Proceedings – 2017 First IEOM EU Conference
ISBN: 978-0-9855497-7-0
ID 002 A Lean Transportation Approach for Reducing Distribution Cost: A Case Study
Bernardo Villarreal, Departamento de Ingeniería, Universidad de Monterrey, Ave. Ignacio Morones Prieto, San Pedro Garza Garcia, NL Mexico
Jose Arturo Garza-Reyes, Derby Business School, The University of Derby, Kedleston Road Campus, Derby, UK, DE22 1GB
Priscila Ocañas and Fernanda Martinez, Departamento de Ingeniería, Universidad de Monterrey, San Pedro Garza Garcia, NL 66238, Mexico
Nokhaiz Tariq Khan, Department of Industrial Engineering, Sungkyunkwan University, South Korea
Jaebum Kim, Korea Institute of Technology, Jeju division, South Korea
Gisun Jung, Department of Industrial Engineering, Sungkyunkwan University, South Korea
Jinsoo Park, Department of Management Information Systems, Yong In University, South Korea
Yun Bae Kim, Department of Industrial Engineering, Sungkyunkwan University, South Korea
ID 21 Managerial Solution for Hospital-acquired Infections
Yasaman Parsia, Puteri Fadzline Muhamad Tamyez and Shahryar Sorooshian, Faculty of Industrial Management, Universiti Malaysia Pahang, Gambang Kuantan, 26300, Pahang, Malaysia
ID 022 Prediction of Residential Sector Energy Consumption: Artificial Neural Network Application
O.A Olanrewaju and C. Mbohwa, Industrial and Operations Department, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
O.A Olanrewaju and C. Mbohwa, Industrial and Operations Department, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
O.A Olanrewaju and C. Mbohwa, Industrial and Operations Department, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 025 Effectiveness of ISO 14001 in the South African chemical industry
Sindisiwe Chauke and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Kehinde Sobiyi, Department of Mechanical Engineering Science, University of Johannesburg, Kingsway Campus, Johannesburg, South Africa
Abdul Talib Bon Ali and Muhammad Faizal Zulkifli, Department of Production and Operations Management, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia
ID 027 Analysis of sectoral energy infrastructure projects in Finland
Hosein Daneshpour, University of Vaasa, Vaasa, Finland
ID 028 The Application of Inventory Control Systems in Warehouse
Phindile Ndlala and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Kehinde Sobiyi, Department of Mechanical Engineering Science, University of Johannesburg, Kingsway Campus, Johannesburg, South Africa
Luz María Valdez de la Rosa, Engineering Management Department, University of Monterrey, Nuevo Leon, Mexico
Luis Alberto Villarreal Villarreal, Center for Business Development and Postgraduate, Autonomous University of Nuevo Leon, Nuevo Leon, Mexico
Juan Baldemar Garza Villegas, Graduate Studies in Engineering, University of Monterrey, Nuevo Leon, Mexico
ID 030 Application of Theory of Constraints in South Africa: A case study in a platinum mine
Tlotlo Ramasu, Department of Quality and Operations Management, University of Johannesburg, Bunting Road, Johannesburg, South Africa
Kehinde Sobiyi and Esther Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park, South Africa
ID 031 Design of an automated carrot peeling machine
Tawanda Mushiri, epartment of Mechanical Engineering, University of Johannesburg, P.O Box APK 524, Johannesburg, South Africa
Dennis M. Mupatsi, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mt Pleasant, Harare, Zimbabwe
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, P.O Box APK 524, Johannesburg, South Africa
ID 032 Finite element analysis of a cubesat
Kudzanai Sekerere, Department of Mechatronic Engineering, Chinhoyi University of Technology, P. Bag 7724, Chinhoyi, Zimbabwe.
