Proceedings – 4th European Rome Conference 2021
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 978-1-7923-6127-2
Papers will be added in the IEOM Forefront Publication Database, Full papers will be indexed in Scopus and EBSCO.
ID 002 Impact of Increasing Replenishment Frequency on Convenience Store Inventory: A Mexican Case
Mireya Elizondo, Mariana Villarreal, Vanessa Ocañas and Bernardo Villarreal, Department of Industrial Engineering, Universidad de Monterrey, San Pedro Garza Garcia, N.L. Mexico
ID 026 Challenges in Autonomous Vehicle Development
Annamalai Pandian, Mechanical Engineering Department, Saginaw Valley State University, University Center, MI 48710, USA
ID 030 Design and Analysis of Joint Torque Sensor for Safe Human-Robotic Collaboration
Muhammad Bilal and Sajid Iqbal, Department of Mechatronics and Control Engineering, University of Engineering and Technology Lahore, Pakistan
Muhammad Nadeem Akram, Mechanical, Automotive, and Materials Engineering Department, University of Windsor, Windsor, Ontario, Canada
ID 055 Mobility Problems with Predicted Uncertainties in Transportation Network due to Storm Impacts
Ketut Gita Ayu and Pitu Mirchandani, School of Computing, Informatics, and Decision Systems Engineering, Arizona State University, Tempe, AZ, USA
ID 059 Preparing a Global Workforce with a Local Internship Program
Catherine T. Amelink, Office of the Provost, Vice Provost for Learning Systems Innovation and Effectiveness and Department of Engineering Education, Virginia Tech, Blacksburg, VA 24060, USA
Antonio Sartal, Faculdade de Ciencias e Tecnologia, Universidade Nova de Lisboa, Campus Universitario, Caparica 2829-516, Portugal
Josep Llach, Mechanical and Industrial Engineering Department, Campus de Montilivi, 17071 Girona
ID 095 The Effect of Brand-Relationship Quality on Positive Word-of-Mouth Intention
Mahmut Selami Akin, Business Management, Vocational School of Social Sciences, Istanbul Medipol University, 34810, Beykoz, Istanbul, Turkey
Onur Dogan, Department of Industrial Engineering, İzmir Bakırçay University, 35665, İzmir, Turkey
ID 098 A Combined Approach for Predicting Operational Performance in Port Terminals
Ícaro Romolo Sousa Agostino, Satie L. Takeda-Berger and Enzo Morosini Frazzon, Industrial and Systems Engineering Department, Federal University of Santa Catarina, Florianópolis, SC 88040-900, Brazil
Adriano Mendonça Souza, Statistics Department, Federal University of Santa Maria, Santa Maria, RS 97105-900, Brazil
ID 119 A Systematic Review of Indicators Used to Measure Industrial Sustainability
Azemeraw Tadesse Mengistu and Roberto Panizzolo , Department of Management and Engineering , University of Padova, Vicenza 36100, Italy
ID 121 Integration of Freight Distribution Services: A Case Study in Indonesia
Reslyana Dwitasari, Suci Susanti, and Zusnita Meyrawati, Ministry of Transportation, Jakarta, Indonesia
Munawir Bangsawan, Milenialinstitute.id, Jakarta, Indonesia
Yandra Rahadian Perdana, Department of Industrial Engineering – Faculty of Science and Technology, Sunan Kalijaga State Islamic University, Yogyakarta, Indonesia
Mario Fargnoli, Nicolas Haber, Davide Platti and Massimo Tronci, Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Italy
ID 124 Lean Supply Chain strategies based on the pull-production system: a simulation-based analysis
Satie Ledoux Takeda-Berger, Guilherme Luz Tortorella, Ícaro Romolo Sousa Agostino and Enzo Morosini Frazzon, Industrial and Systems Engineering Department, Federal University of State of Santa Catarina, Florianópolis, Brazil
Tamie Takeda Yokoyama, Production Engineering Department, University Center UniSociesc , Joinville, Brazil
ID 158 Inventory Model for Raw Material: A Case Study of a Chemical Company
Cristina González-Garzón, Yakcleem Montero-Santos and Ramiro V. Saraguro Piarpuezan, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Y Nhu Ngoc Hoang, School of International Business and Marketing , University of Economics Ho Chi Minh city, Ho Chi Minh city, Vietnam
Ngan Tuyet Truong, School of Business and Management, RMIT University, Ho Chi Minh city, Vietnam
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, UK
ID 163 Safety Management of the Characterization Activities of Illegal Dumpsites
Mara Lombardi, Department of Chemical Engineering Materials and Environment (DICMA), Sapienza – University of Rome, via Eudossiana 18, 00184 – Rome, Italy, Quintilio Napoleoni and Francesca Mauro, Department of Civil, Building and Environmental Engineering (DICEA), Sapienza – University of Rome, via Eudossiana 18, 00184 – Rome, Italy, Mario Fargnoli, Department of Chemical Engineering Materials and Environment (DICMA), Sapienza – University of Rome, via Eudossiana 18, 00184 – Rome, Italy, Simona Berardi, Department of Technological Innovations and Safety of Plants, Products and Anthropic Settlements (DIT), Italian National Institute for Insurance against Accidents at Work (INAIL), Via Roberto Ferruzzi 38-40, Rome, Italy
ID 165 Sustainable Introduction of Industry 4.0: A Systematic Literature Review
Erwin Rauch, Industrial Engineering and Automation (IEA), Faculty of Science and Technology, Free University of Bolzano-Bozen, Bolzano, Italy
David S. Cochran, Center of Excellence in Systems Engineering, Purdue University Fort Wayne, Fort Wayne, IN, 46805, USA
ID 166 World-Class Manufacturing and Industry 4.0 as Strategic Differential – Case Studies
José Daniel Rodrigues Terra and Fernando Tobal Berssaneti, Production Engineering Department, University of Sao Paulo, Cidade Universitária, Sao Paulo, Brazil
José Alberto Quintanilha, Transport Engineering Department, University of Sao Paulo, Cidade Universitária, Sao Paulo, Brazil
Hanan Maoz, and Efrat Guli, Department of Management, Track in Technology Management , Bar-Ilan University, Ramat-Gan, Israel
Gozde Onder Uzun, Berna Dengiz and Imdat Kara, Industrial Engineering Department, Baskent University, Ankara, Turkey
Oya Ekin Karasan, Industrial Engineering Department, Bilkent University. Ankara, Turkey
ID 172 Does Payout Policy Affect Firms’ Performance? Evidence from Textile Industry in India
Vikas Sangwan, Accounting and Finance, Jindal Global Business School, O.P. Jindal Global University, Sonipat, Haryana 131001, INDIA, Shivam Kushwaha, Department of Industrial and Management Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, INDIA
Yevgen Zbykovskyy, Iryna Shvets, Donetsk National Technical University, Pokrovsk, 85300, Ukraine
Oksana Turchanina, António Castelbranco, CIAUD – Research Centre of Architecture, Urbanism, Design, Lisbon School of Architecture, University of Lisbon, Lisbon, 1349-063, Portugal
ID 174 Exploring Mobile Banking Adoption through Causal-Loop Diagrams
Pan Zhang, Raúl Leal Ascencio and Giles Poulsom, Centre for Systems Engineering, University College London, 3 Taviton St, London WC1H 0BT
ID 175 Risks and Benefits of Artificial Intelligence in Small-and-Medium Sized Enterprises
Christoph Szedlak, Bert Leyendecker, Holger Reinemann, Maik Kschischo and Patrick Pötters
University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
ID 176 Developing a Methodology for Category Management in Manufacturing companies.
