrey, Monterrey, NL, 66238, México

ID 247      Qualitative Assessment of Bioaerosol and Improvement of Indoor Air Quality of Grocery Store in Tuguegarao City
Janus Clifford R. Calagui, Juan Fernando C. Consuegra, Lemuel A. Plaza, John Vergel S. Quising, School of Mechanical and Manufacturing Engineering, Mapua University, Muralla St., Intramuros, Manila, Philippines 1002

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila, Philippines

ID 248      Design and Fabrication of a Human-Powered Vacuum System for Milking Carabaos and Cows
Ron Paulo D. Cueto, Chris Anthony B. Javier, Daniel A. Pangilinan, Joshua H. Santos, Isla F. Igmedio, Jr., School of Mechanical and Manufacturing Engineering, Mapua University, Muralla St., Intramuros, Manila, Philippines 1002

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 249      Assessment of Indoor Air Quality of Modernized Jeepney in Manila
Arch Joseph V. Ayala, Bon Kenoh R. Fernando, John Luis G. Joven, John Jerry B. Soreta, Engr. Ricky D. Umali

School of Mechanical and Manufacturing Engineering, Mapua University, Muralla St., Intramuros, Manila, Philippines 1002

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila, Philippines

ID 250      Ergonomic Design of Taho Cart with Shock Absorber System
Jared Elias G. Baltazar, Marwin C. Bontes II, John Carl R. Narvarte, Gio Justin V. Reyes, Jaime Honra, Ph.D., School of Mechanical and Manufacturing Engineering, Mapua University, Muralla St., Intramuros, Manila, Philippines 1002

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila, Philippines 1002

ID 251      Applying Clustering Algorithm on Poverty Analysis in a Community in the Philippines
Michelle P. Repollo, School of Information Technology, Mapua University, Manila, Philippines

Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines

ID 253      Strategies to Improve the Logistics of a COVID-19 Screening Process within a Lean Six Sigma Framework
Jeanne-Marie Lawrence, Teaching Instructor, Department of Technology Systems, College of Engineering and Technology, East Carolina University, Greenville, NC 27858, USA

ID 254      Information System Plan for Chew & Brew Milk Tea Company (A Case Study)
Karina Dizon, Dave Pagaduan, David Quindoza, Raphael Tandoc, Grace Lorraine Intal, School of Information Technology, Mapúa University, Makati, NCR, Philippines

 

ID 258      Synthesis and characterization of hydroxyapatite powder derived of eggshell by precipitation method
Samira Tlili, Saida Bouyegh, Kotbia Labiod, Noura Traiaia and Mohamed Hassani, Research Center in Industrial Technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria

Bilal Ariche, Badji Mokhtar University, Annaba, Algeria

ID 259      Understanding the Business Considerations for Future Model-building in the Financial Industry
Henry I Schnetler, Marne De Vries, Wilna Bean, Department of Industrial and Systems Engineering, University of Pretoria, Pretoria, South Africa

ID 260 Targeted Key Indicators for Improving National Innovation Performance
Siham HAMIDI, Abdelaziz BERRADO, Equipe AMIPS – Ecole Mohammadia d’Ingénieurs, Mohamed V University, Avenue Ibn Sina, BP765, Agdal, Rabat, Maroc

ID 261      Information System Plan for West Corner Hotel  ( A Case Study)
Milstein Rei Cadorniga, Ashly Mariel Cruz, Coleen Dela Cruz, Kathleen Suello, Grace Lorraine Intal, School of Information Technology, Mapúa University,Manila Philippines

ID 262      Information Systems Plan for La Teacia Artisan Milk Tea (A Case Study)  
Noel D. Basañez, Jr., Angelica Rose D. Bauzon, Kathleen R. Santos, Tristan Andrei T. Saura, Grace Lorraine Intal, School of Information Technology, Mapua University,Makati City, Philippines

ID 263      Strategic Information Systems Planning for the Improvement of RS Top Pizza’s Business Process
Dion Karl V. Mandario, Jhustine C. Landingin, Grace Lorraine D. Intal, School of Information Technology Mapua University, Makati, NCR, Philippines

ID 264      Characterization of the assessment of university education learning in times of COVID-19 based on a systemic approach
Carlos Oqueliz, Silvia Campos, Robert Castro, Demetrio Mandujano, Mario Chauca, Engineering Faculty, Ricardo Palma University, Av. Alfredo Benavides 5440, Santiago de Surco 15039, Perú

ID 265      Raw Material Supply Configuration with Short Shelf Life in a Production Scenario MTS/MTO Minimizing Operational Risk and Cost
Lucas Ramírez Ramírez, Engineering Magister Program Student, Universidad de Antioquia, Medellín, Colombia

Carmen Elena Patiño Rodríguez, Industrial Engineering Department, Universidad de Antioquia, Medellín, Colombia

Gloria Milena Osorno Osorio, Industrial Engineering Program, Unidad Central del Valle del Cauca, Tuluá, Colombia

ID 266  An Integrated Framework of Balance Scorecard-PESTLE-Smart and Green Port for Boosting the Port Performance
Yugowati Praharsi, Fitri Hardiyanti, Devina Puspitasari, Ristanti Akseptori, and Aditya Maharani, Business Management Department, Shipbuilding Institute of Polytechnic Surabaya, Surabaya, Indonesia

ID 267      Metro Red/Line Purple Line Familiarization Training
Michael J. Thomas, M.A., California State University, Los Angeles, Los Angeles, CA 90032

ID 268      Two Decades of Closed-loop Supply Chain: A Bibliometric Analysis 
Imnatila Pongen, Department of Operations Management, Indian Institute of Management Ranchi, Jharkhand-834008, India

Pritee Ray, Department of Operations Management, Indian Institute of Management, Ranchi, Jharkhand-834008, India

ID 271      Statistical Analysis of the Relationship between the Sintering Process and Magnetic Energy on the Improvement of the Magnetic Properties of the Permanent Magnet BaFe12O19
Perak Samosir and Dwita Suastiyanti, Study Program on Mechanical Engineering, Institut Teknologi Indonesia, Jl.Raya Puspiptek Serpong, Kota Tangerang Selatan 15314

Wilson Rajagukguk, Faculty of Economics and Business, Universitas Kristen Indonesia, Jl. Mayjen Sutojo No.2, Cawang, Jakarta 13630, Indonesia

John Tampil Purba and Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

ID 272      The Incorporation of Eco-Friendly Light Vehicles in Logistics Distribution Models: A Systematic Review
Sebastián Zazueta-Nassif, Roberto Galarza-Tamez, Vicente Montemayor-Villarreal, Industrial and Systems Engineering, Universidad de Monterrey,San Pedro Garza Garcia, Mexico

Jenny Díaz-Ramírez, School of Engineering and Technologies, Universidad de Monterrey, San Pedro Garza Garcia, Mexico

ID 273  The Implementation of the Capable Solar Power Through Tackling Challenges: KwaZulu-Natal Region
Bantubenzani Nelson Mdlolo, Department of Industrial Engineering, Durban University of Technology, Durban, 4001, SA

Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, 4001, SA

ID 275      Determining Strategies for The Perfect Shade Mobile Application Using SWOT Analysis and Six Thinking Hats
Bryelle Timothy C. Nisperos, Joshua Yñigo N. Pascual, Jerome Patrick S. Ramos, Grace Lorraine D. Intal, School of Information Technology, Mapua University, Makati, Philippines

ID 276      SAFE: Smart Application for Emergency

John Nicolo T. Cruz, Gabrielle Angelo D. Gabatin, John Gerick B. Gabunilas, and Gloren S. Fuentes, School of Information Technology, Mapua University, Makati City, Metro Manila, Philippines

ID 277      Online Scheduling System for Doctors and Patients in a Hospital

Marion Rylan Q. De Guzman, Jonn Louis N. Ordoñez, Ronald O. Somocierra, and Gloren S. Fuentes, School of Information Technology, Mapúa University, Makati City, Metro Manila, Philippines

ID 278      ACOUSTIC NOISE AND FORCE REDUCTION OF HIGH SPEED SWITCHED RELUCTANCE MOTOR BY ROTOR DESIGNS
Bui Minh Dinh, Dang Quoc Vuong Hanoi University of Science and Technology

ID 292      Purview of the Baseline’s Construction for Vehicle Fuel Economy and its Statistical Limitations
Samantha Villarreal-Cavazos, Mariana Luis-González, Miguel Camacho-Assad and Jenny Díaz, School of Industrial and Systems Engineering, University de Monterrey, San Pedro Garza García, NL 66238, México

José I. Huertas and Antonio E. Mogro, School of Engineering and Science-EIC, Tecnológico de Monterrey, Monterrey, México

ID 293      Mediating Effect of Financial Performance on The Effect Green Innovation on Firm Value
Hidayatul Khusnah, Mardiyah Anugraini, Vera Putri Fabiola, Department of Accounting Faculty of Business Economics and Digital Technology Universitas Nahdlatul Ulama Surabaya Surabaya 60237, East Java, Indonesia

Riyan Sisiawan Putra, Departemen of Management Faculty of Business Economics and Digital Technology Universitas Nahdlatul Ulama Surabaya Surabaya 60237, East Java, Indonesia

ID 294      Request Management System  of an Airline’s Engineering Department: A Case Study
Ronnie Dela Cruz; Grace Lorraine D. Intal, School of -Industrial Engineering, School of Information technology, Mapua University, Intramuros Manila, Philippines

ID 297      Preschool Selection Criteria Amongst Parents using Best Worst Method (BWM)
Fatin Athirah Noor Azmi, Department of Production and Operation Management, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400, Batu Pahat, Johor, Malaysia

Rohaizan Ramlan, Centre of Research on Service and Operations Management (CRSOM), Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400, Batu Pahat, Johor, Malaysia

Shahryar Sorooshian, Department of Business Administration, University of Gothenburg, 41124 Gothenburg, Sweden

ID 299      Online Food Delivery (OFD) apps:  What do the customers look at?
Nurul Najiha Zolkiffli, Department of Production and Operation Management, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400, Batu Pahat, Johor, Malaysia

Rohaizan Ramlan, Chan Shiau Wei, Centre of Research on Service and Operations Management (CRSOM), Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400, Batu Pahat, Johor, Malaysia

ID 301      Optimal Location of a Central Warehouse for a Retail Painting Company: Practical Case in Mexico
Luis Antonio Guzmán-García, Diana Sánchez-Partida, José Luis Martínez-Flores and Patricia Cano-Olivos , Department of Logistics and Supply Chain Management, UPAEP University, 17 Sur 901, Barrio de Santiago, CP 72410 Puebla, Puebla, Mexico, Universidad Popular Autónoma del Estado de Puebla, Puebla, Puebla 72410, MEX

ID 304      Analyzing Different Factors Affecting Users’ Adoption Of Dost Starbooks In Region 12 Using Technology Acceptance Model
Nabil iA. iHadji iYassin, Department of Science and Technology Region 12, Koronadal City, South Cotabato, Philippines

ID 305      Resource Allocation Models to Meet the United States Hospitals Urgent Need of Ventilators During the COVID-19 Pandemic: A Review
Duaa Nawafleh, M.Sc., Alexandr M. Sokolov, Ph.D., and Niamat Ullah Ibne Hossain, Ph.D., Engineering Management Program, Arkansas State University, AR 72467, USA