Tawanda Mushiri, Dept. of Mechanical Engineering, University of Zimbabwe, P.O Box MP 167, Mt Pleasant, Harare, Zimbabwe
ID 033 Intelligent grading and motion prediction dynamics of tobacco
Tawanda Mushiri, Department of Mechanical Engineering, University of Johannesburg, P.O Box APK 524, Johannesburg, South Africa
Napoleon Sithole, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mt Pleasant, Harare, Zimbabwe
Charles Mbohwa,Faculty of Engineering and the Built Environment,University of Johannesburg,P.O Box APK 524,Johannesburg, South Africa
ID 036 Evaluation of optimisation methods on the shop floor of a serial production
Patrick Pötters1, 2, Robert Schmitt1 and Bert Leyendecker2
1RWTH Aachen University, Laboratory for Machine Tools and Production Engineering, Steinbachstraße 19, 52074 Aachen, Germany
2University of Applied Sciences Koblenz, Faculty Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
A. Nilgun Kayadelen and Z. Figen Antmen, Department of Industrial Engineering, Cukurova University, Adana, Turkey
ID 038 BIW Process Modeling and Simulation Analysis
Annamalai Pandian, Mechanical Engineering Department, Saginaw Valley State University, University Center, MI, USA
ID 039 Towards Systematic Implementation of Waste Management in Construction Industry
Wan Nadzri Osman, Mohd Nasrun Mohd Nawi and Rohaizah Saad, School of Technology Management and Logistics, Universiti Utara Malaysia
ID 040 Application of Hycura for municipal waste digestion recovering biogas
M. M. Manyuchi, C. Mbohwa, E. Muzenda and S. Masebinu, Bioenergy and Environment Technology Research Group Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
M. M. Manyuchi, C. Mbohwa, E. Muzenda and S. Masebinu, Bioenergy and Environment Technology Research Group, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 043 Bio methane enrichment of landfill waste biogas
M. M. Manyuchi, C. Mbohwa, E. Muzenda and S. Masebinu, Bioenergy and Environment Technology Research Group, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Thong Sze Yee, Zuraidah Bt. Mohd Zain and Tan Chan Sin, Manufacturing Engineering, Universiti Malaysia Perlis (UniMAP), Perlis, Malaysia
ID 047 Using BPM to improve sustainability in biomass generation
Bruno Gallotta, Centre for Supply Chain Improvement, University of Derby, Derby, UK
Vidrene Kolelas, Aston University, United Kingdom
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, UK
Anthony Anosike, Centre for Supply Chain Improvement, University of Derby, Derby, UK
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, UK
Wenjun Ni, Department of Industrial and Manufacturing Systems Engineering, Faculty of Engineering, The University of Hong Kong, Hong Kong
Jia Shu, Dept. of Management Science and Engineering, School of Economics and Management, Southeast University, Nanjing, Jiangsu, China
Miao Song, Department of Logistics and Maritime Studies, Faculty of Business, The Hong Kong Polytechnic University, Hong Kong
ID 050 Lean Production and Quality Performance in Malaysian Manufacturing Industries
Rosman Iteng, Mohd Akhir Haji Ahmad and Kamarul Irwan Abdul Rahim, School of Technology Management and Logistics, College of Business, Universiti Utara Malaysia, Sintok, Kedah 06100, Malaysia
ID 051 Strategic Asset Allocation Portfolio Using Elastic Asset Allocation
Taewan Kim, Mihyeop Lee and Daeryong Seo, Paul Math School, 12-11, Dowontongmi-gil, Cheongcheon-myeon, Goesan-gun, Chungcheongbuk-do, Republic of Korea
ID 052 Lean Six Sigma (LSS) Practices of Supply Chain
Abdulaziz M. Almutairi, King Saud Medical City (KSMC), Cranfield University, Cranfield, MK43 0TQ, UK
Yuchun Xu and Konstantinos Salonitis, School of Aerospace, Transport and Manufacturing (SATM), Cranfield University, Cranfield, MK43 0AL, UK
ID 053 Loosely Coupled Microservice Architecture for Internet of Things
Ahmad Tarmizi Abdul Ghani and Mohamad Shanudin Zakaria, Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia
ID 054 A new diversification measurement technique in metaheuristics for vehicle routing problems
Muge ACAR and Onur KAYA, Industrial Engineering Department, Anadolu University, Eskisehir, TURKEY
Bahman Rostami-Tabar and Stephen M. Disney, Logistics Systems Dynamics Group, Cardiff Business School, Cardiff University, Cardiff, UK
ID 057 Robotic Polishing of Streamline Co-Extrusion Die: A Case Study
Srinivas Ganapathyraju and Shahab Ghafari, Sheridan Institute of Advanced Learning and Technology, Brampton, Ontario L6Y5H9, Canada
Armin Buckhorst and Robert H. Schmitt, Lab. for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Aachen, Germany
Yanwen Dong, Cluster of Science and Technology, Fukushima University, Kanayagawa No.1, Fukushima city, 960-1296 Japan
ID 062 An investigation of lean and green supply chain in the Industry 4.0
Susana Duarte and V. Cruz-Machado, UNIDEMI – Department of Mechanical and Industrial Engineering, Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, Campus Universitário, 2829-516 Caparica, Portugal
Antonio Carlos Pacagnella Junior, School of Applied Sciences, State University of Campinas, Limeira, São Paulo, Brazil
Sergio Luis da Silva, Production Engineering Department, Federal University of São Carlos, São Carlos, São Paulo, Brazil
Ornella Pacifico, Centro Universitário Estácio de Ribeirão Preto, Ribeirão Preto, São Paulo, Brazil
ID 068 An Integrated inventory and routing for the single-period problems with deterministic demand
Mohd Kamarul Irwan Abdul Rahim, Rosman Iteng and Mohd Akhir Ahmad, School of Technology Management and Logistics, Universiti Utara Malaysia, UUM Sintok, Kedah, MALAYSIA.