Irina V. Burlakova and Ludmila S. Ruzhanskaya, International Economy and Management Dept., Ural Federal University named after the first President of Russia B.N. Yeltsin, 19 Mira St., Ekaterinburg, 620002, Russia
Sri Wiwoho Mudjanarko, Atik Wahyuni*, Rizal Bahaswan, Departement of Civil Engineering, Narotama University
Dadang Supriyatno, Departement of Civil Engineering, Universitas Negeri Surabaya
Joewono Prasetijo, Department of Transportation Engineering Technology, Universiti Tun Hussein Onn Malaysia, 84600 Pagoh, Johor, Malaysia
Firdaus Pratama Wiwoho, Departement of Environmental Engineering, Institut Teknologi Sepuluh Nopember, Surabaya,60117, INDONESIA
Arya Sevgen and Abdullah Dasci, Business School, Sabanci University, Istanbul, Turkey
ID 234 Optimization of the production flow for a machine and tool shop: A Case Study
Mauricio A. Ramírez-Crespo, Yakcleem Montero-Santos and Ramiro V. Saraguro Piarpuezan, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
ID 236 Technology Service Delivery in Urban Transportation Business Strategy in Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Wilson Rajagukguk, Department of Management Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta, Indonesia
Perak Samosir, Department of Mechanical Engineering, Institut Teknologi Indonesia, Tangerang Selatan 15314, Indonesia
ID 238 The impact of digitalization on the Define phase of the Six Sigma methodology
Jasmin Ohlig, Patrick Poetters and Bert Leyendecker, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
ID 248 An Optimization Model for Sizing Decisions of Grid-Connected Photovoltaic System
Ahmed M. Attia, Department of Systems Engineering, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia
ID 255 Performance of Named Data Networking in Connected Vehicles
Zakaria SABIR and Aouatif AMINE, ILM, ENSA, National School of Applied Sciences, Ibn Tofail University
Lucia Vigoroso, Giorgia Bagagiolo and Eugenio Cavallo, Institute of Sciences and Technologies for Sustainable Energy and Mobility (STEMS), National Research Council of Italy (CNR), Strada delle Cacce, 73 – 10135 Torino,
Federica Caffaro, Department of Education, Roma Tre University, Via del Castro Pretorio, 20 – 0018, Rome, Italy
ID 292 Analysis and Improvement of Product Management Processes – a Case Study
Francisco Leite (1) and José Faria (1, 2) and Américo Azevedo (1, 2)
(1) Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal
(2) INESC TEC, Rua Dr. Roberto Frias, Campus da FEUP, 4200-465 Porto, Portugal
Ivo Pereira, Polytechnic of Porto, Engineering Institute, Rua Dr. António Bernardino de Almeida, 431, 4249-015 Porto, Portugal
Manuel Fernandes (1) and Américo Azevedo (1, 2)
(1) Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto
(2) INESC TEC, Rua Dr. Roberto Frias, Campus da FEUP, 4200-465 Porto
ID 301 Impact of COVID-19 on the Trucking Industry
Hudson Brooks, Rachel Davis, Jack Dwyer, Isabella Kew, Nicky Rodriguez and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 302 The Effects of COVID-19 on the California Metal Casting Industry Supply Chain
Alex Garcia Cruz, Cole Pike, Elliott Hofferth, Balthazar Olivier, Hunter Baird-Wise and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 303 The Global COVID-19 Vaccine Supply Chain
Darion Guan, Hanley Kerh, Lauren Knott, Ethan Norman, Jack McGuinness and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 304 Effects of COVID-19 on United States Food Industry and Sharing Economy
Cade Alonzo, Roger Chevalier, Nick Mediati, Jack Surdyk, Andy Wei and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 305 Applications of Augmented Reality to Reduce Risk in Supply Chain Management
Angela Colabella, Collette Lee, Lane Pledger, Monique Cendejas, Vikrant Mannemela and Mohamed Awwad, Industrial and Manufacturing Engineering Department , California Polytechnic State University, San Luis Obispo, CA 93407, USA
Gattamelata Davide, Puri Daniele, and Vita Leonardo, Department of technological innovations and safety of plants, products and anthropic settlements, National Institute for Insurance against Accidents at Work (Inail), Via di Fontana Candida, 1, 00078 Monte Porzio Catone, Italy
Mario Fargnoli, and Mara Lombardi, Department of Chemical Engineering Materials Environment (DICMA), Sapienza – University of Rome,
via Eudossiana 18, 00184 – Rome, Italy
ID 307 Scheduling of Assembly Systems in the Footwear Industry
João Basto and José Soeiro Ferreira, INESC TEC – Technology and Science, Faculty of Engineering, University of Porto, Porto, Portugal
Rui Diogo Rebelo, INESC TEC – Technology and Science, Porto, Portuga
Thalia Nair and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa
ID 309 Inefficiencies of the COVID-19 Vaccine Distribution in California
Jared McMullen, Matt Akins, Matt Grywczynski, Jack Rocca, Carter Bergquist and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 310 Crude Palm Oil Waste Treatment Facility with Carbon Tax Benchmarking
Michael Sembiring, Department of Logistics Engineering, Universitas Pertamina, Jakarta, 12220, Indonesia
Dina Nurul Fitria, Principal, Amina Research & Business Consulting, Jakarta, 12190, Indonesia
A.A.N. Perwira Redi, Industrial Engineering Department, BINUS Graduate Program – Master of Industrial Engineering, Bina Nusantara University, Jakarta, Indonesia
ID 311 Development of an Ergonomically Designed Infant Walker
John Paolo A. Isip, and John Mark A Nanip,Industrial Engineering Program – College of Information Technology and Engineering, La Consolacion University Philippines, Valenzuela St., Capitol View Park Subdivision, Malolos, 3000 Bulacan
ID 313 The Effect of Remote Working on Employees Productivity Levels in South Africa
Saijal Sucheran and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa
Zeynep Didem Unutmaz Durmuşoğlu, Alptekin Durmuşoğlu
Gaziantep University, Department of Industrial Engineering, Gaziantep, Turkey
Alptekin Durmuşoğlu, Zeynep Didem Unutmaz Durmuşoğlu, Gaziantep University, Department of Industrial Engineering, Gaziantep, Turkey
ID 316 A Supply Chain System with Capital Constraints Considering Various Salvage Values
Song-Man Wu, Felix T.S. Chan and S.H. Chung, Industrial and System Engineering Department, The Hong Kong Polytechnic University, Hung Hum, Hong Kong, China
ID 317 A Critical Evaluation of Budget Practices Applied in the Manufacturing Sector for Optimal Production
M. M. Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 319 An Assessment of the Impact of Covid 19 on Zimbabwean Universities Students
M. M. Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
T. N. Mutusva, Department of Mathematical Sciences, School of Industrial Sciences, Harare Institute of Technology, Zimbabwe
N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 320 An Educational Computer Aided Heat Exchanger Design Software
Mohamed Edali, Asma Milad, Walid Alaswad, Zaed Sahem, and Faraj BenRajeb, Department of Chemical and Petroleum Engineering, Elmergib University, Elkhoms, Libya. Creativity Group for Technical Services, Ottawa, Ontario, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Giulia Barucco, Niccolò Pampuro, Lucia Vigoroso, Eugenio Cavallo, Istituto di Scienze e Tecnologie per l’Energia e la Mobilità Sostenibili (STEMS),
National Research Council of Italy (CNR), Strada delle Cacce, 73, 10135 Torino, ITALY
1Austin Moreira and 2Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, SA
ID 323 Using AHP to deal with Sectorization Problems
Elif Göksu Öztürkᵃ, Ana Maria Rodriguesᵃᵇ, José Soeiro Ferreiraᵃᶜ
ᵃINESC TEC – Technology and Science, Porto, Portugal
ᵇCEOS.PP/ISCAP/P.PORTO, Porto, Portugal
ᶜFaculty of Engineering, University of Porto (FEUP), Porto, Portugal
ID 325 A Review of Recent Research on Green Vehicle Routing Problem
Nida Durmaz, Department of Industrial Engineering, Gebze Technical University, Kocaeli, Turkey
Ayşenur Budak, Department of Industrial Engineering, Gebze Technical University, Kocaeli, Turkey
ID 327 Sequential Rule Mining for Analysis of Customer Movements in Different Visits
Pelin Yildirim Taser, Computer Engineering Department, Izmir Bakircay University, Izmir, Turkey
Onur Dogan, Industrial Engineering Department, Izmir Bakircay University, Izmir, Turkey
Wulan Permatasari, Amin Wibowo, Nurul Indarti, and Rangga Almahendra, Faculty of Economics and Business, Universitas Gadjah Mada, Yogyakarta, Indonesia
Ismet Karacan and Inanc Erdoğan, AN-EL Anahtar ve Elektrikli Ev Aletleri San. A.S., Pendik, 34896, Turkey
Ufuk Cebeci, Department of Industrial Engineering, Istanbul Technical University, Macka, 34367, Turkey
ID 334 How Industrial Internet of Things Enables Engineers to Work Remotely
Christopher Striff, John Takiff, Brandon Drury, Jimmy Algeo, Moummar Nawafleh and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
Nur Athirah Diyana Mohammad Yusof, Karmegam Karuppiah, Putri Anis Syahira Mohamad Jamil, Irniza Rasdi, Vivien How, Sivasankar Sambasivam, Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
Kulanthayan KC Mani, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
ID 336 Design and Implementation of an Automated Feeding System for Poultry Farms
Ifeanyi Chinaeke-Ogbuka, Edward Anoliefo, Augustine Ajibo, Department of Electronic Engineering, University of Nigeria, Nsukka
Cosmas Ogbuka, Department of Electrical Engineering/ACE-SPED, University of Nigeria, Nsukka
Issam Ayyash, Department of Computerized Financing and Banking, College of Business and Economics, Palestine Technical University- Kadoorie,
ID 338 Implementing AHP Analysis to Increase the Detection Accuracy for Drone Detection System
AbdulAziz Bin Shuhaywin and Faisal AlMeshkhas, Engineering and Systems Management Students, College of Engineering, Alfaisal University, Riyadh, Al-Zahrawi Street 11533, KSA
Sobhi Mejjaouli, Assistant Professor, Industrial Engineering Department, Alfaisal University, Riyadh, KSA
Rezky Briliana Islami, Aditya Wardhana, Mahir Pradana, Department of Business Administration , Telkom University, Bandung, 40257, Indonesia
Anouar Hallioui and Brahim Herrou, Industrial Techniques Laboratory, Center for Doctoral Studies in Engineering Sciences and Techniques – Faculty of Sciences and Techniques of Fez, SIDI MOHAMED BEN ABDELLAH University, Fez, Morocco
ID 343 Electronic Marketing Model for Higher Education
Inayatulloh, Information System Department, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
Indra Kusumadi Hartono, Information System Department, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
Muhammad Abrar Kasmin, Sharia Economic Universitas Potensi Utama, Medan City, North Sumatra 20241, Indonesia
ID 344 E-SCM base cloud technology model for Food Supply in Hotel Industry
Inayatulloh, Information System Department, School of Information System, Bina Nusantara University Jakarta, Indonesia
Enggal Sriwardiningsih, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia,
ID 345 Ergonomic Design of Computer Workstation for College Students Studying at Home
Randolf Cabugawan, Homer Laguador, and Kelly Albert Lim, Young Innovators Research Center, Mapúa University, 658 Muralla St. Intramuros, Manila, 1002, Philippines
Ma. Janice J. Gumasing, School of Industrial and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, Philippines
ID 347 SMEs Soft Loan with Decision Support System Model
Inayatulloh and Novan Zulkarnain, Information System Department, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
ID 348 E-learning model for People with Disabilities
Inayatulloh, Information System Department, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
Ade Fadli Fachrul, Character Building Development Center, Bina Nusantara University, Jakarta, Indonesia
Jiayao (Emily) Li, ARQuest SSERN International, Irvine, CA, USA
Haridhar Pulivarthy, ARQuest SSERN International, Kirkland, WA, USA
ID 350 The Impact of COVID-19 on Businesses: An Online Review
Nasser BinObied, Sadeem Almarri and Faisal Alhumaidi, Engineering and System Management Master’s Program
College of Engineering, Alfaisal University, P.O. Box 50927, Riyadh, 11533, Sobhi Mejjaouli, Industrial Engineering Department, College of Engineering, Alfaisal University, P.O. Box 50927, Riyadh, 11533
ID 351 Impact of Covid-19 on the Sierra Leone Brewery Limited Supply Chain
Alpha Umaru Bah and I. Nyoman Pujawan, Department of Industrial Systems & Engineering, Institut Teknologi Sepuluh Nopember ITS, Surabaya, Indonesia