ID 306      How Good or Bad is the Prediction of Black-Box COVID-19 Models After One Year Has Lapped?
Hennie Husniah, Department of Industrial Engineering, Langlangbuana University, Bandung, 40116, INDONESIA

Asep K. Supriatna, Department of Mathematics, Padjadjaran University, Jatinangor, 45363, INDONESIA

ID 307      Coordination and Non Coordination Lease Contract Model with Availability Target
H. Husniah, Bermawi.P. Iskandar, Department of Industrial Engineering, Langlangbuana University, Bandung, Indonesia

A. Cakravastia, Department of Industrial Engineering, Bandung Institute of Technology, Bandung, Indonesia

ID 310      Traffic Light Status Detection using APV Method 
Moh Noor Al-Azam1, Cahyo Darujati1, Engineering and Computer Science Faculty, Narotama University, Surabaya, Jawa Timur, 60117, Indonesia

Sri Wiwoho Mudjanarko, 2,*Civil Engineering Faculty,  Narotama University, Surabaya, Jawa Timur, 60117, Indonesia

ID 314      Factors that Determine Repeat Purchases on E-Commerce
Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Enggal Sriwardiningsih, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia,

Hendra Alianto, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Sugeng Riyanto, STIE Pertiwi, Bekasi , Indonesia

Destiana Kumala, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia 11480

Rivaldhy N. Muhammad, Study Program of Law, Faculty of Law, Social and Political Sciences, Open University,Indonesia

ID 317      Industry 4.0 Maturity as a Moderator of Industry 4.0’s Impact on Company Financial Performance
Hong Long Chen, Department of Business and Management, National University of Tainan, Tainan, 70005, Taiwan

ID 326      Comparison study between CB-SEM and PLS-SEM for sustainable supply chain innovation model
Ahmed El Maalmi and Laila El Abbadi, Engineering Sciences Laboratory, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco

Kaoutar Jenoui, Laboratory Smartilab, Moroccan School of Engineering Sciences, EMSI, Rabat, Morocco

 

ID 328      Systemic analysis of the electrification of last-mile freight transport
Julieth Stefany García Collazos, Facultad de Minas, Universidad Nacional de Colombia, Medellín, Colombia

Laura Milena Cárdenas, Facultad de Ingeniería, Universidad de Antioquia, Medellín, Colombia

Carlos Jaime Franco, Facultad de Minas, Universidad Nacional de Colombia, Medellín, Colombia

ID 329      Improving SMEs Knowledge with Adoption  Knowledge from Social Media
Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Indra Kusumadi Hartono, Information Systems Department, Bina Nusantara University, Jakarta, Indonesia 11480

Ade Fadli Fachrul, Character Building Development Center, Bina Nusantara University, Jakarta, Indonesia

 

ID 331      The Effectiveness Of Tourism Promotion In Bali By Influencers Using Tiktok
Anak Agung Ayu Dwitha Vebby Nathasya, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

Yanuarita Kusuma Permata Sari, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

ID 334      DIRECT WATER COOLING OF STATOR YOKE OF SRM WITH HIGH FREQUENCY AND CURRENT DENSITY
Bui Minh Dinh, School of Electrical Engineering, Hanoi Unviversity of Science and Technology

ID 335      Distraction and Driving Behavior of Young Indonesian Drivers: An Exploratory Study

Wina D. Oktavia, Manik Mahachandra, Excel Verlieson, Industrial Engineering Department, Faculty of Engineering, Diponegoro University, Semarang, Central Java 50269, Indonesia

Muhammad Ragil Suryoputro, Industrial Engineering Study Program, Faculty of Industrial Technology, Indonesian Islamic University, Yogyakarta, Indonesia

ID 336      Measuring the correlation of service expectations of travelers in selected international KSA airports through Bilingual Sentiment and Clustering Analysis
Eng.Haya Altajel and Dr.Faisal Alotaibi, Industrial Engineering Department, Alfaisal University, Riyadh, Saudi Arabia

ID 337      A QFD-AHP Method for Bridges Structural System Selection During the Conceptual Design Phase
Mohammad AL Ayoub, Department of Civil Engineering, University of Sharjah, Sharjah, UAE

Saleh Abu Dabous, Department of Civil Engineering, University of Sharjah, Sharjah, UAE

Mohammed Alsharqawi, Township of South Stormont, Long Sault, Ontario, Canada

ID 338      How the Use of Unmanned Aerial Vehicles to Detect Lost Energy in Buildings Leads to Industrial Sustainability – A Systematic Review
Sarah Ali A Alshahrani, Industrial Engineering Department, King Khalid University, Abha, Saudi Arabia

ID 346      Communication Strategies of Private University Students in Malang in Adapting to Online Lectures During Pandemic
Yanuarita Kusuma Permata Sari, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

Windaningsih, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta, Indonesia

Cindy Jane Suharjo, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta, Indonesia

ID 347      Analyzing Online Purchase Intentions in Fashion  E-Commerce in Indonesia
Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Enggal  Sriwardiningsih, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia,

Sugeng Riyanto, STIE Pertiwi, Bekasi , Indonesia

Destiana Kumala, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia 11480

Yenny Desnelita, Institut Bisnis dan Teknologi Pelita, Pekanbaru, Indonesia

Maisyarah Rahmi Hasan, Islamic Economic Law Department, Faculty of Sharia, Universitas Islam Negeri Sultan Aji Muhammad Idris Samarinda,

Mahaning Indrawaty Wijaya, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Maryani, Information Systems Department, School of  Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Wilda Susanti, Institut Bisnis dan Teknologi Pelita Indonesia

ID 348      Analysis of the Impact of Capital Structure in the Innovation of a Firm Using the Techniques of Financial Engineering   
Alexandr M. Sokolov, Ph.D., Anish Ghimire, M.B.A., Duaa Nawafleh M.Sc., and Niamat Ullah Ibne Hossain, Ph.D., Engineering Management Program, Arkansas State University, State University, AR 72467, USA

Ashish Ghimire, Department of Finance, Insurance, Real Estate & Law, University of North Texas

 

ID 350      The Effects of Poor Internal Quality on Customer Satisfaction 
Alexandr M. Sokolov, Ph.D., Steven Picklesimon, M.Sc., Duaa Nawafleh, M.Sc. and Niamat Ullah Ibne Hossain, Ph.D., Engineering Management Program, Arkansas State University, State University, AR 72467, USA

ID 354      The Key Factors to improve Thailand’s Logistics System during the COVID-19 period
Teerasak Charoennapharat, Graduate Program in Industrial Engineering, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand

Poti Chaopaisarn, Excellent Center in Logistics and Supply Chain Management, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand

ID 355      Readiness Factors for SMEs in e-Business to Adapt Digital Marketing in Sri Lanka: A Systematic Literature Review
Kaveesha Madurapperuma, Department of Industrial Management, University of Kelaniya, Sri Lanka

Janaka Wijayanayake, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID 356      PINNING-UP OF HOUSEHOLD FINANCIAL BEHAVIOR TO SUPPORT FINANCIAL SYSTEM STABILITY IN INDONESIA (2015-2019)
Nur Azmi Karim, Entrepreneurship Departement, Bussiness School Undergraduate Program Bina Nusantara University Bandung Campus Bandung, Indonesia

ID 357      Knowing the SMEs Strategy Research around the World Using a Bibliometric Approach
Febby Candra Pratama and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

Robertus Tang Herman, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Fairuz Iqbal Maulana, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta 11480, Indonesia

Galuh Windang Nuraulia, Economic Education Department, Universitas Negeri Malang, Malang 65145, Indonesia

ID 358      Leveraging the Application of Forecasting Methods to Analyze the Scrap Data of a Tire Industry
Larissa Guimaraes T. Santanna, Jessica Lee, Drew Wright, Niamat Ullah Ibne Hossain, Ph.D. Mississippi State University, Mississippi State, MS 39762, USA

Alexandr M. Sokolov, Ph.D., Arkansas State University, Engineering Management Program, Arkansas State University, State University, AR 72467, USA

ID 365      Life cycle assessment in the wine industry – a Bibliometric analysis
Adrián Salvador Morales García, Jorge Luis García Alcaraz and Yashar Aryanfar, Department of Electric Engineering and Computers Sciences, Autonomous University of Ciudad Juarez, Ciudad Juárez 32310, Mexico

José Roberto Díaz Reza, Department of Industrial Engineering, Tecnológico Nacional de Mexico/I.T. Ciudad Juárez, Ciudad Juarez 32500, Mexico

Ari Happonen, LUT School of Engineering Science, LUT University, Lappeenranta 53850, Finland

Julio Blanco Fernández, Department of Mechanical Engineering, University of La Rioja, Logroño, 26006, Spain

ID  366        Decent Work and Gender Equality in Mexico
Brenda Esmeralda Moreno-Garduño, Gabriela Guadalupe Escobedo-Guerrero, Georgette del Pilar Pavía-González, Antonio Uribe-Méndez,
Victor Martin Maldonado-Benitez, ESCA Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico

ID 368      Industrial Symbiosis for Responsible Consumption in the Coffee Sector: Literature Review
Arturo Gutiérrez Maya, Gabriela Guadalupe Escobedo Guerrero, ESCA Santo Tomás, Instituto Politécnico Nacional, México City, México

Lila Margarita Bada-Carbajal, Instituto Tecnológico Superior de Álamo Temapache, Tecnológico Nacional de México, Veracruz, México

Antonio Uribe Méndez, ESCA Santo Tomás, Instituto Politécnico Nacional,México City, México

ID 369      Implementation of MSMEs Competitiveness Improvement Model to Strengthen Entrepreneurial Aspects in Malang City
Ajeng Mira Herdina, Riesta Devi Kumalasari, Priska Arindya Purnama and Murniati, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

ID 374      The Analysis on Factors influencing the Use of Mobile Payment System Among Generation Z in Indonesia
Kurnia Fajar Afgani, School of Business and Management, Institut Teknologi Bandung, Indonesia

Octaviani Ratnasari Santoso, Politeknik Pajajaran ICB, Bandung, Indonesia

Dematria Pringgabayu, Politeknik Pajajaran ICB, Bandung, Indonesia

Emilia Fitriana Dewi, School of Business and Management, Institut Teknologi Bandung, Indonesia

Zxavian Zebadia Simorangkir, School of Business and Management, Institut Teknologi Bandung, Indonesia

ID 377      A Hybrid Artificial Neural Network and Logistics Regression Model for Fashion Sales Strategies Prediction
Rifdah Zahabiyah and Andi Cakravastia, Industrial Engineering Program, Faculty of Industrial Technology, Bandung Institute of Technology, Bandung, Indonesia

ID 379      Control and Continuous Improvement in the Picking Area
Marco Antonio Lucero-Flores, Facultad Industrial y Logística. Departamento en Logística y Dirección de la cadena de suministro, Universidad Popular Autónoma del Estado de Puebla A.C., 17 Sur 901, Barrio de Santiago, Puebla, 72410, México

Diana Sánchez-Partida, Facultad Industrial y Logística. Departamento en Logística y Dirección de la cadena de suministro, Universidad Popular Autónoma del Estado de Puebla A.C., 17 Sur 901, Barrio de Santiago, Puebla, 72410, México

Patricia Cano-Olivos, Facultad Industrial y Logística. Departamento en Logística y Dirección de la cadena de suministro, Universidad Popular Autónoma del Estado de Puebla A.C., 17 Sur 901, Barrio de Santiago, Puebla, 72410, México

Luis Cuautle-Gutierrez, Facultad Industrial y Logística. Departamento en Logística y Dirección de la cadena de suministro,  Universidad Popular Autónoma del Estado de Puebla A.C., 17 Sur 901, Barrio de Santiago, Puebla, 72410,

 

ID 381      A Comparative Life Cycle Assessment Study of Conventional and Best Available Techniques Incorporated Cement Production Processes using midpoint approach
Busola Dorcas Olagunju, Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, South Africa

Rubén Irusta-Mata, Institute of Sustainable Processes, University of Valladolid, Dr. Mergelina s/n, 47011 Valladolid, Spain, Department of Chemical Engineering and Environmental Technology, School of Industrial Engineering, Paseo del Cauce, 59, University of Valladolid, 47011 Valladolid, Spain.