Mohd Fais Abd Ghani, Ahmad Farid Abidin and Naeem S. Hannoon, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam, Selangor, Malaysia
Johnson Adebayo Fadeyi and Leslie Monplaisir, Department of Industrial & Systems Engineering, Wayne State University, Detroit, MI 48202, USA
ID 071 Process Flow Modelling and Optimization of a Foundry Layout in Zimbabwe using Simulation
Wilson R. Nyemba, Department of Mechanical Engineering Science, Faculty of Engineering and the Built, Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
Ruvimbo Mhlanga, Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Mount, Pleasant, Harare, Zimbabwe
Charles Mbohwa, Professor of Sustainability Engineering, Department of Quality and Operations Management & Vice Dean for Research and Innovation, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
ID 072 Newsvendor Based Pricing Model for Liner Shipping With Sailing Speed Optimization
Walaa Ishnaineh, Industrial Engineering and Engineering Management Department, University of Sharjah, Sharjah, UAE
Ali Cheaitou, SEAM Research Group and Industrial Engineering and Engineering Management Department, University of Sharjah, Sharjah, UAE
ID 073 Waste Heat and Energy Recovery System from Smelter-Off Gas for a Platinum Processing Plant
Wilson R. Nyemba, Department of Mechanical Engineering Science, Faculty of Engineering and the Built, Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
Innocent Mushanguri and Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Mount, Pleasant, Harare, Zimbabwe
Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
Nicolas Brune, David Bendig and Malte Brettel, Innovation and Entrepreneurship Group (WIN) – Center for Entrepreneurship, TIME Research Area, School of Business and Economics, RWTH Aachen University, 52072 Aachen, Germany
Wilson R. Nyemba, Department of Mechanical Engineering Science, Faculty of Engineering and the Built, Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
Chris Pote and Tauyanashe Chikuku, Department of Mechanical Engineering, University of Zimbabwe, Mount, Pleasant, Harare, Zimbabwe
Charles Mbohwa, Professor of Sustainability Engineering, Department of Quality and Operations Management & Vice Dean for Research and Innovation, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa
ID 077 Multi-Criteria Decision Making: The Case of Large and Distinct Decision Makers
Anthony Afful-Dadzie and Eric Afful-Dadzie, Department of Operations Management and Information Systems, University of Ghana Business School, Accra, Ghana
ID 080 Sustainability for the Manufacturing and Service Industries in Zimbabwe
Loice K Gudukeya, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Paul Mativenga, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Manchester, M13 9PL, UK
ID 081 Capturing Complexity and Interdependencies in Environmental Production Networks
Sabine Baumann and Christoph Wunck, College of Management, Information, Technology, Jade University, Wilhelmshaven, Germany
ID 082 Cost Benefit Analysis of Waste in South Africa
Jemilugba Olufunto Tolulope and Vuyo Mavumengwana, Dept. of Biotechnology and Food Technology, University of Johannesburg, South Africa.