Michael Komah and I Nyoman Pujawan, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 353 Transport Management Practices and Firms’ Performance in Nigeria
Adebayo Iyabo Toyin and Aworemi Joshua Remi, Department of Transport Management, Ladoke Akintola University of Technology, P.M.B. 4000, Ogbomoso, Oyo State, Nigeria
ID 357 E-marketplace issues for SMEs: the Technology Acceptance Model approach
Inayatulloh, Information System Deaprtment, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
Enggal Sriwardiningsih, Management Departement, Binus Business School, Bina Nusantara University, Jakarta, Indonesia,
Indra Kusumadi Hartono, Information Systems Department, School of Information system, Bina Nusantara UniversityJakarta, Indonesia
Prasetya, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia
Rajiv Dharma Mangruwa, Communication and Business-Telkom University, Bandung, Indonesia Azman Hashim International Business School – University of Technology, Malaysia, Malaysia
Muhammad Abrar Kasmin, Universitas Potensi Utama, Medan City, North Sumatra 20241, Indonesia
Novingky Ferdinand, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia
ID 358 E-CRM Model to Increase Hotel Customer Loyalty
Inayatulloh, Information System Deaprtment, School of Information System, Bina Nusantara University Jakarta, Indonesia
Maryani, Information System Deaprtment, School of Information System, Bina Nusantara University Jakarta, Indonesia
Shofa Shofiah Hilabi, Faculty of Engineering andComputer Science, Universitas Buana Perjuangan, Karawang, Indonesia
ID 364 Maximal Queen Placements for the Mod 2 n-Queens Game
Cindy Qiao, (Mentor: Zackary Wolske, Department of Mathematics, University of Toronto), A.Y. Jackson Secondary School, ON, Canada
ID 365 Europe Travel Efficiency
Mason Chen, Stanford OHS, Academy Hall Floor 2 8853 415 Broadway, Redwood City, CA 94063, USA
ID 366 Develop JMP 16_Based STEAMS and Six Sigma DMAIC Training Curriculum for Data Scientist
Mason Chen, Stanford Online High School, San Jose, CA 95131
Charles Chen, Morrill Learning Center, San Jose, CA 95131
David Munyai, and Mushavhanamadi Khathu, Faculty of Engineering and Built Environment Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 369 Role of technology in detecting counterfeit drugs in the forward pharmaceutical supply chain
Mona Haji, Laoucine Kerbache and Mahaboob Sheriff K M, Logistics and Supply Chain Department – College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar
ID 370 Data-driven throughput bottleneck analysis in production systems
Mukund Subramaniyan, Department of Industrial and Materials Science, Chalmers University of Technology
ID 382 Using Aspen Plus to Simulate Pharmaceutical Processes – An Aspirin Case Study
Alisa Douglas, Integrated Biomedical Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, ON, N2L 3G1, Canada
ID 384 Rational Decision-Making in Purchasing Medical Devices
Gulsum Kubra Kaya, Faculty of Engineering and Natural Sciences, Industrial Engineering, Istanbul Medeniyet University, Istanbul, 34700, Turkey
ID 385 Development of an energy monitoring and control interface for the forest products industry
Thomas Hernández, Nadia Lehoux, Louis Gosselin, Department of Mechanical Engineering, Université Laval, Quebec City, QC, Canada
Inayatulloh, Information System Deaprtment, School of Information System, Bina Nusantara UniversityJakarta, Indonesia
Prasetya Cahya S, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia
ID 388 Preferences and Opinions of the University of Jeddah Students Towards Electronic Exams
Ziyad Ahmed Alghamdi, Ali Yahya Albaheth, Mohammad Talal Himidah, Sultan Jamal Alqahtani, Murad Bazar Andejany, Department of Industrial and Systems Engineering, College of Engineering, University of Jeddah
ID 389 Conflict Minerals Supplier due Diligence Process Improvement
Diana Joy Callangan, Maria Victorina Rada, and Maria Janice Gumasing, Master of Engineering – Industrial Engineering, Mapua University, 658 Muralla St, Intramuros, Manila, 1002 Metro Manila, Philippines
Christian Leon-Cardenas, Patrich Ferretti, Merve Sali, Gian Maria Santi, Francesco Gianese, Nicola Crescentini, Leonardo Frizziero, Giampiero Donnici and Alfredo Liverani, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Viale Risorgimento, 2 – 40136, Bologna, Italy
Giovanni Trisolino, Paola Zarantonello, Stefano Stallone and Giovanni Luigi Di Gennaro, IRCCS–IOR – Rizzoli Orthopaedic Institute, Pediatric Orthopaedics and Traumatology, 40136 Bologna, Italy
ID 393 High-Profit Investments During COVID-19 in Stocks and Cryptocurrency
Sobhi Mejjaouli, Assistant Professor, Industrial Engineering Department, Alfaisal University, Riyadh, Saudi Arabia
Joseph Taha Almudawah, Ibrahim Hamdan and Zaid Yaseen, Mechanical Engineering Department, Alfaisal University, Riyadh, Saudi Arabia
Alimamy Kamara and Sallieu Koroma, Department of Accounting and Finance, Fourah Bay College, University of Sierra Leone, Freetown, Sierra Leone.
Alpha Umaru Bah, Department of Industrial Systems & Engineering, Institut Teknologi Sepuluh Nopember ITS., Surabaya, Indonesia.
Yvana Sal Sabila, Hana Fajria Pahlawan and Indah Purnamaningtyas, Department of Industrial Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia
ID 402 Emergent Strategy in the COVID-19 Situation: A Case Study of Tatuis
Ari Nugraheni, Aziati Ridha Khairi, Trisha Amanda, and I Made Ivan Surya Sanjaya, Industrial Engineering Department, Faculty of Engineering
Universitas Indonesia, Kampus UI, Depok, 16424, Indonesia
Chandrika N Hendrawan, Muhammad Y Salam, Riri Fitriana, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Webster Mthulisi Mncube. Khathutshelo Mushavhanamadi, Department of Quality and Operation Management, University of Johannesburg, South Africa
Mahaboob Sheriff K M (1) and Laoucine Kerbache (1,2)
(1) Division of Engineering Management and Decision Sciences, College of Science and Engineering, Hamad Bin Khalifa University, Education City, Qatar Foundation, P.O. Box. 34110. Doha, Qatar.
(2) HEC Paris, Qatar.
Wirawan Pratama Suwardi, T C Kusuma, Bagas Muhamad Kartiko, Department of Industrial Engineering, Faculty of Engineering
Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Annisa Khairani, Asrie Permata D. and Lailatul Fadhilla R., Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia
Depok, 16424, Indonesia
Davis Belmiro, Gandi Bintang, and Sandi Bakti, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Indonesia
Ademas Muhammad Danisworo, M. Fauzan, Yosi Carolina, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Fahmi Ramadhan Putra, Rizki Abdillah, Kartika Trisna Putri, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
ID 417 Inter-firm Collaboration in the Forest Products Industry: A Literature Review
Mehrasa Eskandari, Nadia Lehoux, and Caroline Cloutier, Department of Mechanical Engineering, Université Laval, 1065 avenue de la Médecine, Québec, QC Canada
ID 421 Strategic Analysis of a General Insurance Company in Indonesia
Azam Ibrahim Ghufran, Desi Triyana, and Fajar Prana, Departemen Teknik Industri, Fakultas Teknik, Universitas Indonesia, Depok, Indonesia
Hanoum Salsabila, Mutia Perwita Sari, Wendy Febrianty Mardhiyah, Raisha Dinita, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424
Susana Duarte, Maria do Rosário Cabrita, V. Cruz-Machado, UNIDEMI, Department of Mechanical and Industrial Engineering,
NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
Ajun Tri Setyoko, Ayu Erliza, Michael Alfonsus L. Suryo S., Daniel Sheldy Sucipto, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
ID 425 Facility Layout Design Tools Comparison: A Case Study of a SME in Electronic Industry
Marlene Brás, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal
Ana Moura, Department of Economics, Management, Industrial Engineering and Tourism, GOVCOPP – Systems for Decision Support Research Group, University of Aveiro, Aveiro, Portugal
Mohale Mofokeng and Thabiso Mokoena, Department of Quality and Operations Management, Faculty of Engineering & The Built Environment, University of Johannesburg, Doornfontein, Johannesburg, South Africa
ID 428 Decision support system for production planning in tyre balancing machines
Francisco Reis, Department of Mechanical Engineering, School of Engineering, Polytechnic of Porto, Porto, Portugal
António G. Ramos, Department of Mechanical Engineering, INESC TEC and CIDEM, School of Engineering, Polytechnic of Porto, Porto, Portugal
ID 429 Analysis for Cost Leadership Strategy and Core Competitiveness Points of Air Asia
Arya Ibrahim Aji, Kynanda Ivandi Ramadhan, Lutfie Hidayatullah Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia
Kampus UI Depok, Depok 16424
Zharalin Suryaputri, Indesta Aulia Hendra P, Adhyka Wijaya, I Ketut Sathya Ananda S., Industrial Engineering Department, Indonesia University, Depok, Indonesia
Maya Sukmawati1, Tsany Naufal H.2, Clara Puspita N.3, Industrial Engineering Department, Universitas Indonesia Kampus UI Depok, Jakarta, Indonesia
Gerald Giovanni Raditya Gita, Mutiara, Maraya Ghassani Santoso, Early Lula Afif, Industrial Engineering Department, Universitas Indonesia
Depok, Indonesia
Andi Maulana, Zulfaa Irbah Zain, and Yafiazmi Dhaniswara, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Thanh Vu Ngoc and Huong Tran Thi, School of Economics and Management, Hanoi University of Science and Technology, Hanoi, Vietnam
ID 438 Design for Additive Manufacturing of a horizontal axis wind turbine
Simone Cantarelli, Daniela Francia, Alfredo Liverani, Leonardo Frizziero, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Bologna, v.le Risorgimento, 2 – 40136, Italy
Tsepo.M. Dube; Andre F van der Merwe and Stephen Matope, Department of Industrial Engineering, University of Stellenbosch, South Africa
Hertzog Bissett, Research and Development, South African Nuclear Energy Corporation, South Africa
Andy Kresna, Diaddra Pramudito, and Naldo Badriansyah, Departemen Teknik Industri, Fakultas Teknik, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
ID 442 Adaptive Damping Control using RFID: Design & Optimization
Yassir ROUCHDI and Khalid EL Yassini, IA Laboratory, Moulay Ismail University Meknes, Kenza OUFASKA, TIC Lab, International University of Rabat, Rabat, Morocco
ID 443 Codification or Personalization? Aid To Choose Your Knowledge Management Strategy
Afaf Jghamou and Aziz Maziri and El Hassan Mallil and Jamal Echaabi, Mechanical Engineering Department, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Casablanca, Morocco
Nathaniel Viandy Dondokambey, Valda Aqila Afranovka, Yola Lista Valentina, and Laras Safitri, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
Ayu Mandasari Nasution, Fery Permadi H, and Yaumil Khairoh, Department of Industrial Engineering, Universitas Indonesia, Kampus UI Depok
Lucas Stracieri, Chemical Engineering Department, University of Waterloo, Waterloo, ON N2L3G1, Canada
Hedia Fgaier, Full Sail University, 3300 University Blvd, Winter Park, FL 32792, United States & Valencia College, Orlando, FL 32811, United States
Ali Elkamel, Chemical Engineering Department, University of Waterloo, Waterloo, ON N2L3G1, Canada
Wildan Firdaus1, Erwin Suryadi Maila2, and Ahmad Septiawan3, Industrial Engineering Department1, 2, Civil and Environmental Engineering Department3, Universitas Indonesia, Depok, Indonesia
ID 451 Blockchain for Agri-Food Supply Chain Traceability
Rafael Granillo-Macías and Isidro J. González-Hernández, Universidad Autonoma del Estado de Hidalgo, Campus Sahagún, Tepeapulco, Hidalgo, México
Elias Olivares-Benitez, Facultad de Ingenieria, Universidad Panamericana, Zapopan, Mexico
Santiago Cedillo, LIDI, Computer Science Engineering School, Universidad del Azuay, Cuenca, Ecuador
Catalina Astudillo-Rodriguez, LIDI, Computer Science Engineering School, Universidad del Azuay, Cuenca, Ecuador
Priscila Verdugo-Cardenas, LIDI, Business Administration Faculty, Universidad del Azuay, Cuenca, Ecuador
Jaqueline Verdugo-Cardenas, LIDI, Business Administration Faculty, Universidad del Azuay, Cuenca, Ecuador
ID 454 Framework Design on Health Care System Resilience: A Fuzzy AHP Approach
Giselle Joy Esmeria, Mary Jean Azuela, Dennis Paul Orge and Mary Grace Valdez, Industrial Engineering Department, De La Salle University, Manila, Philippines
Sita Nurlailly, Department of Industrial Engineering, Universitas Indonesia, Indonesia.