ID 389  On the Assessment of Neutral Theory via Applying MaxEnt to the Analysis of Barro Colorado Island Species Abundance Data
Damian Musk, Stanford University Online High School, Palo Alto, CA 94305, USA

ID 391      Economic Statistical Design of np Control Chart for Monitoring Attribute    
Batool Alamassi, Salah Haridy, Mohammad Shamsuzzaman and Hamdi Bashir, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah 27272, UAE

ID 392      Supplier Selection Criteria for E-Commerce  Based Fashion SME’s
Yoan Thresia T and Andi Cakravastia, Industrial Engineering Program, Faculty of Industrial Technology, Bandung Institute of Technology, Bandung, Indonesia

ID 393      Factor Analysis on Consumer Behavior Intention to Use Homecare Application for Veterinarian using Structural Equation Model
Anak Agung Ngurah Perwira Redi and Fredlina Margaret, Department of Industrial Engineering, BINUS Graduate Program – Master of Industrial Engineering, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Reny Nadlifatin, Department of Information System, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia

Adji Candra Kurniawan, Department of Logistics Engineering, Universitas Pertamina, DKI Jakarta, 12220, Indonesia

Anisa Larasati, Business Management Department, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Safarudin Gazali Herawan, Industrial Engineering Department, Faculty of Engineering, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Ketut Budhi Riyanta, PT Medika Nusantara Gumilang (Medi-Call), DKI Jakarta, 11480, Indonesia

ID 394      Digital Transformation in Small Medium Enterprises: Mapping of the Knowledge Base
Febby Candra Pratama and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

Fairuz Iqbal Maulana, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta 11480, Indonesia

Nana Abdul Aziz, Political Science and Public Administration, Bandırma University Turki, Bandirma 10200, Turki

Inggit Kresna Maharsih, Chemical and Materials Engineering, National Central University, Taoyuan City 320317, Taiwan (R.O.C.)

ID 395      Knowing The Facts of SMEs Performance Research in Indonesia Using Bibliometric Approach
Febby Candra Pratama and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

Fairuz Iqbal Maulana, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta 11480, Indonesia

Nana Abdul Aziz, Political Science and Public Administration, Bandırma University Turki, Bandirma 10200, Turki

Inggit Kresna Maharsih, Chemical and Materials Engineering, National Central University, Taoyuan City 320317, Taiwan (R.O.C.)

ID 397      The Stakeholders’ Perceptions on Critical Success Factors for Construction Projects
Gomolemo Lovell Phetlhu, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, Gauteng

Dr. Hannelie Nel, Faculty of Engineering and the Built Environment, Senior Lecturer, University of Johannesburg, Johannesburg, Gauteng

ID 398      Product Quality, Price, Product Involvement, Atmosphere and WOM Effect on Purchase Intention at Starbucks Coffee Hayam Wuruk Drivethru Jakarta, Indonesia
Steven Phan and John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Wilson Rajagukguk, Department of Management Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta, Indonesia

ID 400      Critical Success factors of adopting Social Media for Internal Communication in Private Sector Organizations in Sri Lanka
Udeshinie Wijesinghe, Janaka Wijayanayake, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID 403      Detection of Mental illness using Machine learning and Deep Learning
Manan Hingorani, M.Tech Student, Dr. Vishwanath Karad MIT World Peace University, Pune, India

Dr. Nitin Pise, Faculty, MIT WPU Dr. Vishwanath Karad MIT World Peace University, Pune, India

ID 406      Identification of External Risks Affecting the South African Mining Sector and Their Mitigation Strategies              

Moshopyadi Pretty Mashamba and Hannelie Nel, Post-Graduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 408      Analysing the Potential of Technology in Sri Lanka to Adopt E- voting : A Systematic Literature Review
Saraniya Selvanesan, Department of Industrial Management, University of Kelaniya, Sri Lanka

Janaka Wijayanayake, Department of Industrial Management, University of Kelaniya, Sri Lanka

ID 410      The Cultural Dimension of Entrepreneurial Leaders in Sundanese Society
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Hazmilah Hasan, Faculty of Technology Management and Technopreneurship, Universiti Teknikal Malaysia Melaka

Andreas Chang, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

ID 411      Investigation of the Effectiveness of ERP System on Management Decision-Making in Higher Educational Institutions
George K. Aggrey, Department of Computer Science and Information Technology, University of Cape Coast, Ghana

Amevi Acakpovi , Department of Electrical and Electronic Engineering, Accra Technical University (ATU), Ghana

Emmanuel Peters, Department of Computer Science and Information Technology, Accra Institute of Technology (AIT), Ghana

ID 412      ERP Implementation Challenges in Ghanaian Higher Education Institution
George K. Aggrey, Department of Computer Science and Information Technology, University of Cape Coast, Ghana

Amevi Acakpovi, Department of Electrical and Electronic Engineering, Accra Technical University (ATU), Ghana

Emmanuel Peters, Department of Computer Science and Information Technology, Accra Institute of Technology (AIT), Ghana

ID 413      Collaborative model between Data Analytics and PDCA for service level improvement in environmental consulting SMEs
Juan Carlos Quiroz-Flores and Martín Collao-Diaz, Faculty of Engineering and Architecture, Industrial Engineering Program, Universidad de Lima, Perú

ID 414      A Collaborative IoT Design Approach
Maxwell Schoeman and Marné de Vries, Department of Industrial Engineering, University of Pretoria, South Africa

ID 415      The Impact of Destination Attribute to Traveling Decision in New Normal
Erma Lusia, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Mulyani, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Doni Purnama Alamsyah, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

ID 416      Supply chain inventory optimization: An alternative approach
Nguyen Thi Mong Ngan, School of Manufacturing Systems and Mechanical Engineering, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani, Thailand

Jirachai Buddhakulsomsiri, School of Manufacturing Systems and Mechanical Engineering, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani, Thailand

Pham Duc Tai, School of Manufacturing Systems and Mechanical Engineering, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani, Thailand

ID 419      Dimensionality Reduction and Text Mining for Smart Content Filtering of an Online Health Forum
Reinaldo Sanchez-Arias, Roberto Batista, Levi C. Nicklas, Department of Data Science and Business Analytics, Florida Polytechnic University, Lakeland, FL 33805, USA

Peter Akioyamen, The School of Mathematical and Statistical Sciences, Western University, Ontario, Canada

ID 421      The Effect Of Digital Marketing And Brand Trust On The Decision To Use Digital Wallet Funds In Bandung City Community
Jalil Nur Rahman, M. Yahya Arwiyah, Amalina Dewi Kumalasari, and Mahir Pradana Department of Business Administration, Telkom University, Bandung, 40257, Indonesia

Renaldi Renaldi, Universitas Andi Djemma, Palopo, Indonesia

 

ID 423      Influence of the Rotor Slot Number on Core Losses of the Induction Motor  
Bui Minh Dinh, School of Electrical Engineering and Electronics, Hanoi University of Science and Technology

Nguyen Viet Anh, Hanoi University of Industry

ID 425      Modeling and Algorithm Design for Driver Assignment Problems Considering Drivers States and Capacity
Rizki Basuki, Rully Cahyono, Andi Cakravastia, Department of Industrial Engineering, Institut Teknologi Bandung, Bandung 4013, INDONESIA

ID 426 Malangan Mask Preservation Based on Social Media Consumption of Generation Z in Malang
Erika Danny Mulyadi, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

Yanuarita Kusuma Permata Sari, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

ID 427      The Influence of Communication Psychology on the Character of Jasalindo Sport Swimming Athletes
AA. Mirah Krisnawati, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

Nur Kholis, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

Yosephine Aurelia Purnomo, Communication Science Department, Faculty of Economics and Communication, Bina Nusantara University, Jakarta 11480, Indonesia

ID 428      Preparation and characteristics of synthesized hydroxyapatite from bovine bones and by co-precipitation method
Saida Bouyegh, Samira Tlili, Kotbia Labiod and Mohamed Hassani, Research Center in Industrial Technologies CRTI , P.O. Box 64, Cheraga 16014 Algiers, Algeria

Mohamed Grimet and Oussama Bensalem,Chemistry Department, Badji Mokhtar -Annaba University

ID 429      Academic Performance, Fatigue, and Stress in  Online Learning Among College Students:  A Multivariate Analysis
John Jeric R. Almonte, Emil R. Badillo, Kevin Brian S. Candelaria, Ian Kent D. Tadle, John Timothy P. Villacorte, Romalyn Galingan, Department of Industrial Engineering, College of Engineering and Architecture Technological Institute of the Philippines – Quezon City Cubao, Quezon City, Philippines

ID 430      Robust Least Squared Model: How to Maintain Brand Loyalty at Starbucks Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

ID 431      Robust Least Squared: To Build Consumer’s Purchase Intention at Louis Vuitton Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Wilson Rajagukguk, Faculty of Economics and Business, Universitas Kristen Indonesia, Jl. Mayjen Sutojo No.2, Cawang, Jakarta 13630, Indonesia

ID 432      Human Resource 4.0: A vision of a technological tool to assess and foster employee engagement
Juliana Salvadorinho, Carlos Ferreira, Leonor Teixeira, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT)
Institute of Electronics and Informatics Engineering of Aveiro (IEETA),University of Aveiro, Aveiro, Portugal

Andreia Vitória, and Celeste Varum, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT),
Research unit in Governance, Competitiveness and Public Policies (GOVCOPP)

João Marques, Research unit in Governance, Competitiveness and Public Policies (GOVCOPP),
Department of Social, Political and Territorial Sciences (DSPTS)

ID 433 Factors Bridging the Satisfaction of Generational Gap in Philippine Healthcare System Telemedicine Use
Charish Jen Rala, Jovilyn Abarico, Obeaya Marie Camota, Andrea Cumpa, Dianne Lizbeth Perico, Kenneth Salvante, Pamela Anne Mae Velasco, Romalyn Galingan, Arriane Palisoc, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines

ID 434      Factors Influencing The Diffusion of Telehealth In Home Visit Medical Services
Adji Candra Kurniawan, Fiki Rohmatul Maula, Koulan Tsakiilaa, Department of Logistics Engineering, Universitas Pertamina, DKI Jakarta, 12220, Indonesia