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 083 Impact of Quality Management Practices on Malaysian Automotive Industry: An Empirical Review
Hj Mohd Akhir Hj Ahmad, Rosman Iteng and Mohd Kamarul Irwan Abdul Rahim, School of Technology Management and Logistics, University Utara Malaysia, 06010 Sintok, Kedah, Malaysia
Eldon Glen Caldwell Marín, Department of Industrial Engineering, University of Costa Rica, San José, Costa Rica
Miguel Cazorla, University Institute for Computing Research, University of Alicante, Alicante, Spain
Mauricio Zamora, Smart, Lean & Cognitive Systems Lab., University of Costa Rica, San José, Costa Rica
José García and Jorge Azorin-Lopez, Industrial Informatics and Computer Networks Research Group, University of Alicante, Alicante, Spain
ID 087 Logistics Transportation integration to import steel slabs. A case study
Teresa Verduzco-Garza, Jorge Fernando Fonseca Sánchez, José Guadalupe Olvera Hernández and Bryan Raúl Rangel Martínez, Division of Engineering & Technologies, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, NL, 66238, Mexico
ID 091 Multi Product Multi Period Network Design for Reverse Logistics
Aysenur Budak and Alp Ustundag, Department of Industrial Engineering, Istanbul Technical University, Macka, Istanbul, Turkey
ID 092 BIM Implementation strategies in Higher Education Case Study Coventry University
Abdussalam Shibani, Coventry University, Coventry, United Kingdom
ID 093 Canalization Hydroturbine
Ilya Shelegeda, Moscow, Russia
ID 094 Decreasing Ambulance Response Time through an Optimal Base Location
Bernardo Villarreal, Edgar-Marco-Aurelio Granda-Gutierrez, Samantha Lankenau, Ana-Cristina Bastidas and Andrea Montalvo, Universidad de Monterrey, San Pedro Garza García, N.L., México
ID 095 Group Modeling-Building: The Environment, Culture and Work Conditions Impact on the Process
Sadia Rina, Department of Industrial and Management Engineering, Shenkar College of Engineering and Design, Ramat-Gan, Israel
Ibrahim Mustafa, Department of Chemical Engineering Technology, Yanbu Industrial College, Saudi Arabia
Chihwei Lu and Yan-Teng Lian, Department of Industrial System and Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
ID 098 Spectrum of Circular Economy and its Prospects in Logistics
Simon Peter Nadeem, Jose Arturo Garza-Reyes and Anthony I. Anosike, Centre for Supply Chain Improvement, The University of Derby, UK
Vikas Kumar, Bristol Business School, University of the West of England, Coldharbour Ln, Bristol, UK
ID 099 Revenue Structure of Mobile Banking: A System Dynamics Model
Mahdi Bastan and Reza Ramazani Khorshid-Doust, Department of Industrial Engineering & Management Systems, Amirkabir University of Technology, Tehran, Iran
Saeid Delshad Sisi, Department of Industrial Engineering, Clemson University, Clemson, USA
Sareh Akbarpour, Department of Industrial Engineering, Eyvanekey University, Eyvanekey, Iran
ID 101 How Are Supply Chain Optimal Decisions Influenced by Product Characteristics?
Mojtaba Mahdavi and Tava Lennon Olsen, The University of Auckland Business School, Auckland, New Zealand
ID 102 Leveraging Industry 4.0 to extend Lean Manufacturing gains
Wendy Garner, Steve Martin and Richard Bateman, Coventry University, United Kingdom
ID 103 Time Series Forecasting for a Call Centre
Bahar Sennaroglu, Department of Industrial Engineering, Marmara University, Istanbul, Turkey and Department of Engineering and the Built Environment, Anglia Ruskin University, Chelmsford Essex, UK
Gokcag Polat, Department of Engineering Management, Marmara University, Istanbul, Turkey
ID 104 A Network-Based Model for Assigning Flights to Gates at Airports
Harvey Millar, Sobey School of Business, Saint Mary’s University, Halifax, Nova Scotia, Canada
Jichen Zhang, Industrial Engineering Department, Dalhousie University, Halifax, Nova Scotia, Canada
Jean-Paul Arnaout, Business Administration Department, Gulf University for Science and Technology, Mishref, Kuwait
ID 110 System Design and Organizational Management Considerations for a Digital Factory
Pranav Ketharam Pattabi, Department of Electrical and Computer Engineering, University of Toronto, Toronto, Canada
ID 114 Inspection System using Vision system
Kartik Shah, Dept. of Industrial Engineering, School of Technology, Pandit Deendayal Petroleum University, Raisan, Gandhinagar, Gujarat, India