Lutfiani, Department of Industrial Engineering, Universitas Indonesia, Indonesia
Alif Faridalthaf, Department of Industrial Engineering, Universitas Indonesia, Indonesia
ID 457 Examining the Readiness to Adopt the Internet of Things and Big Data in Egyptian Companies
Hams Abd El-Hamed, College of Management and Technology, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
Sara El-Zarka, International Transport and Logistics Institute, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
Sahar El-Barky, College of International Transport and Logistics, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
ID 458 Inventory Management Sourcing Policy Selection: A Focus on Wastewater Infrastructure
Mohommed Maharoof and Dr. Laoucine Kerbache, Engineering Management & Decision Sciences, College of Science and Engineering
Hamad Bin Khalifa University (HBKU), Education City, Qatar
ID 459 Do Pandemic Related Datasets with High Artificial Control Still Follow the Benford’s Law?
Kalpani Dissanayake, Assistant Professor, Department of Business and Economics, Pennsylvania State University, 25 Yearsley Mill Rd., Media, PA 19063 USA
Jay Daniel, Program Leader, MSc Global Operations and Supply Chain Management, Derby Business School, University of Derby, Kedleston Rd, Derby DE22 1GB, UK
ID 460 Impact of Aircraft Model and Delay Duration on the Air Traffic Flow Management
Abdelhamid Boujarif, Industrial Engineering Laboratory, Paris-Saclay University, CentraleSupélec , 91190, Gif-sur-Yvette, France
Sadeque Hamdan, College of Business and Economics, UAE University, Al Ain, United Arab Emirates
Oualid Jouini, Industrial Engineering Laboratory, Paris-Saclay University, CentraleSupélec, 91190, Gif-sur-Yvette, France
ID 464 Human Related Challenges in Lean Implementation: A Case of Sri Lankan Large Scale Contractors
N.M.G. Helamini Sandagomika, Y.G. Sandanayake, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 465 How can Corporate Performance keeps in Multinational Firm: a Study from Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Wilson Rajagukguk, Department of Management Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta, Indonesia
ID 466 Maintaining Brand Equity of Business Strategy in Multinational Firm: Fact from Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Gidion P. Adirinekso, Department of Management Faculty Economics and Business Universitas Kristen Krida Wacana, Jakarta, 11470 Indonesia
ID 468 Economic Development and Mobile Cellular Subscription
Wilson Rajagukguk, Faculty of Economics and Business, Universitas Kristen Indonesia, Jakarta 13630, Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
ID 469 The Role Of Regulatory Resilience In Supply Chain Optimization: A Case Study
Saloua SAID and Hafida BOULOIZ, Systems engineering and decision support laboratory, ENSA, Agadir, Morocco
Maryam GALLAB, MIS – LISTD Laboratory, Department of Computer Science, ENSMR, Rabat, Morocco
Mudjanarko, SW and Bahaswan, R., Departement of Civil Engineering , Narotama University, Surabaya, 60117, INDONESIA
Nawir Rasidi, Departement of Civil Engineering, Polinema Negeri Malang, Malang, 65141, INDONESIA
Achfas Zacoeb, Departement of Civil Engineering, Brawijaya University, Malang, 65141, INDONESIA
Ramadhansyah Putra Jaya, Departement of Civil Engineering, Universiti Malaysia Pahang, Malaysia
Mohd Haziman Wan Ibrahim, Department Jabatan Kejuruteraan Awam, Universiti Tun Hussein Onn Malaysia, Malaysia
Mohd Fadzil Bin Arshad, Departement of Civil Engineering, Universiti Teknologi MARA, Malaysia
Firdaus Pratama Wiwoho, Departement of Environmental Engineering, Institut Teknologi Sepuluh Nopember, Surabaya,60117, INDONESIA
ID 472 Opportunity for Hotel Business during the COVID-19 Pandemic: A Case Study from Bengkulu City
Rajiv Dharma Mangruwa, Azman Hashim International Business School; Faculty Communication and Business, University Teknologi Malaysia
Telkom University Indonesia, Kuala Lumpur, Malaysia; Bandung, Indonesia
Akbariah M. Mahdzir, Malaysia Japan International Institute of Technology, University Teknologi Malaysia, Kuala Lumpur, Malaysia
Nur Naha Abu Mansor, Azman Hashim International Business School, University Teknologi Malaysia, Kuala Lumpur, Malaysia
Trust Mahove and Stephen Matope, Industrial Engineering Department, Stellenbosch University
ID 474 An Examination of Emotional Intelligence in UAE Projects
Abdulrahman Azzam Othman, Udechukwu Ojiako and Fikri T. Dweiri, Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, United Arab Emirates
ID 475 A Secure Middleware Architecture for Real-time Tracking Applications
Achraf Haibi1,2, Kenza Oufaska2, Khalid El Yassini1, Mohammed Boulmalf2,
1 IA Laboratory, Faculty of Sciences, Moulay Ismail University, Meknes, Morocco
2 TICLab Laboratory, College of Engineering & Architecture, International University of Rabat, Morocco
Rafiu Dimeji Seidu, Bert Ediale Young, Joseph Kangwa, John Obas Ebohon, and Olubisi Ige, School of the Built Environment and Architecture, London South Bank University, 103 Borough Road, London, SE1 0AA, UK
ID 480 Colombia Life Expectancy and War 1985-2018
Mariluz Osorio Quiceno, Facultad de Ingeniería, Universidad Distrital “Francisco José de Caldas”, Bogotá, Colombia
Wilson Alexander Pinzón Rueda, Facultad Tecnológica, Universidad Distrital “Francisco José de Caldas”, Bogotá, Colombia
Carlos Andrés Arango Londoño, Departamento de Ingenieria Industrial, Universidad de La Salle, Bogotá, Colombia
Edgar Olmedo Cruz Mican, Administración de Empresas AEMD, Corporación Universitaria Minuto de Dios, Bogotá, Colombia
ID 481 Financial Services Request Evolution
Carlos Andrés Arango Londoño, Departamento de Ingenieria Industrial, Universidad de La Salle, Bogotá, Colombia
Wilson Alexander Pinzón Rueda, Facultad Tecnológica, Universidad Distrital “Francisco José de Caldas,” Bogotá D.C, Colombia
Carlos Alberto León Gil, Industrial Engineer, La Salle University, Bogotá D.C, Colombia
Diego Karachas Rodriguez, Facultad de Ciencias Empresariales, Corporacion Universitaria Minuto de Dios, Bogotá, Colombia
Jose Martin Diaz, Facultad de Ciencias Empresariales, Corporacion Universitaria Minuto de Dios, Bogotá, Colombia
Fernando Augusto Poveda Aguja, Maestría en Educación, Corporación Universitaria Minuto de Dios UNIMINUTO
ID 482 Road Accident Rate Bogotá, Colombia, 2015- 2019
Diego Karachas Rodriguez, Facultad de Ciencias Empresariales, Corporacion Universitaria Minuto de Dios, Bogotá, Colombia
Wilson Alexander Pinzón Rueda , Facultad Tecnológica, Universidad Distrital “Francisco José de Caldas, Bogotá, Colombia
Carlos Andrés Arango Londoño, Departamento de Ingenieria Industrial, Universidad de La Salle , Bogotá, Colombia
Jose Martin Diaz, Facultad de Ciencias Empresariales, Corporacion Universitaria Minuto de Dios, Bogotá, Colombia
Fernando Augusto Poveda Aguja, Maestría en Educación , Corporación Universitaria Minuto de Dios UNIMINUTO,
Fidel Andrés Olarte Bustos, RealData S.A.S., Bogotá D.C. Colombia
ID 494 National Homicide Police Database, Colombia 2010-2020
Mariluz Osorio Quiceno, Facultad de Ingeniería, Universidad Distrital “Francisco José de Caldas”, Bogotá, Colombia
Wilson Alexander Pinzón Rueda, Facultad Tecnológica, Universidad Distrital “Francisco José de Caldas”, Bogotá, Colombia
Edgar Olmedo Cruz Mican, Administración de Empresas AEMD, Corporación Universitaria Minuto de Dios , Bogotá, Colombia
Fidel Andrés Olarte Bustos, RealData S.A.S., Bogotá D.C. Colombia
Ricardo Mancera Pardo, RealData S.A.S., Bogotá D.C. Colombia
Rony Edson Sánchez Calderón, RealData S.A.S., Bogotá, Colombia
ID 496 A New Energy Efficient Mechanism to Enhance MPR Selection in OLSR: EEM-OLSR
Safaa Laqtib and Khalid El Yassini, Informatics and Applications Laboratory (IA), Department of Mathematics and Computer Science, Faculty of Sciences, Moulay Ismail University, Meknes, Morocco.
Kenza Oufaska, TICLAB, International University of Rabat, Rabat, Morocco.