Anak Agung Ngurah Perwira Redi, Department of Industrial Engineering, BINUS Graduate Program – Master of Industrial Engineering, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Bobby Ardiansyahmiraja, Department of Technology Management, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia

Reny Nadlifatin, Department of Information System, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia

Anisa Larasati, Business Management Department, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Safarudin Gazali Herawan, Industrial Engineering Department, Faculty of Engineering, Universitas Bina Nusantara, DKI Jakarta, 11480, Indonesia

Ketut Budhi Riyanta, PT Medika Nusantara Gumilang (Medi-Call), DKI Jakarta, 11480, Indonesia

ID 435      Proposal for the Implementation of Key Performance Indicators for a Warehouse. Case: Tracto Partes Diamante de Puebla S.A. de C.V
Maria Fernanda Barreto-Maceda, Diana Sánchez-Partida, Santiago Omar Caballero-Morales and Luis Cuatle-Gutierrez, Faculty of Industrial Engineering and Logistics, Department in Logistics and Supply Chain Management, UPAEP University, 17 Sur 901, Barrio de Santiago, CP 72410 Puebla, México

 

 

ID 438      Redesigning an Inclusive Digital Contact Tracing Service Systems: User-Focused Phase of Design Thinking Approach
Javy Denver K. Chan, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Ivan Floyd R. Flores, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Wilwyn G. Mendoza, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Kim Lyn B. Sanvodal, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Gabriel C. Bucu, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, Philippines and Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines

ID 439      Queuing Theory: A Case Study in Analyzing the Vaccination Service in Quezon City
Christlyn Mae C. Valeriano, Charles Kristian K. Ilo, Maria Kathryne A. Illescas, Jan Aldrin V. Dahilig, Rene D. Estember, School of Industrial and Engineering Management, Mapúa University, Intramuros, Manila, Philippines

ID 440      Experimental Analysis on Determination of Significant Factors in Growing Mung Bean Sprouts (Length) in a Home-Based Set Up (Non-Soil Germination)
Ariel A. Salvador Jr. and Gabriel C. Bucu, Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines
Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Joehanna K. Ngo and Carlos Ignacio Jr. P., Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

ID 441      Brand Trust, Price, Perceived Value and Brand Image as Mediation toward Purchase Intention of Aircraft Tickets in Traveloka in the era of Pandemic Covid-19
E-Joo and John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, Indonesia

Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

 

ID 443      Application of Decision Theory on Strategy of Supermarket in Promoting Health Safety and Developing Sustainability amidst Pandemic
Angelo Luis S. Doctora, William Davin D. Perez, Franco Neil A. Sanchez, Abigail B. Vasquez, Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 444      Markov Chain Analysis of Student Learning Progression  in a Quarter Academic System
Jhon Lawrence G. Quimio, Anthony A. Sanchez, Kianna Denise C. Villapando, Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 445      Supply Chain Risk Mitigation with Supply Risk Management approach
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK

Adhi Nugroho Chandra, Henricus Bambang Triantono, Seprihadi Natanael, Lisa E. Wong, School of Information systems, Bina Nusantara University, Jakarta, Indonesia

ID 446      Effectiveness Of Gamification Strategy To Increasing Shopee’s Customer Loyalty In Shopee’s Marketing Public Relations
Benedictus Dicky I., Public Relations Department, Faculty of Economics & Communication Bina Nusantara University Jakarta, Indonesia 11480

Gabriella Sagita Putri, Public Relations Department, Faculty of Economics & Communication Bina Nusantara University Jakarta, Indonesia 11480

Galuh Ayu Savitri, Public Relations Department, Faculty of Economics & Communication Bina Nusantara University Jakarta, Indonesia 11480

Adhi Murti Citra Amalia, Public Relations Department, Faculty of Economics & Communication Bina Nusantara University Jakarta, Indonesia 11480

ID 447      Managing Risk with the Concept of SCRM on Procurement and Warehouse Department
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK 

Andreas AB. Hirawan, Angelia D. Suryawan, Arief Dwi Hartadi, Fenny, School of Information systems, Bina Nusantara University, Jakarta, Indonesia

ID 448      Risk Mitigation for Strengthening Supply Chain Strategies in the Pandemic Era
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK 

Stephen G. Kurnia, Dian Affandi, Haris Setia Budi, Maria Gabby, School of Information systems, Bina Nusantara University
Jakarta, Indonesia

ID 449      Preventive Maintenance on Main Components of PT KA Indonesia Transportation Equipment
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK

Harkat C Zamasi, Hendy Wijaya, Ernawaty, Lius Steven, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

ID 450      Goal Programming Approach: Application in a Cake Business
Lorenzo Caday, Krisanta Ana Draculan, Jerome Liwanag, Wajid Mariño, Rene Estember, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 451      Preventive Maintenance Modeling on Die Casting Machines with Information Systems
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK

Yulia Magdalena, Witarsjah, Yunita Kartika Sari, Satya Windy, School of Information systems, Bina Nusantara University, Jakarta, Indonesia

ID 452      The Application of Decision Theory in Picking Delivery Courier Services in the Philippines
Alliah Jane S. Agunos, Carl Louie N. Cruz, Cedric F. Reprado, Henrie Louis P. Subido, Rene D. Estember, Department of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines 

ID 453      The Influence of Mobile Experience Design on Brand Satisfaction
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK 

Lianna Sugandi, Huibert A Wena, Theodora Subyantoro, Lisa Dewi, School of Information systems, Bina Nusantara University Jakarta, Indonesia

ID 454      Optimizing Raw Material Orders Using a Comparison of Deterministic and Probabilistic Methods
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarta, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK 

Fifilia, J Rolles Sihombing, Mahendra Metta, Manise Hendrawaty, School of Information systems, Bina Nusantara University, Jakarta, Indonesia

ID  455     Using E-Procurement to Minimize Risks in Customer Service
Tri Pujadi, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

Bahtiar H. Simamora, Department of Management, Binus Business School, Bina Nusantara University  Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK

Siti Maryam, Rainer Hannesto, Steeve Haryanto, Mahaning Indrawaty, School of Information systems, Bina Nusantara University, Jakarat, Indonesia

ID 456      A Queuing Theory Approach to Improve Service Quality of Banking Systems: A Case Study of a Bank in Laguna, Philippines
Madeline Anne Patrice C. Sy, Frankern Luis S. Malabuyoc, Ma. Daniella M. Sobrevilla, and Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Intramuros, Manila, Philippines

 

ID 458      An Application of Decision Analysis on the Strategy of Professors with the Absorption of Knowledge Between Face-to-Face and Online Learning 
Julianne Mikhaella Delos Reyes, Louis Miguel Dural, Julia Sofie Mangaoang, Gaea Marithe Victor, and Rene Estember, School of Industrial Engineering and Engineering management, Mapua University, Muralla St. Intramuros, Manila 1002 Philippines

ID 459      An Adaptation of Industry 4.0: Modifying the Implemented Queuing System in Philippine Statistics Authority Applying Monte Carlo Simulation
Matthew P. Solivio, Maria Angelica D. Bare, Francee Mae F. Castro, Kirstien Paola E. Robas, Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 460      A Guideline to Improve the Business Continuity in the New Normal (Covid-19) through Human Resource Management: Case of Sri Lankan Apparel Industry
Gowsiga Mahendrarajah, Department of Building Economics, University of Moratuwa, Moratuwa, Sri Lanka

Sabrina Nazeer, Department of Building Economics, University of Moratuwa, Moratuwa, Sri Lanka.

Kartheepan Thavarasasingam, University of Western London

ID 461      Building a Two-Decade Traditional Retail Strategy Research Theme Map Using a Bibliometric Approach e 
Febby Candra Pratama, Hera Rachmahani, Mardhatillah Shanti, Riesta Devi Kumalasari, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

ID 462 The Applications of Game Theory in Processing the Orders of Company OL-A and Company OL-B
Deceree Anne A. Haboy, Daniel John B. Sacramento, Ervin Josh P. Santos, Christine Angelie Y. Taw, Rene D. Estember, Department of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 463      Product Launch Decision Making for Non-preemptive Product Development Process
Adewole Mark Adegbola, Venkat Allada, Engineering Management and Systems Engineering Department, Missouri University of Science and Technology, Rolla, MO 65401, USA

ID 464      Application of Dynamic Programming to Sweet Delights: A Market Research for Online Baked Products
James Brylle C. Foz, Martin James D. Olan, Daniel N. Perez, Christian Jay E. Sesnorio, Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 465      The Internet of Things start-up business model for smartization of urban transportation serving Base of the Pyramid consumers
Mohammad Jahanbakht, Department of Industrial, Manufacturing, and Systems Engineering, The University of Texas at Arlington, Arlington TX 76019, USA

Mohammad Tondro, Management of Technology and Entrepreneurship Department, Allameh Tabataba’i University, Tehran, Iran

Department of Industrial, Manufacturing, and Systems Engineering, The University of Texas at Arlington, Arlington TX 76019

ID 466      Investigating the Applicability of 4IR technologies in the Foundry Industry – A South African case
Yvonie N. Mawane and Robert P. Mutyavavire, Department of Mechanical and industrial Engineering, University of Johannesburg, South Africa

ID 467      Small-scale Manufacturing of Aluminium & Steel Products Inclusion in the Mainstream Economy
Amogelang Bogadi Sabrina Setshedi and Michael Sizwe Mkwanazi, Faculty of Engineering and the Built Environment, University of Johannesburg, Cnr Kingsway Avenue & University Road, Auckland Park, South Africa

Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, Cnr Kingsway Avenue & University Road, Auckland Park, South Africa

ID 470      Energy Saving in a Tobacco Curing Stove with the Use of Heat Recovery and Solar Energy
Miguel Condorí,  Federico Albesa, Ileana Cruz, Instituto de Investigaciones en Energía no Convencional (INENCO), Universidad Nacional de Salta (UNSa), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Av. Bolivia 5150, A4408FVY, Salta, Argentina

ID 472      Novel In-Situ Aircraft Oxygen Cylinder Refilling Tool
Allan D. Lang, BEng., Systems Engineers Oxygen Design Office, Airbus Americas Engineering, Inc., Mobile, Alabama, 36615, USA

Robert Thompson, Head of Flight Test Systems Engineering Support, Airbus North Americas Final Assembly Line, Mobile, Alabama, 36615, USA

ID 473      Relationship Between Lean Manufacturing and Sustainability – A Bibliometric Analysis
Luis Javier Márquez Figueroa, Jorge Luis García Alcaraz, Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez

Jesús Alfonso Gil López, Departamento de Economía y Empresa, Universidad de La Rioja

Efrén Romero Riaño, Director de Bibliometría, Observatorio Colombiano de Ciencia y Tecnología

 

ID 476      Inventory Modeling for Automotive Spare Parts with Probabilistic Demand by Considering an Integrated Cost and Filling Rate
Wirawan Agung Nugroho, Mohammad Mi’radj Isnaini, Abdul Hakim Halim, Industrial Engineering Department, Institut Teknologi Bandung, Bandung 40132, Indonesia

ID 477      Development of a Dashboard to Improve Fleet Maintenance for a Food Bank
La’Tricha Parks, Steven Jiang and Lauren Davis, Department of Industrial and Systems Engineering, North Carolina A&T State University, Greensboro, NC 27411, USA