M.B. Kiran, Department of Industrial Engineering, Pandit Deendayal Petroleum University, Raisan, Gandhinagar-382007, Gujarat, India
ID 115 Interpretation of Value in the Saudi Housing Market
Basil Omar Al-Sasi, Industrial Engineering Department, King Abdul-Aziz University, Jeddah Saudi Arabia
ID 116 Sociability as a decision model for artificial agents
Joaquín F Sánchez, Juan P Ospina, John E Gonzalez and Jorge E Ortiz, Department of Systems and Industrial Engineering, Faculty of Engineering, National University of Colombia, Bogota Colombia
Id 117 The Impact of Logistics Tools on Planning and Control Activities for Production And Inventory
Diana Sánchez-Partida and José-Luis Martínez-Flores, Department of Logistics and Supply Chain Management, UPAEP University, Mexico
Yessica Cruz-Hernández, Department of Industrial Engineering, ITC University, Mexico
Erin Chancey, Department of Logistics and Supply Chain Management, UPAEP University, Mexico
ID 118 Hysteretic Delta-Sigma Modulator
Raed Althomali and Mohammed A. Alsumiri, Dept. of Electrical and Electronics Engineering, Yanbu Industrial College, Yanbu Al-Sinaiyah, KSA
ID 119 An Agent Based Control System for Multiple-load AGVs
Melek Demirtaş and Cenk Şahin, Department of Industrial Engineering, Cukurova University, Adana, Turkey
ID 120 Experimental Design for Analyzing Shade Variation in Dyeing Process
Bahar Sennaroglu, Department of Industrial Engineering, Marmara University, Istanbul, Turkey
Department of Engineering and the Built Environment, Anglia Ruskin University, Chelmsford Essex, UK
ID 123 Ergonomic evaluation for labors in a Thin Film Transistor-Liquid Crystal Display plant
Chihwei Lu, Department of Industrial System and Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
Chia-Chun Yao and Chein-Wen Kuo, Graduate Institute of Occupational Safety and Heath, Kaohsiung Medical University, Kaohsiung City, Taiwan
ID 124 Accommodating Solo Women Passengers When Making Seat Reservations
Ajwan Jan, Ayah Jamal-Allail, Noor Faidy and Nuran Tashkandi, Industrial Engineering Department, King Abdulaziz University, Jeddah, KSA
Raed Obaid & Rimal Abutaha, Industrial Engineering Department, King Abdulaziz University, Jeddah, KSA
Grace Mukondeleli Kanakana, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, 0001, South Africa
Bolanle Tolulope Abe and Purva Shrivastava, Department of Electrical Engineering, Tshwane University of Technology, Pretoria, 000, South Africa
ID 129 Improving casting productivity by utilizing automation
Grace Mukondeleli Kanakana and Laseinde Thimothy Opeyeolu, Industrial Engineering Dept., Tshwane Univ. of Technology, Pretoria, South Africa
John M Ikome, Department of Industrial Engineering, Vaal University of Technology, South Africa
Grace M Kanakana, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, South Africa
Nur Hazwani Dzulkefly and John Halloran, School of Computing, Faculty of Engineering and Computing, Coventry University, United Kingdom
ID 133 A review on transportation last-mile network design and urban freight vehicles
Jessica Calderon Guerrero, Industrial and Systems Engineering, Universidad de Monterrey, San Pedro Garza García, N.L, 66238, Mexico
Jenny Díaz-Ramírez, Division of Engineering and Technologies, Dept. of Engineering, Universidad de Monterrey, San Pedro Garza García, Mexico
ID 135 A Methodology for Consideration of CO2 Emissions on the Single-Facility Location Problem
Santiago Omar Caballero Morales and José Luís Martínez Flores, Postgraduate Department of Logistics and Supply Chain Management, Universidad Popular Autónoma del Estado de Puebla, A.C, UPAEP, 17 Sur 711, Barrio de Santiago, 72410, Puebla, México
ID 137 Historical Hashtags: An Investigation of the ‘#CometLanding’ Tweets
Noor Farizah Ibrahim and Christopher Durugbo, School of Economics, Finance and Management, University of Bristol, Bristol, United Kingdom
ID 138 Waste Reduction Applying Lean Thinking and Six Sigma Tools in Steel Industry
Vinicius de Souza Moura, Mechanical Engineering Department, PUCRS, Porto Alegre, Rio Grande do Sul, Brazil
Carlos Alexandre dos Santos, Dean, School of Engineering, PUCRS, Porto Alegre, Rio Grande do Sul, Brazil
Daniel Luiz de Mattos Nascimento, Civil and Environmental Engineering Department, PUC-Rio, Rio de Janeiro, Rio de Janeiro, Brazil
Rodrigo Goyannes Gusmão Caiado, Industrial Engineering Department, Federal Fluminense University, Niterói, Rio de Janeiro, Brazil