Moulay Lahcen Hasnaoui, Research Team: ISIC ESTM, L2MI Laboratory, ENSAM Moulay-Ismail University, Meknes, Morocco.
ID 497 Ergonomic Design of a Computer Workstation for Preschool Students Studying at Home
Karylle E. Famero, Jared Z. Paguia and Maui T. Yumul, Young Innovators Research Center, Mapúa University – Makati, Makati, Metro Manila, Philippines
Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines
ID 498 Ergonomic Design of Computer Workstations of High School Students Studying at Home
Ryan Gabriel D. Cadiz and Castro James J. Guerrero, Young Innovators Research Center, Mapúa University, Intramuros, Manila 1002, Philippines
Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines
ID 500 Simple and Capacitated Plant Location Problem: Forward and Reverse Logistics
RRK Sharma, Department of IME IIT Kanpur 208016 India
Vinay Singh, ABV-IIITM Gwalior-474015, India
Najam Ul Zia, Felicita Chromjaková, and Ledislav Burita, Faculty of Management and Economics, Department of Industrial Engineering and Information Systems, Tomas Bata University in Zlin, Czech Republic
ID 505 Energy-related COVID-19 Studies – A Bibliometric Analysis with Literature Review
Jude James, National Centre for Technology Management (NACETEM), Ile-Ife, Osun State, Nigeria, Industrial Engineering Department, Durban University of Technology, South Africa, Institute of Systems Science, Durban University of Technology, South Africa
Victor Ebin, Voegs Integrated Resources Limited, A41 Adisa Estate, Gudu, Abuja, Nigeria
Abubakar Kazeem, National Centre for Technology Management (NACETEM), Ile-Ife, Osun State, Nigeria
Emeka Joseph Pius, National Centre for Technology Management (NACETEM), Ile-Ife, Osun State, Nigeria
ID 506 Effects of Computer-Based Work on the Musculoskeletal Discomfort among College Students
Maria Angelica D. Bare, Francee Mae F. Castro, Jhon Lawrence G. Quimio and Ma. Janice J. Gumasing, School of Industrial and Engineering Management, Mapúa University, Intramuros, Manila
Deceree Anne A. Haboy, Kirstien Paola E. Robas, Matthew P. Solivio and Ma. Janice J. Gumasing, School of Industrial Engineering and, Engineering Management, Mapua University, Intramuros, Manila, Philippines
Maryam G. Irenea, Frankern Luis S. Malabuyoc Ma. Daniella M. Sobrevilla, Madeline Anne Patrice C. Sy and Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
ID 509 Relationship of Work Posture During WFH Setup on Musculoskeletal Discomfort of Students
Jerome Liwanag, Wajid Mariño, Anthony Sanchez and Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
Angelo Luis S. Doctora, William Davin D. Perez, Abigail B. Vasquez, and Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
Lorenzo T. Caday, Krisanta Ana E. Draculan, Kianna Denise C. Villapando and Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
ID 519 Fleet Replacement Analysis by Equivalent Uniform Annual Cost Method
Malek Almobarek, Department of Design, Manufacturing, and Engineering Management, Faculty of Engineering, University of Strathclyde, Glasgow, UK
Sasikumar Perumal, Faculty, Department of Industrial Engineering Technology, Higher Colleges of Technology, Abu Dhabi, United Arab Emirates
Fatima Muhayer Abdulla Saeed Alketbi, Student, Department of Industrial Engineering Technology, Higher Colleges of Technology, Abu Dhabi, United Arab Emirates
Hour Ali Mubarak Najem Aljneibi , Student, Department of Industrial Engineering Technology, Higher Colleges of Technology, Abu Dhabi, United Arab Emirates
Patrich Ferretti, Christian Leon-Cardenas, Merve Sali, Gian Maria Santi, Francesco Gianese, Giampiero Donnici, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Viale Risorgimento, 2 – 40136, Bologna, Italy
ID 523 Decarbonising supply chain operations
Jay Daniel, Program Leader, MSc Global Operations and Supply Chain Management, Derby Business School, University of Derby, Kedleston Rd, Derby DE22 1GB, UK
Kalpani Dissanayake, Assistant Professor, Department of Business and Economics, Pennsylvania State University, 25 Yearsley Mill Rd., Media, PA 19063 USA
ID 524 How to Improve Data Quality in Supply Chain? A Literature Survey
Jay Daniel, Program Leader, MSc Global Operations and Supply Chain Management, Derby Business School, University of Derby, Kedleston Rd, Derby DE22 1GB, UK
Drew Stapleton, Professor of Supply Chain Management, Mechanical and Industrial Engineering Department, University of Wisconsin La Crosse, 1725 State Street La Crosse, WI 54601, USA
Saqib Anwar, Ateekh Ur Rehman, Yusuf Usmani, Ali M. Al-Samhan, Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
Ateekh Ur Rehman1, Yusuf S Usmani1, N. Kishore Babu2, M.K. Talari2, Hisham Al-khalifa3
1 Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh-11421, Saudi Arabia.
2 Department of Metallurgical and Materials Engineering, National Institute of Technology, Warangal-8 506004, India.
3 Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia
Laura Silverman, Rachel Kristian, Angeliki Dimopulos, and Katie Cyster, Department of Electrical & Computer Engineering Lawrence Technological University. Southfield, MI 48075, USA
George Pappas, Department of Electrical, Computer Engineering and Embedded Software Engineering, Lawrence Technological University Southfield, MI 48075, USA
ID 533 EMV& Biometric for Secure Online Purchases
Youness Ridani SEDCO Technologies Ifrane Fes-Meknes Region Morocco
ID 534 An Application of Data-Driven Analysis in Road Tunnels Monitoring
Rossana Coccia, Alessandro Corsini, Fabrizio Bonacina, and Mara Lombardi, Department of Mechanical and Aerospace Engineering –DIMA-Sapienza University of Rome, Via Eudossiana, 18 – 00184 Roma, ITALY
Lorenzo Ricciardi Celsi, Elis innovation Hub, Via Sandro Sandri, 81 – 00159 – Roma
Natale Marco Pellicanò, Novella Zangheri, and Nicola Savini, AUTOSTRADE PER L’ITALIA SPA – 50, Via Alberto Bergamini, Roma, Italy
Fabio Santucci, Samuel Salini, and Marzia Malavisi, Movyon (Autostrade Tech), Via A. Bergamini 50- 00159 Roma, Italy
Azadeh Maroufmashat, Michael Fowler, and Ali Elkamel, Chemical Engineering Department, University of Waterloo, Ontario, Canada
ID 537 Perceived Effect of Factors on Workers’ Task Performance in a Cold Storage Warehouse Facility
Cynthara B. Leonardo and Marvin I. Noroña, School of Industrial Engineering and Service Engineering Management, Mapúa University, Intramuros, 1002 Metro Manila, Philippines
ID 539 Modular Construction of COVID-19 Hospital
Mustafa Salsal Yousif Al-Ani, Undergraduate student, Department of Civil Engineering, British Applied College, Umm Al Quwain, UAE
Saleema Panda, Assistant Professor, Department of Civil Engineering, British Applied College, Umm Al Quwain, UAE
ID 540 Semi-automated Assembly Process Using Arm Manipulator
Ikrom Kambarov b, Abror Hoshimov a,b, Jamshid Inoyatkhodjaev b, Anna C. Cagliano a
a Department of Management and Production Engineering Department, Politecnico di Torino Corso Duca Degli Abruzzi 24, 10129 – Torino – Italy
b Department of Mechanical and Aerospace Engineering Turin Polytechnic University in Tashkent, Kichik khalka yuli st.17, Tashkent – Uzbekistan
Abebayehu Abdela, Ethiopia Institute of Technology-Mekelle, School of Mechanical and Industrial Engineering, Student at KU Leuven, Engineering Technology program, Belgium
Bart Buffel and Frederik Desplentere, Department of Materials Engineering, ProPoLiS research group, KU Leuven Bruges Campus, Bruges, Belgium
ID 550 Evaluation of Sales and Operations Planning Process Using Maturity Models-Case Study
Oumaima Hansali, Samah Elrhanimi, Laila El Abbadi, Laboratory of Engineering Sciences, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
ID 551 TAM and Game-based Learning Platform for Online Education in Schools
Enggal Sriwardiningsih, Management Department, Business School-Undergraduate, Bina Nusantara University, Jakarta, Indonesia
ID 552 Global Brand influences Brand Awareness, Intention, and impacts on Hotel Service Purchases
Enggal Sriwardiningsih, Management Department, Business School-Undergraduate, Bina Nusantara University, Jakarta, Indonesia
Arif Zulkarnain, Hotel Management Department Faculty of Economics and Communication,
Leonardo Frizziero, Alfredo Liverani, Gian Maria Santi, Paola Papaleo, Francesca Napolitano and Curzio Pagliari, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Bologna, Italy
Giovanni Trisolino, Giovanni Luigi Di Gennaro, and Paola Zarantonello, IRCSS – IOR—Rizzoli Orthopaedic Institute, Pediatric Orthopaedics and Traumatology, Bologna 40136 Italy
ID 554 The Use of Lean Six Sigma Tools in a South African Multinational Organization
Bheki Makhanya and Hannelie Nel, Department of Engineering Management, University of Johannesburg, Johannesburg, South Africa
ID 556 Sustainable Echo Absorption Material with Recycled Plastic
Komalpreet Kaur Takhar, Undergraduate student, Department of Civil Engineering,, British Applied College, Umm Al Quwain, UAE
Dr. Saleema Panda, Assistant Professor, Department of Civil Engineering,, British Applied College, Umm Al Quwain, UAE
ID 557 A Math-Heuristic Approach for a Vehicle Routing Problem
Utku Yavuz, Mehmet Can Aydın, Alp Orhan Özver, Yarkın Akçıl, Aslı Erol, Çağla Deniz Özmen, Buse Küçükbükücü, Faculty of Engineering, Industrial Engineering Department, Özyeğin University, Çekmeköy / Istanbul, 34794, TR
Matthew Lam, Aidan O’Gorman, Ryan Schleehahn, and Ali Elkamel, University of Waterloo, Waterloo, ON N2L 3G1, Canada
ID 562 Optimization of consumable consumption in hypermarkets during the Coronavirus pandemic period
Kamilia Filali, Systems Engineering Laboratory, Sultan Moulay Slimane University, Av Med 5, Po Box 591, Pc 23000, Beni Mellal, Morocco
Zoubida Benmamoun, GS laboratory ENSA, University campus PO Box, Kenitra, morocco
Hanaa Hachimi, Systems Engineering Laboratory, Sultan Moulay Slimane University, Av Med 5, Po Box 591, Pc 23000, Beni Mellal, Morocco
ID 563 Digitizing Trade Finance Using Blockchain Technology Illustration of Letter of Credit Process
Munaf Asad Khalil, College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar
Laoucine Kerbache, Engineering Management and Decision Sciences, College of Science and Engineering, Hamad Bin Khalifa University, and HEC Paris in Qatar, Doha, Qatar
Adel El Omri, Engineering Management and Decision Sciences, College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar
ID 564 Dimensional Accuracy Prediction for Shape Memory Polymer Using Artificial Neural Networks
Carlos A. Garcia Rosales, Department of Electrical and Computer Engineering, The University of Texas at El Paso, TX 79902, USA
Md Fashiar Rahman, Honglun Xu, Computational Science Program, The University of Texas at El Paso, TX 79902, USA
Tzu-Liang (Bill) Tseng, Department of Industrial, Manufacturing and Systems Engineering, The University of Texas at El Paso, TX 79902, USA
Romalyn L. Galingan, Technological Institute of the Philippines; Pamantasan ng Lungsod ng Marikina, Cubao, Quezon City, Philippines; SSS Village, Marikina City Philippines
Erico M. Habijan, Pamantasan ng Lungsod ng Marikina, SSS Village, Marikina City Philippines
Mohamed Gamal, Production Engineering Department, Faculty of Engineering, Nahda University, Beni-Suef 62521, Egypt
Ahmed Donkol, Electrical Engineering Department, Faculty of Engineering, Nahda University, Beni-Suef 62521, Egypt
Ahmed Shaban , Mechanical Engineering Department, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt
Francesco Costantino, Giulio Di Gravio and Riccardo Patriarca, Mechanical and Aerospace Engineering Department, Sapienza University of Rome, Via Eudossiana, 18, 00184 Rome, Italy
ID 575 Firm’s sustainable Performance: Available Tools and Proposal of a New Module
HADDACH Abdelhay, Abdelmalek Essaâdi University, Faculty of Sciences and Techniques, Tangier, Morocco., Research team: Materials, Environment and Sustainable Development
ID 584 Supply Chain Risks: A Review Study
Mounia Hafiani, Engineering sciences laboratory, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
Mariam Maslouhi, Engineering sciences laboratory, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
Laila El Abbadi, Engineering sciences laboratory, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
ID 585 Availability analysis of a two-component parallel system under stochastic dependence
Ziyad BAHOU, MOAD6, Mohammadia School of Engineers, Mohammed V University, Rabat, Morocco
Nizar ELHACHEMI, MOAD6, Mohammadia School of Engineers, Mohammed V University, Rabat, Morocco
Najiba SBIHI, MOAD6, Mohammadia School of Engineers, Mohammed V University, Rabat, Morocco
Abdessamad Ait El Cadi, LAMIH, Université Polytechnique Haut-de-France, Valenciennes, France
Issam KRIMI, LAMIH, BEAR Lab, International University of Rabat, Rabat Business School, Rabat, Morocco
ID 588 Solution of E-Government Problems with Technology Acceptance Model Approach
Inayatulloh, Information System Department, School of Information System, Bina Nusantara University, Jakarta, Indonesia
ID 590 Integrated E-Government Model with Cloud Computing Technology
Inayatulloh and Maryani, Information System Department, School of Information System, Bina Nusantara University, Jakarta, Indonesia
Kawtar RETMI, Institute of Biological Sciences, ISSB-P, Mohamed VI Polytechnic University (UM6P), 43 150 Benguerir, Morocco
Fatima OUZAYD, Smart System Laboratory (SSLab), ENSIAS Mohamed V University Rabat, Morocco
Manal Tamir, Advanced Digital Enterprise Modeling and Information Retrieval Laboratory, Rabat IT Center, ENSIAS, University Mohamed V, Rabat, Morocco
ID 600 Line Start Permanent Magnet Synchronous Motor for Underground Mining Drive Application
Dinh, Bui Minh, Quyet, and Dinh Xuan, Department of Electrical Machnies and Drives, Hanoi University of Science and Technology, Hanoi, Vietnam
ID 601 Evaluating Factors of Profitability for Improvement at PT. Padumacom Karya Jaya
Anna Gracia and Bachtiar H. Simamora, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta Barat, 11530, Indonesia
Lily Leonita, Management Department, BINUS Online Learning, Bina Nusantara University, Jakarta Barat, 11480, Indonesia
ID 602 Influence of Stator/Rotor Poles Switched Reluctance Motor Performces
Dinh, Bui Minh1, Department of Electrical Machnies and Drives, Hanoi University of Science and Technology, No1, Dai Co Viet Street, Hai Ba Trung, Hanoi., Vietnam
ID 610 Automatic Integration of CAFM and ERP System using Application Programming Interface (API)
Shiela B. Duquez, School of Industrial and Engineering Management, Mapúa University, Grace Lorraine D. Intal, School of Information Technology, Mapua University,
Jan Erica D.C. Aquino, Karlo Gabbriel D. Batto, Bonifacio A. De Jesus Iv, Aiden Lemuel T. Lumibao, Lex Marco Paolo A. Miranda, Mikka Rosella C. Villarica and Grace Lorraine D. Intal, School of Information Technology, Mapua University
ROBIMARL B. TORRES, School of Industrial Engineering and Engineering Management Mapúa University 658 Muralla St., Intramuros, Manila 1002, Philippines
MARVIS B. HALILI, School of Industrial Engineering and Engineering Management Mapúa University 658 Muralla St., Intramuros, Manila 1002, hilippines
DONILYN D. SALAZAR, School of Industrial Engineering and Engineering Management Mapúa University 658 Muralla St., Intramuros, Manila 1002, Philippines
GRACE LORRAINE D. INTAL, School of Information Technology, Mapúa University 658 Muralla St., Intramuros, Manila 1002, Philippines
Rolando Chavez and Lino Quispe, Department of Systems Engineering, San Luis Gonzaga University, Ica, 11000, Peru
Mario Chauca, Engineering Faculty, Universidad Nacional Tecnológica de Lima Sur, Villa EL Salvador, 15834, Peru
ID 615 Improving the Packaging Unit at AEC
Abdulaziz Alsalamah, Abdullah Alnooh, Nawaf Alsalman, and Abdulaziz Alhammadi, Department of Industrial Engineering, College Engineering,
Alfaisal University, Riyadh 11533, KSA
Sobhi Mejjaouli, Industrial Engineering Department, Alfaisal University, Riyadh, Saudi Arabia
Siti Nurul Suhada Rosle, Malaysia Institute of Transport, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia
Siti Ayu Jalil, Malaysia Institute of Transport, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia
Faculty of Business and Management, Universiti Teknologi MARA Puncak Alam Campus, 42300 Puncak Alam, Selangor, Malaysia.
ID 617 An Analysis of the Impact of Culture on McDonald’s Consumer Behaviour in Indonesia
Arlenea Halyda Herdimansyah, Undergraduate Program, School of Business and Management, Bandung Institute of Technology, BA International Business, University of Hull
ID 619 Analysis of the Adoption of Globalgap Certification in Pakistan
Muhammad Bilal Irshad, Maimunah Ali and Muhammad Imran, Faculty of Technology Management & Business, Universiti Tun Hussein Onn Malaysia, 86400, Parit Raja Johor, Malaysia
Amjad Masood, Department of Business Studies, Bahria Business School, Islamabad Campus, Bahria University, Islamabad, Pakistan
Kalsoom Akhtar, Department of Tourism and Hospitality Management, Institute of Business, Management and Administrative Sciences, The Islamia University of Bahawalpur, Punjab, Pakistan
Devina Shabrina Amelza, Undergraduate Program, School of Business and Management, Bandung Institute of Technology, BA Business Management, University of Hull
Mohammad Alifasya Atalario, Undergraduate Program, School of Business and Management, Bandung Institute of Technology, BA International Business, University of Hull
ID 624 Demand Forecasting with Real Case Analysis for Effective Retail Decision-Making
Dua Weraikat, Safika Thasin, Caroline Zeidan, Mohammed Ishtiaq, Dr. Adolf Acquaye, Mechanical and Industrial Engineering Department,
Rochester Institute of Technology, RIT Dubai, Silicon Oasis, Dubai, UAE
Kianna Denise C. Villapando, Alliah Jane S. Agunos, Anthony A. Sanchez, Leanne Dominique B. Loto, Rianina D. Borres, Department of Industrial Engineering and Engineering Management, Mapúa University,Manila, Philippines
Queen Francisca M. Sablada and Riañina D. Borres, School of Industrial Engineering and Engineering Management, School of Graduate Studies, Mapua University, Manila, Philippines
Adrien ILumbe Laby, Subisiso Shabalala, Boitwarelo Molokwane & Juanita Vander Walt, Department of Transport and Supply Chain Management, University of Johannesburg, Randburg Gauteng, South Africa
ID 630 Deadlock and Collision Prevention Algorithms for Mobile Robots in Automated Warehouses
Ecem Eroglu Turhanlar and Banu Yetkin Ekren, Department of Industrial Engineering, Yasar University, Izmir, Turkey
ID 631 Supply Chain Management in Airline Catering Service: Characteristics, Challenges and Trends
Dhaarsan Rajaratnam and Funlade Sunmola, School of Physics, Engineering and Computer Science, University of Hertfordshire, Hatfield, UK
ID 632 Concentrated Phosphate Slurry Flow Simulations Using OpenFoam
Souhail Maazioui, Equipe Analyse des systèmes hydrauliques (EASH), Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Laboratoire Analyse, Géométrie et Applications (LAGA), Université Sorbonne Paris Nord, Villetaneuse, France
Modeling Simulation & Data Analysis (MSDA), Mohammed VI Polytechnic University Benguerir, Morocco,
Imad Kissami, Modeling Simulation & Data Analysis (MSDA), Mohammed VI Polytechnic University Benguerir, Morocco
Fayssal Benkhaldoun, Laboratoire Analyse, Géométrie et Applications (LAGA), Université Sorbonne Paris Nord, Villetaneuse, France
Abderrahim Maazouz, IMP, Université de Lyon, INSA Lyon, Ingénierie des Matériaux Polymères, Villeurbanne, France
Driss Ouazar, Equipe Analyse des systèmes hydrauliques (EASH), Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Nicole Louise Josue and Rianina D. Borres Charlene, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines
Charlene Marjorie P. Yapo and Kyla Jhoanna B. Canlas, School of Civil, Environmental, and Geological Engineering, Mapua University, Manila, Philippines
Kirstien Paola E. Robas, Matthew P. Solivio, Deceree Anne A. Haboy, Christine Angelie Y. Taw, Rianina D. Borres, Department of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines
Maryam G. Irenea, Frankern Luis S. Malabuyoc, Ma. Daniella M. Sobrevilla, Madeline Anne Patrice C. Sy, Rianina D. Borres, Department of Industrial Engineering and Engineering Management, Mapúa University, Intramuros, Manila, Philippines