ID 478      ECONOMICS OF SMALL-SCALE POWER GENERATION FROM RENEWABLE AND HYBRID SOURCES
Mohd Faiz Che Wahab, Md Mizanur Rahman, Aminuddin Saat, Hasan Mohd Faizal and Mazlan Abdul Wahid, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, Malaysia

ID 479      Digital Twin for Urban Spaces: an Application
Diego M. Botín-Sanabria, Jorge G. Lozoya-Reyes, Roberto C. Vargas-Maldonado, Karen L. Rodríguez-Hernández, Ricardo A. Ramírez-Mendoza, Mauricio A. Ramírez-Moreno, Jorge de J. Lozoya-Santos, School of Engineering and Science, Mechatronics Engineering Department, Tecnológico de Monterrey, Campus Monterrey Eugenio Garza Sada 2501 Sur, Monterrey, México

ID 480      Modelling and Mapping University Business Process level 2
Bachtiar H. Simamora, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Wibowo Kosasih, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Natalia, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Rudi, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Lily Leonita, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 481      GMove: Gyroscopic Controlled Robotic Movement
Raymond Yap, Valley Christian High School, 100 Skyway Drive, San Jose, CA, USA

 

ID 483      Use of Technology for Better Understanding of Cities
Karen L. Rodríguez-Hernández, Ana L. Gaxiola-Beltrán, Jorge Narezo-Balzaretti, Mauricio A. Ramírez-Moreno, Ricardo A. Ramírez-Mendoza, Jorge de J. Lozoya-Santos, School of Engineering and Sciences, Tecnologico de Monterrey, Campus Monterrey, Eugenio Garza Sada 2501 Sur, Monterrey, Mexico

ID 484      Energy efficiency analysis of the electric traction systems with simple traction drive and in-wheel motor
Sebastián Fernández Herrera, School of Automotive Mechanics, University of Azuay, Cuenca, Ecuador

Efrén Fernández Palomeque, School of Automotive Mechanics, University of Azuay, Cuenca, Ecuador

ID 485      Detection of Engineering Interest in Children Through an Intelligent System Using Biometric Signals
Gustavo Olivas Martínez, Milton Osiel Candela Leal, Juan Carlos Ocampo Alvarado, Luis Fernando Acosta Soto, Diego Mauricio Botín Sanabria, Gladys Guadalupe Díaz Armas, Aimé Judith Aguilar Herrera, Esther Aimeé Delgado Jiménez, Myriam Alanis Espinosa,
Mauricio Adolfo Ramírez Moreno, Rubén Morales Menéndez, Ricardo Ambrocio Ramírez Mendoza, Jorge de Jesús Lozoya Santos, School of Engineering and Sciences, Tecnológico de Monterrey, Monterrey, Nuevo León, México

Jorge Murrieta González, Aleyka García Briseño, MachineCare Education, Monterrey, Nuevo León, México

ID 486      The Bullwhip Effect in the Northern States of Mexico: an Econometric and Sustainable Analysis in the Transport and Logistics Sector
Fabricio Moreno-Baca, Patricia Cano-Olivos, Industrial & Logistics Faculty, Universidad Popular Autónoma del Estado de Puebla,17 Sur 901, Barrio de Santiago, 72410, Puebla, Mexico

ID 487      Real-time Biofeedback System for Interactive Learning using Wearables and IoT
Milton O. Candela-Leal, Juan M. García-Briones, Gustavo Olivas-Martínez, Rafael Abrego-Ramos, Gabriela J. Álvarez-Espinoza, Diego M. Botín-Sanabria, Karen L.Rodríguez-Hernández, José F. Pachego-Quintana, Sofía Sampogna-Montemayor, Ruben Morales-Menendez, Ricardo A. Ramírez-Mendoza, Mauricio A. Ramírez-Moreno, Jorge de J. Lozoya-Santos, School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey, NL 64849, Mexico

Juan C. Tudón-Martínez., School of Engineering and Technologies, Universidad de Monterrey, San Pedro Garza García, NL 66238, Mexico

ID 488      Digital Twin for a Vehicle: ElectroBus Case Study
Diego M. Botín-Sanabria, Diego A. Santiesteban-Pozas, Guillermo Sáenz-González, Ricardo A. Ramírez-Mendoza, Mauricio A. Ramírez-Moreno, Jorge de J. Lozoya-Santos, School of Engineering and Science, Mechatronics Engineering Department, Tecnológico de Monterrey, Campus Monterrey, Eugenio Garza Sada 2501 Sur, Monterrey, Mexico

ID 489      Conscious Mobility for Urban Spaces Application
Jorge G. Lozoya-Reyes, Roberto C. Vargas-Maldonado, Mauricio A. Ramírez-Moreno, Jorge de J. Lozoya-Santos, Vianney Lara-Prieto, Maria I. Ruiz-Cantisani, Jorge NarezoBalzaretti, Gabriel J. Leal-Cantu, Guadalupe Lara-Sanchez, Vanessa Ontiveros-Yanes, Dalia L. Hurtado-Gonzalez, Jose M. Aguilar-Zamudio, Daniela I. Balderas-Aldape, Alejandro Sanchez-Gomez, Jose A. Galvan-Galvan, School of Engineering and Sciences, Mechatronics Engineering Department, Tecnologico de Monterrey, Campus Monterrey, Eugenio Garza Sada 2501 Sur, Monterrey, Mexico

ID 492      Facial Recognition System for Access Control through the Application of Convolutional Neural Networks
Edison Vasquez and Monica Karel Huerta, Grupo de Telecomunicaciones GITEL, Universidad Politecnica Salesiana, Cuenca, Ecuador

Roger Clotet Martinez, Astronomy, Big Data and Computing Science (ABACO), Valencian International University (VIU), Valencia, Spain

José-Ignacio Castillo-Velázquez, ADVNETLAB, Telecommunications Engineering Department, Autonomous University of Mexico City, Mexico City, Mexico

 

ID 494      Performance Comparison for File Transfers for Four Advanced Networks in GNS3 under IPv6
Jose-Ignacio Castillo-Velázquez, ADVNETLAB, Telecommunications Engineerig Department, Autonomous University of Mexico City, Mexico City, México

Monica Karel Huerta, Grupo de Telecomunicaciones GITEL, Universidad Politecnica Salesiana, Cuenca, Ecuador

 

ID 496      Microgrid Supplier Selection Problem Considering Euclidean Distance and Ideal Vector System
Trinidad Reyes and Jose F. Espiritu, Industrial Manufacturing and System Engineering Department, The University of Texas at El Pas, El Paso, TX 79968, USA

ID 497      Service Quality Assessment of Local Government Units’ COVID Pandemic Response using Factor Analysis
Gabriel C. Bucu, Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines and Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Ariel A. Salvador Jr., Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines
Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Joehanna K. Ngo, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Carlos Ignacio Jr. P. Lugay, Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

ID 510      Impact of the Country-of-Origin Image on the Purchase Intention of Foreign Products in Mexican Consumers During the COVID-19 Pandemic
Alexis Jazmín Morán-Huertas, Facultad de Contaduría Pública y Administración, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, Nuevo León, México

ID 515      Efficient Cumulative Sum Chart for Monitoring Fraction Nonconforming
Fathy Alkhatiba, Salah Haridyb, Mohammad Shamsuzzamanc, Imad Alsyoufd, Department of Industrial Engineering and Engineering Management University of Sharjah Sharjah, UAE

Ahmed Maged, Deapartment of Systems Engineering and Engineering Magamanent, University of Hong Kong Kowloon, Hong Kong, China

ID 519     Investigation of Simple Moving Average: Pre-COVID-19 Evidence from the Tokyo Stock Exchange

Wisnu Panggah Setiyono, Department of Management, Faculty of Business, Law and Social Science, Universitas Muhammadiyah Sidoarjo, Sidoarjo, East Java 61215, Indonesia

Liau Zheng Pin, Kinematic Business Management Sdn Bhd, Puchong Gateway, 47110 Puchong, Selangor, Malaysia

Tsabita Karima, Department of Digitally Business, Faculty of Business, Law and Social Science, Universitas Muhammadiyah Sidoarjo, Sidoarjo, East Java 61215, Indonesia

ID 521      An aggregated time series forecasting model for the healthand wellness sector: case of a Brazilian retail company
Carlos Ernani Fries and Vitor Rodrigues, Department of Production and Systems Engineering, Federal University of Santa Catarina, Florianópolis, SC, Brazil

ID 522      Financing Small-Scale Manufacturing in South Africa – The Egg and Chicken Problem
Sizwe Mkwanazi, Department of Business Management, University of Johannesburg, Cnr Kingsway & University Road, Auckland Park, South Africa

ID 523      Monitoring Multi-Attribute Characteristics using a Combined Scheme of np and EWMA Charts
Farah Alyassi, Salah Haridy, Mohammad Shamsuzzaman, Imad Alsyouf, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah 27272, United Arab Emirates

ID 541      Decision Support System Application with Simple Additive Weighting
Cucu Ika Agustyaningrum, Department of Engineering & Informatics, Universitas Bina Sarana Informatika, Bandung, Indonesia 40291

Doni Purnama Alamsyah, Leni Susanti, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Yudi Ramdhani, Rizki Tri Prasetio, Computer Science Program, Universitas Adhirajasa Reswara Sanjaya, Bandung, Indonesia 40291

ID 542      Decision Support System of Food and Beverage Franchise Business
Yudi Ramdhani, Rizki Tri Prasetio, Teguh Wahyu Nugroho, Computer Science Program, Universitas Adhirajasa Reswara Sanjaya, Bandung, Indonesia 40291

Doni Purnama Alamsyah, Leni Susanti, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 543      The Evaluation of Acceptance Samsung Smart Switch Application as Data Sharing Media Using UTAUT
Rizki Tri Prasetio, Yudi Ramdhani, Computer Science Program, Universitas Adhirajasa Reswara Sanjaya, Bandung, Indonesia 40291

Doni Purnama Alamsyah, Kurniadi, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 544      Comparation of SVM Algorithm and Neural Network with Feature Optimization Based on Genetic Algorithm in Determining Immunotherapy Success in Cancer Disease
Yudi Ramdhani, Rizki Tri Prasetio, Ryan Hidayat, Computer Science Program, Universitas Adhirajasa Reswara Sanjaya, Bandung, Indonesia

Doni Purnama Alamsyah, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

 

ID 546      Jidoka enhances unilateral e-marketing and predicts e-stock although uncertainty modus operandi case
Ahmed M. Abed, Dept. of Industrial Engineering, Zagazig University, Egypt

Tamer S. Gaafar, Dept. of computer and System Engineering, Zagazig University, Egypt

ID 548      An Understanding of the Food Chain System in Malaysia: A Mini-Review Approach
Siti Aishah Mohd Zakuan, Latifah Abdul Ghani, Zikri Muhammad, Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 549      Recyclable Materials Flows in Municipal Solid Waste System in Terengganu: An Application of Material Flow Analysis
Fatin Alias, Latifah Abdul Ghani, Rahaya Md Jamin, Siti Aisyah Saat, Zikri Muhammad, Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Nora’aini Ali, Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Kuala Nerus 21030, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 550      Social Impact of Small Seawater Desalination Plant of Local Community: A Social Life Cycle Assessment
Ilyanni Syazira Nazaran, Latifah Abdul Ghani, Zikri Muhammad, Jumadil Saputra, Faculty of Business, Economic and Social Development, Universiti Malaysia Terengganu, 21030, Kuala Nerus, Terengganu, Malaysia