Angelo Luis S. Doctora, William Davin D. Perez, Franco Neil A. Sanchez, Abigail B. Vasquez, Rianina D. Borres, Department of Industrial Engineering and Engineering Mangement, Mapúa University, Manila, Philippines
Julianne Mikhaella Delos Reyes, Louis Miguel Dural, Julia Sofie Mangaoang, and Gaea Marithe Victor, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila 1002, Philippines
James Brylle C. Foz, Martin James Olan, Daniel Nombrado Perez, Ervin Josh Santos, Rianina D. Borres, Department of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines
Christlyn Mae C. Valeriano, Charles Kristian K. Ilo, Maria Kathryne A. Illescas, Daniel John B. Sacramento, and Rianina D. Borres, Mapúa University, Intramuros, Manila, Philippines
Christian Jay Sesnorio, Henrie Louis P. Subido, Carl Louie N. Cruz, Meeco B. Manigbas, Cedric F. Reprado, Rianina D. Borres, School of Industrial and Engineering Management, Mapúa University, Intramuros, Manila, Philippines
D 641 Ergonomic Assessment on Roll-on-roll-off Ship Workers
Troy Joseph D. Lauengco, Adrian M. Carandang, and Rianiña D. Borres, Department of Industrial Engineering and Engineering Management, Mapúa University, Manila 1002, Philippines
Wajid A. Mariño, Krisanta Ana E. Draculan, Jerome L. Liwanag, Lorenzo T. Caday, Rianina D. Borres, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
Frances Mari Louise N. De Guzman, Angelica Allei M. Dilay, and Rianiña D. Borres, School of Industrial Engineering and Engineering Management, Mapua University, 658 Muralla St., Intramuros, Manila
Maria Angelica D. Bare, Francee Mae F. Castro, Jan Aldrin V. Dahilig, Jhon Lawrence G. Quimio, and Rianina D. Borres, School of Industrial and, Engineering Management, Mapúa University, Intramuros, Manila
ID 645 Analysis of Cardinal EDGE Usability Using Different Technological Devices
Shiela B. Duquez, Mary Christy O. Mendoza, Rianina D. Borres, School of Industrial and Engineering Management, Mapúa University, Manila, Philippines
Jamille C. Riguerra and Marvin I. Noroña, School of Industrial Engineering & Engineering Management, Mapúa University, Intramuros, Philippines
Richard Jerome L. Caya, Fritz Gerard B. Hernandez, and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapúa University, 658 Muralla St, Intramuros, Manila, 1002 Metro Manila, Philippines
ID 648 Bread Returns Management in Commercial Plant Bakeries: Case Study
Innocent Muzivi, School of Physics, Engineering, and Computer Science, University of Hertfordshire, Hatfield, Hertfordshire, AL10 9AB, UK,
Funlade T. Sunmola, School of Physics, Engineering, and Computer Science, University of Hertfordshire, Hatfield, Hertfordshire, AL10 9AB, UK
Adrian Paul B. Carandang, Aliana Rose P. Paras, and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, Philippines
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, P.O Box 4026, Jacobs, Durban, South Africa
Francesco Simone, Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana, 18 – 00184 Rome (Italy)
Mojtaba Taghavizad Kolsaraky, Advisor to Deputy of Transportation, Road Maintenance and Transportation Organization, Tehran, Iran
Abbas Mahmoudabadi, Ph.D. in Industrial Engineering, Director of IE Department, MehrAstan University, Gilan, Iran
Budi Rustandi Kartawinata, Business Administration Program Faculty of Communication and Business, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia
Aditya Wardhana, Business Administration Program Faculty of Communication and Business, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia
Aldi Akbar, Politeknik Piksi Ganesha Bandung, Jalan Jend. Gatot Subroto No. 301, Bandung 40274, Indonesia
Ayu Rachmayani Cahya Dewi, Business Administration Program Faculty of Communication and Business, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia
Budi Rustandi Kartawinata, Business Administration Program Faculty of Communication and Business, Telkom University , Jalan Terusan Buah Batu, Bandung 40257, Indonesia
Aldi Akbar, Politeknik Piksi Ganesha Bandung, Jalan Jend. Gatot Subroto No. 301, Bandung 40274, Indonesia
Ghazi Abiyu Winata , Business Administration Program Faculty of Communication and Business, Telkom University , Jalan Terusan Buah Batu, Bandung 40257, Indonesia
R. Susanto Hendiarto, Universitas Widyatama, Jl. Cikutra no 204 A Bandung 40124, Indonesia
ID 670 Ergonomic Design of Computer Workstation for Elementary Students Studying at Home
Michael Dave Bunnao, Christian Gabrielle Horeerat, Jhon Lawrence Nueva, and Josh Reyes, Young Innovators Research Center, Mapúa University, 658 Muralla St. Intramuros, Manila, 1002, Philippines
Ma. Janice J. Gumasing, School of Industrial and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, Philippines
ID 671 Effects of the Physical Work Environments to the Reaction Time of Students
Tatiana F. Fernandez, Cristalyn G. Anog, Korina Kyra C. Canta, Mariah Andrea C. De Gracia, and Menzelaius Craig A. Villanueva, Young Innovators Research Center, Mapúa University, 658 Muralla St. Intramuros, Manila, 1002, Philippines
Ma. Janice J. Gumasing, School of Industrial and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, 1002, Philippines
ID 673 An Integrated Simulation Model for Water Purification and Distribution
Francesco Simone, Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana, 18 – 00184 Rome (Italy)
ID 674 Customer Loyalty Using Customer Lifetime Value (A Case Study of Baby Equipment SMEs)
Lidya Vitasya and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
ID 675 Shopping Center Escalator Maintenance Process Using Business Process Re-engineering Approach
Jihan Shohwatu Darussalam and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Indonesia
ID 676 Shopping Centre Recovery Strategy Formulation using SWOT -MCDM Method
Nadine Mediha and M.Dachyar, Industrial Engineering Departement, Universitas Indonesia, Depok, Indonesia
ID 677 Internet of Things Technology Selection for Palm Oil Mill Maintenance
Humaira Syifa Rizal and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
ID 678 Improvement Banana Warehouse Operation Using Business Process Reengineering
Gidion Cahya Negara and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
ID 679 Tech Startup Digital Business Strategy Using Structural Equation Modeling (SEM)
Adi Kurniawan, and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
Kiia Emerlene Dizon, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines.
Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines
Rosemarie C Pilarta, Marvin I. Noroña, School of Industrial Engineering and Service Engineering Management, Mapúa University, Intramuros, 1002, Philippines
Patricia Nicole Ramos, Maryl Louise B. Enteria, & Marvin I. Norona, School of Industrial Engineering & Service Engineering and Management, Mapúa University, 658 Muralla St, Intramuros, Manila, 1002, Metro Manila
Mikayla Dominique M. Ortega and Renald Redner D. Reveche, and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines
Jericko L. Samson, School of Industrial Engineering and Service Engineering Management, Mapúa University, Intramuros, 1002, Philippines
Lyssa Catherine C. Hipolito and Marvin I. Noroña, School of Industrial Engineering and Service Engineering Management, Mapúa University, Intramuros, 1002, Philippines
ID 697 Smart Actuators: A Review
Shankar N V S Vignan’s Institute of Information Technology India
Taranikanth Kamma, Department of Mechanical Engineering, Vignan’s Institute of Information Technology, Visakhapatnam, AP, 530046, INDIA
B Mahesh Krishna, Department of Mechanical Engineering, Swarnandhra College of Engineering and Technology, Seetharampuram AP, 534275, INDIA
Ch Harish Kumar, Department of Mechanical Engineering, Swarnandhra College of Engineering and Technology, Seetharampuram AP, 534275, INDIA
Burra Shalem, Department of Mechanical Engineering, DNR College of Engineering and Technology, Bhimavaram, AP, 534202, INDIA
Mahinthorn Pothiwan, Faculty of Agricultural Technology, Rajabhat Mahasarakham University, Mueang Maha Sarakham, 44000, Thailand.
Xue-Ming Yuan, Singapore Institute of Manufacturing Technology, Agency for Science, Technology, and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-04, Singapore, 138634.
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, P.O Box 4026, Jacobs, Durban, South Africa
ID 708 Design and Development of a Dual Chambered Interactive Juice Packaging for Children
Chukwumaobi Ndukwe Ibe, Efthimia Pantzartzis, Giovanni Pappalettera and Paolo Ferrari, Department of Civil Engineering and Architecture Sciences, Politecnico di Bari, Bari,70125, Italy
K.I.Ridmika and Menaha Thayaparan, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 710 The Effect of ESG Rating on Credit Rating
Farhan Aulia Rahman, Yunieta Anny Nainggolan, School of Business and Management, Bandung Institute of Technology, Bandung, Indonesia
Alya Salmaa Putri Gunawan, School of Business and Management, Institut Teknologi Bandung / University of Hull, Jl. Ganesa No.10, Lb. Siliwangi, Kecamatan Coblong, Kota Bandung, Jawa Barat 40132, Indonesia
ID 712 Agent-Based Modeling of IoT Electric Meters
Mohammed Basingab, Industrial Engineering Department, King Abdulaziz University, Jeddah, 22252, Saudi Arabia
Hiruni Purna Samarage, Informatics Institute of Technology, Sri Lanka.
Gayashini Ratnayake, Senior Lecturer, Informatics Institute of Technology, Sri Lanka.
Flora Elvistia Firdaus, Alvira Liviani, Firelda Putri Ambaratri, Department of Chemical Engineering, Jayabaya University, Jl Pulomas Selatan Kav 23 Jakarta – 13210 Indonesia
ID 715 Manufacture of Canola-Based Polyols for Commercial Polymers
Flora Elvistia Firdaus, Department of Chemical Engineering, Jayabaya University, Jl.Pulomas Selatan Kav 23, Jakarta Timur- 13210, Indonesia,
Muhammad Dachyar, Department of Industrial Engineering, Universitas Indonesia, Kampus UI Depok – 16424, Indonesia
ID 717 Interest in STEM in Bay Area High School Students
Nicole Serrano, Stanford Online High School, Redwood City, CA 94063
Nguyen Huy Thien Phuc, School of Industrial Engineering and Management, International University, HCMC, Vietnam.