Nora’aini Ali, Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Kuala Nerus 21030, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 554      Development of a Mechatronics System for Measuring Soil pH and approximating NPK Value
Saheed Akande and Mgbeze Emmanuel Chukwuweike, Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado-Ekiti, Nigeria

Saka Saheed Olaoluwa, National Biotechnology Development Agency, Ilesha, Osun State, Nigeria

ID 555      Exploration of Medicinal Plants in Pamekasan District: Ethnobotany Study in Herbal Medicine to Prevent Symptoms of Tuberculosis Infection
Khoirin Maghfiroh, Department of Biology, Faculty of Mathematics and Natural Sciences, Brawijaya University, Department of Food Science and Technology, Faculty of Agriculture, Yudharta University

Jati Batoro, Sri Widyarti and Sutiman Bambang Sumitro, Department of Biology, Faculty of Mathematics and Natural Sciences, Brawijaya University

ID 556  Analysis of Risk Based Capital and EWS as Early Warning of Risk Factors in Sharia Life Insurance in Indonesia
Firly Irhamni and Denis Fidhita Karya, Department of Management, Faculty of Economic and Business, Universitas Nahdlatul Ulama Surabaya, Surabaya Indonesia

ID 557      Econometric Panel Analysis of Transportation Sub Sector companies: Firm-specific factors Approach
Firly Irhamni, Ulfiyah Mazidatun Ni’mah, Riyan S. Putra, Department of Management, Universitas Nahdlatul Ulama, Surabaya, Indonesia

ID 558      Macroeconomic Determinants of NAV (Composite Stock Price Index as Variable Z)
Firly Irhamni S.I.P., M.M and Vina Safiyyah S.M., Department of Management, Faculty of Economics and Business, Universitas Nahdlatul Ulama, Surabaya, Indonesia

ID 565      Spiritual Leadership and Employee Performance: The Mediating Role of Employee Engagement
Muadi Heryawan, Joko Suyono, Nurul Aini, Narotama University, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, STIE Mahardhika Surabaya, Surabaya, Indonesia

Sukaris, University of Muhammadiyah Gresik

ID 566      Tax Relaxation During the Covid -19 Pandemic Against Individual Taxpayer Compliance in SPT Reporting at the Pondok Aren Tax Service Office, South Tangerang City
Ambarwati and Indra Sumarna Sobari and Rudi Kristanto, Institut Ilmu Sosial dan Manajemen STIAMI, Jakarta, Indonesia

Agus Sunarya Sulaeman and Muhammad Heru Akhmadi, Politeknik Keuangan Negara STAN, Jakarta, Indonesia

ID 567      The Effect of Intelligence Quotient and Emotional Quotient on Lecturer Performance Mediated by Creativity
Hery Winoto Tj, Melitina Tecoalu, Fredella Colline, Daniel Widjaja and Roseline Mannuela, Center of Innovation in Applied Management and Behavioral Economy (CIAMBE), Faculty of Economics and Business, Krida Wacana Christian University

ID 568      The Mediating Role of Dividend Policy in Relationship Between Profitability and Firm Size on Firm Value
Ivan Wijaya, Nurul Aini, Joko Suyono, Zetayu Vinata Meriel, Narotama University

Damarsari Ratnasahara Elisabeth STIE Mahardhika Surabaya, Indonesia

ID 569      The Mediating Role of Job Satisfaction in Relationship Between Organizational Commitment and Employee Performance
Abdul Hamid, Hermien Tridayanti, Hendry Eka Prastiya, Tri Utoyo, Joko Suyono, Narotama University, Surabaya, Indonesia

ID 570      The Mediating Role of Knowledge Sharing in Relationship Between IT Application Usage and End-User Focus on Employee Performance
Hendry Eka Prastiya, Hermien Tridayanti, Abdul Hamid, Nasyik Ifadah, Joko Suyono, Narotama University, Surabaya, Indonesia

ID 571      Work Loyalty and Employee Performance: The Mediating Role of Organizational Commitment
Nasyik Ifadah, Arasy Alimudin, Tri Utoyo, Joko Suyono, Narotama University, Surabaya, Indonesia

Subas, Sekolah Tinggi Agama Islam Al Fithrah, Surabaya, Indonesia

ID 572      Transformational Leadership and Turnover Intention: The Mediating Role of Job Satisfaction
Zetayu Vinata Meriel, Joko Suyono, Erwin Pramastya Sabatini, Ivan Wijaya, Narotama University, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, STIE Mahardhika Surabaya, Surabaya, Indonesia

 

 

ID 577      Analysis of Risk Based Capital and EWS as Early Warning of Risk Factors in Sharia Life Insurance Companies and Sharia Life Insurance Units in Indonesia
Firly Irhamni and Denis Fidhita K., Department of Management, Faculty of Economic Business and Technology Digital, Universitas Nahdlatul Ulama Surabaya, Surabaya Indonesia

ID 583      The Influence Of Conference Class Technology Using Zoom On E-learning In The Covid-19 Pandemic

Albert Riyandi, STMIK Nusa Mandiri 1
, Bambang Wijonarko, Universitas Bina Sarana Informatika
Aji Sudibyo, Universitas Bina Sarana Informatika
Imron Imron4, M. Sinta Nurhayati5, ,  2,3, Jl. Jati Waringin no 2 Jakarta Indonesia1, Jl. Kramat 98 Jakarta Indonesia2,3

ID 585      Analysis of Green Supply Chain Management Practices in Automotive Industry Based on Green SCOR MODEL
TRONNEBATI Imane and JAWAB Fouad, Technologies and Industrial Services Laboratory, Higher school of technology, Sidi Mohamed Ben Abdellah University, Fez – Morocco

ID 586      Analysis of Relative Lateral Drift between Adjacent Floors of the High-Rise Building Structure without and with Seismic Base Isolations
Fakhry Ajie Hidayat, Graduated from the Civil Engineering Master Program, Trisakti University, Indonesia

Agus Hadi Santosa Wargadipura, Senior Lecturer in the Civil Engineering Master Program, Trisakti University, Indonesia

ID 587      Identification Dominant Factors of Infrastructure Development in Tourist Natural Reserves
Darmawan Pontan, Ryan Faza Prasetyo, Reky Prayogo, Wishnu Arindra Pranoto, Civil Engineering Department, Universitas Trisakti, Jakarta, 11440, Indonesia

ID 588      Identification of Dominant Factors Affecting the Successful Development of Highway Construction Projects
Darmawan Pontan, Ryan Faza Prasetyo, Tomi Adenugroho, Adhiriswa Nur Idatama, Civil Engineering Department, Universitas Trisakti, Jakarta, 11440, Indonesia

ID 589      Control Of Rebar Waste Rate Using Building Information Modelling : A Case Study Of Suspended Road Structure
Ryan Faza Prasetyo and Darmawan Pontan, Universitas Trisakti, Jl. Kyai Tapa No.1, Jakarta Barat, DKI Jakarta, Indonesia

ID 590      The Determinants of Electronic Medical Record Satisfaction: Communication Styles, Computer Efficacy and Competency
Erwin Pramastya Sabatini, Reswanda, Joko Suyono, Narotama University, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, STIE Mahardhika Surabaya, Surabaya, Indonesia

Sukaris, University of Muhammadiyah Gresik

ID 591      Container Operation and Distribution Costs on The Work Productivity Terminal on Domestic Containers
Nugroho Dwi Priyohadi, Mudayat, Dian Arisanti, Agung Prasetyo, Sekolah Tinggi Ilmu Administrasi dan Manajemen Kepelabuhan (STIAMAK), Barunawati Surabaya, Indonesia

ID 592      Effect of Operator Performance and Effectiveness Unloading Equipment on Container Handling at Terminal on Domestic Containers
Nur Widyawati, Juli Prastyorini, Anggit Julio, Sekolah Tinggi Ilmu Administrasi dan Manajemen Kepelabuhan (STIAMAK) Barunawati Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia

ID 593      Effectiveness of HMC Equipment, Workload and Work Stress on Work Productivity of Jamrud Terminal Surabaya Employees
Nugroho Dwi Priyohadi, Soedarmanto, Vixtor Mada Hardani, Sekolah Tinggi Ilmu Administrasi dan Manajemen Kepelabuhan (STIAMAK) Barunawati Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya Indonesia

 

 

ID 598      The Effect of SAP S/4 HANA Implementation on the Supply Chain Management Process to Company Benefits in Construction Service Companies
Fadilla Dwi Pratiwi and Jane Sekarsari Tamtana, Civil Engineering Master Program, Faculty of Civil Engineering and Planning,Universitas Trisakti, Jl. Kyai Tapa No.1, Jakarta

ID 599      The Analysis Of Sap Project System Module’s Implementation On Data Accuracy As Net Benefit For Infrastructure Projects
Achmad Jofimar Ali, Civil Engineering Master Program, Faculty of Civil Engineering and Planning, Trisakti University, Jakarta, Indonesia

Jane Sekarsari, Civil Engineering Master Program, Faculty of Civil Engineering and Planning, Trisakti University, Jakarta, Indonesia

ID 600   Selection of Repair and Strengthening Methods Structure Powerhouse To Optimize Operational Activities
Argya Jaganaputra, Bambang E Yuwono, Master Degree Faculty of Civil Engineering and Planning, Trisakti University, Jakarta, Indonesia

 

ID 611      The Effect Of Investment Strategy And Risk Management On Bitcoin Online Trading In Bitcoin Investors, (Study on College Students in Bandung City, Indonesia)

Budi Rustandi Kartawinata, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia, Business Administration

Budi Santoso, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia, Business Administration

Aldi Akbar, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia, Business Administration

R.Susanto Hendiarto, Universitas Widyatama, Jl. Cikutra no 204 A Bandung 40124, Indonesia

ID 612      East Java OPOP: Increasing the Growth of SMEs in Islamic Boarding Schools during the COVID-19 Pandemic
Muhafidhah Novie, Ayu Lucy Larassaty, Laily Muzdalifah and Sharifah Ageng Pratiwi, Management Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia

Elsa Rosyidah, Institute for Research and Community Services, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia

ID 614     The Effect Of Financial Literation On Investing In Indonesia Capital Market (Study on College Students in Bandung City, Indonesia)
Budi Rustandi Kartawinata, Kukuh Panuntun Wicaksono, Aldi Akbar, Faculty of Communication and Business, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

ID 615     Employee Performance Improvement As An Impact of Applying Organizational Culture
Ida Nurnida, Mahendra Fakhri, Anita Silvianita, Nurjuanda, School of Communication and Business Telkom University, Indonesia

ID 616     What Kind of Improvement to Increase Job Satisfaction among The Employees?
Romat Saragih, Anita Silvianita, Mahendra Fakhri, Aldi Akbar, Fauzya Binaprayogi, School of Communication and Business Telkom University, Indonesia

ID 617     The Effect of Organizational Culture toward Employee Performance at Convenience Store in Bandung
M. Yahya Arwiyah, Mahendra Fakhri, Aldi Akbar, Edo Meitanama, School of Communication and Business Telkom University, Indonesia