Ha Thi Xuan Chi, School of Industrial Engineering and Management, International University, HCMC, Vietnam
Abdullah AlFaify, Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
Sohanul Ahasan, Fariha Nawshin Zaman and Toukir Ahmed, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi-6204, Bangladesh
Tasya Rahmi Annisa, School of Business and Management, International Business, Bandung Institute of Technology, Jl. Ganesa No. 10, Indonesia
Abdelrahman Abouelrous and Adriana F. Gabor, Department of Applied Mathematics and, Research Center on Digital Supply Chain and Operations Management, Khalifa University, Abu Dhabi, United Arab Emirates
ID 724 Waste Management Value Chain Factor Identification of Household Involvement
Zarins Girts and Geipele Sanda, Riga Technical University, Riga, Latvia
ID 725 Simulation and Game-based Lean Training
Christoph Szedlak, Florian Baarsch, Bert Leyendecker, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
ID 726 Senecio Elegans Population Size and Dispersion
Tanisha Gupta, Stanford University Online High School, Redwood City, CA 94063, USA
Jo Simon Ambata, Jose Gaurana, Dan Jacinto, and Joel De Goma, School of Information Technology Department, Computer Science, Mapúa University, Makati, Philippines
Mario Chauca, Professional School of Mechanic and Electric Engineering, National Technological University of South
Danilo Cáceres2, José Donayre3, Luis Magallanes4, Javier Gutiérrez5 and Justo Cuba, Mechanical and Electric Engineering Faculty, San Luis Gonzaga University2,3,4,5,6 Ica 1S, 11004, Perú
ID 731 A Practical Green Vehicle Routing Solution – A Case in Ho Chi Minh City
Quang Pham Ngoc, School of Industrial Engineering and Management, International University, HCMC, Vietnam, Ha Thi Xuan Chi, School of Industrial Engineering and Management, International University, HCMC, Vietnam, Uyen Ngo Thi Thao, School of Industrial Engineering and Management, International University, HCMC, Vietnam, Nguyen Huy Thien Phuc, School of Industrial Engineering and Management, International University, HCMC, Vietnam, Anh Duong Vo Nhi, School of Industrial Engineering and Management, International University, HCMC, Vietnam
Magaly Sandoval, Carlos Hernández, Instituto de Ingeniería Industrial y Sistemas, Universidad Austral de Chile, Valdivia, Chile
Galo Paiva and Carlos Hernández, Instituto de Ingeniería Industrial y Sistemas, Universidad Austral de Chile, Valdivia, Chile
Adnan and Aiyub Yahya, Faculty of Business and Economics, Universitas Malikussaleh, Blang Pulo, Muara Satu, Aceh Utara, 24355 Aceh, Indonesia.
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, Terengganu, Malaysia
Halim Akbar, Riyandi Praza and Muhammad Authar ND, Faculty of Agriculture, Universitas Malikussaleh, East Reuleut, Muara Batu, 24355 North Aceh Regency, Aceh, Indonesia
Jumadil Saputra Universiti Malaysia Terengganu Malaysia
Irfan Murtadho Yusuf, Retno Sunu Astuti, Kismartini, Faculty of Social and Political Sciences, Universitas Diponegoro, Semarang, Jawa Tengah 50275, Indonesia.
Dedy Afrizal, Sekolah Tinggi Ilmu Ekonomi Tuah Negeri Dumai, Sukajadi, Dumai Kota, Kota Dumai, Riau 28812, Indonesia.
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
Damanhur, Falahuddin, Rani Puspitanigrum, Intan Magfirah, Faculty of Economics and Business, Universitas Malikussaleh, Semarang, Jawa Tengah 50275, Indonesia.
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
ID 745 Building Models to Predict Real Estate List Prices using Ensemble Machine Learning Algorithms
Carlos Hernández, Departamento de Ingeniería Industrial y Sistemas Universidad de La Frontera Temuco, Chile
Ingrid Rosales, Instituto de Ingeniería Industrial y Sistemas, Universidad Austral de Chile, Valdivia, Chile
Mohamed Ebrahim Helal Ebrahim ALZaabi, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia,
Prof. Madya Dr. Azlina Binti md Yassin, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia
ID 748 Comparing the Accuracy of Prediction Models based on Ensemble Machine Learning Schemes
Carlos Hernández, Departamento de Ingeniería Industrial y Sistemas Universidad de La Frontera Temuco, Chile
Álvaro Alvar, Instituto de Ingeniería Industrial y Sistemas, Universidad Austral de Chile, Valdivia, Chile
Elidar Sari and Arif Rahman, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia.
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
Risna Dewi and Teuku Alfiady, Faculty of Social and Political Science, Universitas Malikussaleh, Muara Satu, Aceh Utara, Aceh 24355, Indonesia,
Jumadil Saputra and Zikri Muhammad, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
Y. Yulia, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia,
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
Muhammad Ilham Gunawan and Yunieta Anny Nainggolan, A. School of Business and Management, Management Department, Bandung Institute of Technology, Bandung, 40132, Indonesia
Ahmad Fawaiq Suwanan, Faculty of Economics, Universitas Negeri Malang, Semarang, 65145 Malang, Indonesia,
Mahirah Kamaludin and Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
ID 776 Determining and Evaluating the Pyrolysis of Candlenut Shell as an Alternative Energy Sources
Sulhatun, Muhammad, Suryati, Meriatna and Lukman Hakim, Department of Chemical Engineering, Faculty of Engineering, Universitas Malikussaleh, Muara Batu, Aceh Utara, Aceh, Indonesia
ID 777 Chitosan-Alginat-Aloe Vera Biomembran for Wound Dressing Applications
Suryati, Meriatna, Sulhatun and Puspita Sari, Department of Chemical Engineering, Faculty of Engineering, Universitas Malikussaleh, Muara Batu, Aceh Utara, Aceh, Indonesia
Zerihun Asmelash Samuel, Faculty of Civil and Environmental Engineering, Jimma Institute of Technology, Jimma University, Jimma, Ethiopia
ID 784 Efficient Optimization Model for Buffer Size Problem in Production Line with Rework Path
Hisham Alkhalefah, Mustufa Haider Abidi and Usama Umer, Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia,
Ahmed Elkaseer, Department of Production Engineering and Mechanical Design, Faculty of Engineering, Port Said University, Port Fuad 42526, Egypt, Institute for Automation and Applied Informatics, Karlsruhe Institute of Technology,76344 Karlsruhe, Germany
Widayani Wahyuningtyas, Department of Nutrition, Faculty of Health Sciences, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia,
Zackharia Rialmi, Department of Management, Faculty of Business and Economics, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia,
Condrowati, Department of Physiotherapy, Faculty of Health Sciences, Universitas Pembangunan Nasional Veteran Jakarta, Depok, Daerah Khusus Ibukota Jakarta 12450, Indonesia,
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia
Jamaluddin, Marlia Sastro, Ramziati, Faculty of Law, Universitas Malikussaleh, Muara Satu, Kota Lhokseumawe, Aceh 24355, Indonesia
ID 787 Intangible Asset a Key Driver for Company’s Performance: An Overview
Sani Inusa Milala, Khadijah Binti Md Ariffin, Rozilah Binti Kasim, Azlina Binti Md Yassin, and Mohd Hazibal Bin Ishak, Department of Real Estate and Facilities Management, Universiti Tun Hussein Onn Malaysia, Johor, 86400 Malaysia, Narimah Binti Kasim, Department of Construction Management, Universiti Tun Hussein Onn Malaysia, Johor, 86400 Malaysia
ID 788 Investigating the Commercial Innovative Marketing in the Digital Era 4.0: A Comparative Study
Khalsiah and Yuliusdharma, Faculty of Business and Economics, Universitas Malikussaleh, Blang Pulo, Muara Satu, Aceh Utara, 24355 Aceh, Indonesia,
Jumadil Saputra, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia,
Saifuddin Yunus, Faculty of Social and Political Sciences, Universitas Malikussaleh, Blang Pulo, Muara Satu, Aceh Utara, 24355 Aceh, Indonesia
ID 789 Enhancing Boot’s UK Online Store During Pandemic Through Integrated Business Strategies
Ananda Nurhafsah, Faculty of Business, Law and Politics, University of Hull, Hull,HU6 7RX, UK
Derya Deliktaş, Pınar Simay Ergün and Mustafa Akpınar, Department of Industrial Engineering, Kütahya Dumlupınar University, Kütahya, 43100, Turkey
ID 800 A Comparative Analysis of Machine Learning Algorithms in Stock Prediction
Sravani, Computer Science and Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India, Ch. Anusha, Computer Science and Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India, N.V.S. Shankar, Mechanical Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India
ID 801 Diabetes Diagnosis and Classification Using Feed Forward Neural Network Algorithm
Chintam Anusha, Computer Science and Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India,
A Sravani, Computer Science and Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India,
M.A.Praveen, Computer Science and Engineering, Vignan’s Institute of Information technology(A), Visakhapatnam, Andhra Pradesh, India
Irma Dwiyanti, Nasruddin Nawawi, Umi Farida, Magister Program, Sekolah Tinggi Ilmu Ekonomi AMKOP Makassar, Indonesia
Geminastiti Sakkir, Universitas Negeri Makassar, Indonesia
ID 830 Morphological Multivariate Discrimination of Parlatoria cakiloidea Boissm
Mahmoud Dogara Abdulrahman, Department of Biology, Faculty of Education, Tishk International University, Erbil/Iraq
Abdulkadir Yunusa, Department of Basic and Applied Science, Federal Polytechnic Mubi, Adamawa State, Nigeria
Abdulkadir Yunusa, Department of Basic and Applied Science, Federal Polytechnic Mubi, Adamawa State, Nigeria
ID 846 Potential Effectiveness of Quality Tools and Techniques to Introduce Total Quality Management (TQM) in Ready Made Garment (RMG) Manufacturing Industries in Bangladesh
Md Mazharul Habib, Michele Cano, Evi Viza, and Andisheh Bakhshi, School of Computing Engineering and Physical Sciences (CEPS), University of the West of Scotland (UWS), Paisley, UK