ID 618     The Influence of Work Ethic on Employee’s Performance of Small-Medium Enterprises Restaurant
Tri Indra Wijaksana, Mahendra Fakhri, Riska Hernayanti Pajar, School of Communication and Business Telkom University, Indonesia

ID  627  BALI GOVERNMENT SUPPORT TO BLOWED UP TOURISM
I Nyoman Sudapet, Agus Sukoco, Elok Damayanti, Ani Wulandari and Amrun Rosyid, Department of Management, Narotama University, Surabaya, Indonesia

Ronny Durrotun Nasihien and Muhammad Ikhsan Setiawan, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Che Zalina Zulkifli, Faculty of Arts, Computers and Creative Industries, Department of Computers, Universiti Pendidikan Sultan Idris, Tanjong Malim, Malaysia

Abdul Talib Bon, Faculty of Technology And Business Management, Department Of Production And Operations Management, Universitas Tun Hussein Onn Malaysia, Parit Raja, Malaysia

ID 628   Antiosteoporotic activity of Pandanus odoratissimus seed extract in ovariectomized rats
Sri Endarti Rahayu, Suprihatin, Meslina Astuti Manik, Ernawati Sinaga Suprihatin, Faculty of Biology, Universitas Nasional Jakarta, Indonesia

ID 629   Species Richness of Sea Cucumbers in Saleh Bay Based on Catch of Fishermen
Neri Kautsari, Aquatic Resources Management, Samawa University, Sumbawa Besar, Indonesia

Ilham Syahputra, Wildlife Conservation Society, West Nusa Tenggara, Indonesia

ID 630   Antimicrobial Activity of Endosymbiont Bacteria Isolated from Marine Sponges Collected from Kotok Kecil Island, Jakarta
Alvira Noer Effendi, Noverita, and Ernawati Sinaga, Faculty of Biology, Universitas Nasional, Jakarta, Indonesia

Tri Aryono Hadi, Research Center for Oceanography, Indonesian Institute of Sciences

ID 631   Performance Evaluation of Hybrid ZigBee-Fiber Optic for Wireless Sensor Network System
Raihan Zaky Thamrin, Octarina Nur Samijayani, Dwi Astharini, Suci Rahmatia, Electrical Engineering Department, University of Al Azhar Indonesia, Jakarta, Indonesia

ID 632   Utilization of Dates (Phoenix dactylifera L.) and Bilimbi (Averrhoa bilimbi L.) in Making Effervescent Tablet
Melanie Cornelia, Cindy Oktavia, Food Technology Study Program, Faculty of Science and Technology, Pelita Harapan University, Lippo Karawaci, Tangerang 15811, INDONESIA

ID 633   Quality Analysis of Carrot and Tomato Juices Formula to Increase Local Resources Added Value
Farida, Yenisbar, Faculty of  Agriculture, Universitas Nasional, Jakarta;

ID 634   Characteristics Of Vegetable Canistel Mousse Dessert (Pouteria campechiana) Using Polysacaride Stabilizer
Etty Hesthiati, Inkorena GS Sukartono, Tri Waluyo and Nurul Hanifah, Faculty of Agriculture, Universitas Nasional, Indonesia

ID 635   SURVEY OF DUGONGS (Dugong dugon) ON CEMPEDAK ISLAND, WEST KALIMANTAN
Galih Hakim Antarnusa And Achmad Yanuar, Department of Biology Graduate School, Universitas Nasional, Menara UNAS II, Jl. Harsono RM, Ragunan, Jakarta Selatan 12550, Indonesia

Richard Moore, Yayasan IAR Indonesia, Jl. Curug Nangka, Kp. Sinarwangi Ciapus – Bogor, 16610

Urai Iskandar, Yayasan Webe Konservasi Ketapang , Jl. RM Sudiono no.49A, Kelurahan Kantor, Kecamatan Delta Pawan, Ketapang, Kalimantan Barat, Indonesia.

ID 637   Model of Strengthening Technology Literacy for Junior High School Teachers in The Era of The Industrial Revolution 4.0
Soewarto Hardinata, Yudhie Suchyadi and Dian Wulandari, Education Management Study Program, Graduate School, Universitas Pakuan, Bogor, Indonesia

ID 638   Using a Multimedia for natural Science Learning in Improving Concept skills of Elementary School Teachers
Yudhie Suchyadi, Oding Sunardi, Eka Suhardi, Fitri Siti Sundari, Fitri Anjaswuri, and Dita Destiana, Faculty of Teacher Training and Education, Universitas Pakuan, Bogor, Indonesia

ID 646   Experiences of the Yapis in Extending Human Resources in Tanah Papua
Rudihartono Ismail, Universitas Amal Ilmiah Yapis Wamena, Indonesia

Helmawati Helmawati, Universitas Islam Nusantara, Indonesia

Ismail Suardi Wekke, Institut Agama Islam Negeri (IAIN) Sorong, Indonesia, The Jusuf Kalla Research Center for Bugis Makassar Cultural Studies, Universitas Muslim Indonesia

Didiharyono Didiharyono, Andi Djemma University, Palopo, Indonesia

ID 650   Underlying Mechanisms of Transit-Oriented Development: A Conceptual System Dynamics Model; the case for Qatar
Aya Hasan AlKhereibi, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University, Doha, Qatar

Nuri Onat, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University, Doha, Qatar

Raffaello Furlan, Department of Architecture and Urban Planning College of Engineering, Qatar University, Doha, Qatar

 

ID 656   Exploring the Community Involvement in Smart City through a Co-creation Approach in Indonesia
Imam Yudhi Prastya, Hardi Warsono and Augustin Rina Herwati, Faculty of Social and Political Sciences, Universitas Diponegoro, Tembalang, Semarang, Jawa Tengah 50275, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 662   Collaborative Governance on Slum Upgrading in Cultural Heritage Area: A Case Study of Pulau Penyengat, Indonesia
Surjadi, Hardi Warsono and Augustin Rina Herwati, Faculty of Social and Political Sciences, Universitas Diponegoro, Tembalang, Semarang, Jawa Tengah 50275, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

 

ID 664   The Impact of Covid-19 on Micro, Small, and Medium Enterprises in Central Java, Indonesia: The Need for Economic Recovery
Wiwin Widiastuti, Hardi Warsono and Augustin Rina Herwati, Faculty of Social and Political Sciences, Universitas Diponegoro, Tembalang, Semarang, Jawa Tengah 50275, Indonesia

Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor Malaysia

ID 669   Improving Concrete Quality on Structural using Lightweight Aggregates (LWA): A Comprehensive Review
L. Oksri Nelfia, Lecturer, Civil Engineering Department, Universitas Trisakti, Jakarta, Indonesia

Candra Supriyatna, Student, Civil Engineering Department, Universitas Trisakti, Jakarta, Indonesia

Agung Sumarno, Researcher, Research Center for Biomaterials – Indonesian Institute of Sciences

ID 670   Biodiversity in Urban Area: Potential Biodiversity of Tanjung Priok, North Jakarta and the Impact of Conservation Programs
Nonon Saribanon, Fauziah Ilmi, and Annisa Haryanti Nurhasanah, Universitas Nasional, Pasar Minggu, South Jakarta, Indonesia

Dede Niman and Eka Octaviyatna Mulyadi, PT Indonesia Power Priok POMU, Indonesia

ID 671   SEMI-MODERN MARKET COMPETITIVENESS STRATEGY IN THE ERA OF DIGITAL DISRUPTION
Fredi Andria, Sri Hartini, and Sri Nursanti, Department of Management, Faculty of Economics and Business, Pakuan University, Bogor, Indonesia

ID 689   A BLUETOOTH TECHNOLOGY CONTROLLED WHEELCHAIR
Akande Saheed, Ter Kumater Peter and Mgbeze Emmanuel,  Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado-Ekiti, Nigeria

ID 695   SUSTAINABLE CIRCULAR SUPPLIER SELECTION CRITERIA: AN EMPIRICAL STUDY
Maha Morssi, Department of Design, Manufacturing and Engineering Management, University of Strathclyde, Glasgow, United Kingdom,
College of International Transport & Logistics, Arab Academy for Science, Technology & Maritime Transport, Alexandria, Egypt

ID 696  Risk Modeling Analysis of A Building Project and Its Impacts on Urban Labor Accidents in Surabaya
Mokhamad Handy Budiarto, Muhammad Ikhsan Setiawan, Adi Prawito, Ronny Durrotun Nasihien and Sri Wiwoho Mudjanarko, Department of Civil Engineering, Narotama University, Indonesia

Mohd Irwan Juki, Faculty of Civil Engineering And Building Environment, UTHM, Parit Raja, Malaysia

ID 700   Performance Assessment Analysis of XYZ Private Universities Using Balanced Scorecard Method
Hendarto, Hermien Tridayanti, Agus Sukoco, Amrun Rosyid, Master of Management Department, Narotama University, Indonesia, Jalan Arif Rahman Hakim No.51, Surabaya, Indonesia

ID 701   BUILDING INFORMATION MODELING (BIM) IMPLEMENTATION MODEL FOR FACILITY MANAGEMENT
Ary Sunantiyo, M. Ikhsan Setiawan, Master of Civil Engineering Study Program, Narotama University Surabaya, Jalan Arief Rahman Hakim 51, Sukolilo, Surabaya

ID 703   Optimizing of the Processing of Sulphide Ores Using Neural Network Technologies
Gulnara Abitova and Elvira Aitmukhanbetova, Department of Intelligent Systems & Cyber Security, and Department of Computer Engineering, Astana IT University, Nur-Sultan, Kazakhstan

Leila Rzayeva, Korlan Kulniyazova, and Ali Myrzatay, Department of System Analysis and Control, E.N. Gumilyov University, Nur-Sultan, Kazakhstan

ID 704   ANALYSIS OF QUALITY OF SERVICE, PRICE AND PRODUCT QUALITY TO PURCHASE DECISIONS IN PT. JAPFA SIDOARJO
Muslikhun, STIE MAHARDHIKA

ID 705   ANALYSIS OF EFFECT OF LEADERSHIP STYLE ANDENVIRONMENT WORKUSING THE PERFORMANCE OF EMPLOYEES WORK MOTIVATION as an intervening variable (Case Study at PT. Suparma TBK)
Nuning Nurna Dewi, Economic Lecture of the University MaarifLatif Hashim

ID 707   Anomaly Detection on the High Throughput Network of the ATLAS TDAQ System
Mitchell Phiri, Simon H. Connell, Pathmanathan Naidoo, Department of Mechanical Engineering Science University of Johannesburg, Johannesburg – 2006, South Africa

Mikel E. Pozo Astigarraga, ATLAS Trigger and Data Acquisition, European Organisation for Nuclear Research, Meyrin – 1217, Switzerland

Dave Nicholls, NESCA Board, South African Nuclear Energy Corporation, North West Province – 0240, South Africa

ID 708 Model for measure supply risk in supply chains: a SARS-CoV-2 crisis case study
Markus Mauksch, Sensirion Holding AG, Switzerland

Pedro Espadinha-Cruz and Helena Carvalho, UNIDEMI, Departamento de Engenharia Mecânica e Industrial, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal

ID 710 VALUE CHAIN COLLABORATION, MSMEs STRATEGY IN THE COVID PERIOD
Dini Verdania Latif, Istanbul Gelisim University, Turkey

Diana Veranita Latif, Founder of Oralie

ID 711 TAX HOLIDAY INCENTIVE STRATEGY DURING THE COVID-19 PANDEMIC PERIOD TO INCREASE INVESTMENT IN  INDONESIA
Novianita Rulandari, Chairil Anwar Pohan, Alian Natision, Mohammad Sofyan, Putri Ayu Lestari
Institut Ilmu Sosial dan Manajemen STIAMI

ID 712 Factors of Successful Adoption of E-Filing during The Covid-19 Pandemic
Agus Arianto Toly, Alicia Wijaya, Priscilia Geovany Lewa, Sonia Frensiana Tjung, Tax Accounting Program, Universitas Kristen Petra, Surabaya.

ID 715 Higher Order Thinking Skill (HOTS) and Bloom Taxonomy Revised
Adirasa Hadi Prasetyo and Yetti Hidayatillah, Guidance and Counseling,Civic Education, STKIP PGRI Sumenep, Sumenep,Indonesia

Supian, History Departement, Jambi University, Jambi, Indonesia

Muhammad Fauzy Emqi, Tribhuwana Tungga Dewi University, Malang, Indonesia

Ihsan Nasihin, Buana Perjuangan University, Karawang, Indonesia

ID 717 Investment Decision with Analytical Network Process Method
Niken Savitri Primasari, Accounting Department of Economic Business and Technology Digital Faculty Nahdlatul Ulama, Surabaya University Raya Jemursari 57, Wonocolo 50237, Indonesia

Ima Kurniastuti, Information Systems Department of Economic Business and Technology Digital Faculty, Nahdlatul Ulama Surabaya University Raya Jemursari 57, Wonocolo 50237, Indonesia

ID 718 Analysis of Trigger Accounting Fraud: Individual and Organizational Culture Aspects
Putu Firda Febriyanti Suartha and Desak Nyoman Sri Werastuti, Master of Accounting, Ganesha University of Education

ID 719 Enhancing MSME Performance through Digital Marketing and Innovation with Government Policy as Moderating Effect
Nanik Istianingsih, Sarjon Defit and Zefriyenni, Lecture of Management Doctoral Program, UPI YPTK Padang, Indonesia

ID 721 Patient Satisfaction of Dental and Oral Health Service Facility based on Digital Patient Experience Driven Innovation
Pri Agung Danarahmanto, Academy of Medical Records and Health Informatics Bandung (APIKES Bandung) Bandung, West Java 40122, Indonesia

Julia Famor Pratami, Academy of Medical Records and Health Informatics Bandung (APIKES Bandung) Bandung, West Java 40122, Indonesia

M. Dana Prihadi, Academy of Medical Records and Health Informatics Bandung (APIKES Bandung) Bandung, West Java 40122, Indonesia

ID 722   Valuation of Adaro Energy Ltd (ADRO.JK) Stock Price as Blue-Chip Stock in 2021
Trimono, I Gede Susrama Mas Diyasa, Mohammad Idhom, Sugarto, Data Science Study Program, Pembangunan Nasional “Veteran” University, Surabaya, 60294, Indonesia

ID 723 RECOMMENDATIONS FOR TOURISM RECOVERY POLICY POST OUTCOME CORONA VIRUS DISEASE 2019 (COVID-19) IN BALI BASED ON THE SMART BALI BACKPACKER APPLICATION
Akhmad Fauzi, Eristya Maya Safitri, Kartika Maulida Hindrayani, Ilmatus Sa’diyah, Farkhan, Muhammad Luthfirrohman, Mohammad Naufal Pratama, I Gede Susrama Mas Diyasa, University of Pembangunan Nasional “Veteran” Jawa Timur, Surabaya, Indonesia

ID 724 Visualizing Tweets Text Analysis of Indonesian Religion Figures on Moderate and Radicalism using Sentiment Analysis and Word Clouds
Tresna Maulana Fahrudin, Amri Muhaimin, Prismahardi Aji Riyantoko, Kartika Maulida Hindrayani, Department of Data Science, Faculty of Computer Science, Universitas Pembangunan Nasional “Veteran” Jawa Timur Surabaya, Indonesia

ID 726 UTILIZATION OF MAGGOT BLACK SOLDIER FLY (BSF) CULTIVATION FOR FISH FEED
Deffi Ayu Puspito Sari, Richa Andreina , Prismita Nursetyowati, Diki Surya Irawan, Environmental Engineering Bakrie University, 12940, Indonesia

Darmono Taniwiryono, Homebase Innovation Center

ID 727 Change Management: A Strategy for Developing BUMDES
Sayekti Suindyah Dwiningwarni, Chamariyah, Sujani, Ja’far Shodiq, Juniyanti DP, and Ardianti Agustin, University of Wijaya Putra, Surabaya, Indonesia

Syamsiyah Yuli D, University of Muhammadiyah Yogyakarta, Indonesia

ID 728 AN ASSESMENT DETERMINATION ON THE SME’S INTERNATIONAL PERFORMANCE AS A COMPETITIVE ADVANTAGE IN INDONESIA
Seprianti Eka Putri, Universitas Bengkulu, Indonesia

ID 729 E-Learning Platform to Assess Students’ Performance in Industrial Revolution 4.0

Ana Christanti, Muawwinatul Laili, Evi Mahsunah and Masyitah Noviyanti, English Language Education Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia

ID 730 HOW IMPORTANT IS BUSINESS ETHICS IN CORPORATE STRATEGY
Chairul Iksan Burhanuddin, Aulia, Alamsjah, Firmansyah, University of Muhammadiyah Makassar

ID 731 A Design of Enterprise System View on a Restaurant Waiting Time
Fadi Aljuhani, Hashim AlDabbagh, Jameel Mujlid, Anas Alzahrani, and Sameer Maimani, Industrial Engineering Department
King Abdualziz University, Jeddah, Makkah, KSA

ID 732 UNIVERSITY ANALYSIS ON DIGITAL CONSTRUCTION PROGRAM: IMPLEMENTATION & IMPACT OF MBKM INTERNSHIP IN CONSTRUCTION & INFRASTRUCTURE INDUSTRY AT NAROTAMA UNIVERSITY
Julistyana Tistogondo, Farida Hardaningrum, Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko, Diah Ayu Restuti Wulandari, Ronny Durrotun Nasihien, Hendro Sutowijoyo, Adi Prawito, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of System Information, Narotama University, Surabaya, Indonesia

Tubagus Purworusmiardi, Department of Management, Narotama University, Surabaya, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

ID  733      Technology Service Delivery in Urban Transportation Business Strategy in Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Wilson Rajagukguk, Department of Management Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta, Indonesia

ID 756 Effect of Investment Opportunity Set, Firm Size, Institutional Ownership And Dividend Policy on The Firm Value In Automotive and Components Companies Listed on The Indonesia Stock (2015-2019 Period)
Agung Fajar Ilmiyono, Hari Gursida, Ellyn Octavianty, and Ani Mulyani, Department of Accounting, Faculty of Economics and Business, Universitas Pakuan, Bogor, Indonesia

ID 757 Cooperative And Msme Empowerment Strategies in Economic Recovery During The Covid-19 Pandemic in Bogor Regency Indonesia 
Dinalara D Butarbutar and Mustika Mega Wijaya Department of Law, Faculty of Law Pakuan University Bogor, Indonesia

ID 758 Optimization Regional Original Income (PAD) of Economic Growth Bogor City 2015-2020 (During Covid-19) 
Retno Martanti Endah Lestari, Ernadhi Sudarmanto, Antania Hanjanilia Ristiyana, Accounting Departement, Economics and Bussiness Faculty, Pakuan University Bogor, West Java, Indonesia

ID 759 Soft Skills Improvement Of Youth Organization : Entering The Work Environment 
Salmah, Fredi Andria, and Amelia Rahmi, Faculty of Economics and Business Pakuan University Bogor, Indonesia

ID 760 Implementation of Criminal Sanctions in Law Number 6 of 2018 Concerning Health Quarantine for Large-Scale Social Restriction Breakers in The Jabodetabek Area 
Sapto Handoyo DP and Nazaruddin Lathif, Departement of Law, Faculty of Law Pakuan University, Bogor Indonesia

ID 763 Study of Implementation Planning of Electronic Road Pricing System on Jakarta
Andri Irfan Rifai, Faculty of Civil Engineering and Planing, University of Internasional Batam, Indonesia
Yasmin Ramadian, Muhammad Isradi, Amar Mufhidin Faculty of Civil Engineering and Planing University of Mercubuana Jakarta, Indonesia

ID 764 Analysis of Pedestrian Services in Metropolitan Cities: Case of Jakarta Business Area 
Andri Irfan Rifai, Faculty of Civil Engineering & Planning, University of Internasional Batam, Indonesia
Adinda Fajarika Akhir, Muhammad Isradi, Amar Mufhidin Faculty of Civil Engineering & Planning, University of Mercu Buana Jakarta, Indonesia

ID 765 Analysis of Pavement Thickness Planning and Overlaying Method on Trans Sumatera Toll Road, Pekanbaru – Dumai
Muhammad Isradi, Joewono Prasetijo, Nurani Hartatik, Faculty of Engineering and Technology, University Tun Hussein Onn Malaysia, Malaysia
Indah Suryaningtyas, Widodo Budi Dermawan, Faculty of Engineering, University Mercu Buana Jakarta, Indonesia
Andri Irfan Rifai, Faculty of Civil Engineering and Planning, University of International Batam, Indonesia

ID 847 The Influence of Technology-based PBL Learning Model, Learning Method, Learning Motivation on Entrepreneurship Attitudes in Economics Education Department students of STKIP PGRI Jombang
Munawaroh, Nanik Sri Setyani, and Lina Sulistyowati, Economic Education Department STKIP PGRI Jombang Pattimura street III/20, Jombang-East Java, Indonesia

ID 848 Language Mastering Reflected In The Speaking Skill Of Mentally Retarded Students at SLBN 1 Jombang East Java, Indonesia
Heny Sulistyowati, Department of Indonesian Language Education, STKIP PGRI Jombang, Indonesia
Muh Fajar, Department of English Language Education, STKIP PGRI Jombang, Indonesia

ID 855 The Effect Of Disruptive Era And New Product On Innovative Product Launches 
Yusuf Amrozi, Dwiky Arfiansyah Nugroho, Rike Excella Putri, Universitas Islam Negeri Sunan Ampel Surabaya, Surabaya, Indonesia
Joko Suyono, Narotama University, Surabaya, Indonesia

ID 856 The Mediating Role of Work Environment in Relationship Between Leadership and Job Promotion on Employee Performance
Yohanes Sugiyanta, Joko Suyono, Narotama University, Surabaya, Indonesia
Damarsari Ratnasahara Elisabeth, Sekolah Tinggi llmu Ekonomi Mahardhika, Surabaya, Indonesia
Zulifah Chikmawati, Universitas Nadlatul Ulama Sidoarjo, Indonesia
Che Zalina Zulkifli, Universiti Pendidikan Sultan Idris, Malaysia

 

 

Need to add abstracts and papers from speakers (keynote, plenary, panels, etc.)