Noor Farizah Ibrahim and Xiaojun Wang, School of Economics, Finance and Management, University of Bristol, Bristol, United Kingdom
ID 140 Effective Integration of Operations Strategy Framework for Manufacturing SMEs
Adam Ali, Ivan Arokiam, Richard Anderson and Keith Popplewell, School of Mechanical, Aerospace and Automotive Engineering, Faculty of Engineering and Computing, Coventry University, CV1 5FB, UK
Jean-Marc Vasnier, Ecole d’ingénieurs Ei.Cesi, Boulevard de l’Université – Gavy Océanis, 44603 Saint-Nazaire, France
Muhammad and Rahmat Nurcahyo, Industrial Engineering (IE) Dept., Faculty of Engineering, University of Indonesia, Depok, West Java, Indonesia
Muhammad, Rahmat Nurcahyo and Irwan Dharmawan. Dutch Study Program, Faculty of Humanities, University of Indonesia, Indonesia
Thomas Munyai, Department of Operations Management, Tshwane University of Technology, Pretoria, South Africa
Charles Mbohwa, Faculty of Engineering and built Environment, University of Johannesburg, Johannesburg, South Africa
ID 146 Surface profile of objects for 3D printers by fringe pattern
Javier Cruz Salgado, Research and Technological Development Dept., Universidad Politécnica del Bicentenario (UPB), Silao, Guanajuato, México
ID 148 Project Based Learning in Engineering Education
John M Ikome and Grace M Kanakana, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, South Africa
ID 149 Synchronizing Discrete Event Simulation Models and System Dynamics Models
Magdy Helal, Industrial Engineering Department, American University of the Middle East, Kuwait
Luis Rabelo, Industrial Engineering and Management Systems Department, University of Central Florida, Orlando, FL, USA
Bongumusa Mansuette Bhekamalinda Cebekhulu, School of Mining Engineering, Wits University, Johannesburg, RSA
Chipo Mugova, Management College of Southern Africa (Mancosa), Johannesburg, RSA
Stella Zoë Mulombe and Chipo Mugova, Management College of Southern Africa (MANCOSA), Johannesburg, South Africa
Nadezhda Kozlovskaya and Knut Richter, Saint Petersburg State University, St. Petersburg, Russia
ID 155 Microbial Community in the Waste Management Process of Anaerobic Digestion
Jemilugba Olufunto Tolulope, Department of Biotechnology and Food Technology, University of Johannesburg, South Africa
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Shraddha Gawankar, Sachin Kamble and Shraddha Gawankar, Robins School of Business, University of Richmond, Richmond, VA 23173, USA
Sachin Kamble, National Institute of Industrial Engineering (NITIE), Vihar Lake Marg, Mumbai, Maharashtra 400087, INDIA
Shraddha Gawankar, Bhaskar Patel and Shraddha Gawankar, Robins School of Business, University of Richmond, Richmond, VA 23173, USA
Bhaskar Patel, Sri Venkateswara College of Engineering & Technology, R.V.S. Nagar, Tirupati Road, Chittoor – Andhra Pradesh, 517 127, INDIA
Mkwanazi Michael Sizwe and Mbohwa Charles, Department of Quality and Operations Management, University of Johannesburg, South Africa
Mkwanazi Michael Sizwe, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Mbohwa Charles, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa
Mkwanazi Michael Sizwe, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, 2006, South Africa
Mbohwa Charles, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, 2006, South Africa
ID 161 Assessment of waste management in the South African chemical industry
Sindisiwe Chauke and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Kehinde Sobiyi, Department of Mechanical Engineering Science, University of Johannesburg, Kingsway Campus, Johannesburg, South Africa
Y. El Khchine and M. Sriti, Engineering Sciences Laboratory, Polydisciplinary Faculty of Taza, Sidi Mohamed Ben Abdellah University, Taza, Morocco
ID 169 Adaptive Hysteresis Band Based Fuzzy Controlled Shunt Active Power Filter
Abdeldjabbar Mohamed Kouadria and Tayeb Allaoui, Department of Electrical Engineering, Energetic Engineering and Computer Engineering Laboratory, University of Ibn Khaldoun ,Tiaret, Algeria
Mouloud Denaï and George Pissanidis, School of Engineering and Technology, University of Hertfordshire, Hatfield, UK
ID 170 Fault diagnosis of gear transmission system on LMD and Cyclostationary Demodulation
Yao Zhuting, College of Mechanical and Power Engineering, North University of China, Taiyuan, 030051, China
Y. El khchine and M. Sriti, Engineering Sciences Laboratory, Polydisciplinary Faculty of Taza, Sidi Mohamed Ben Abdellah Univ., Taza, Morocco
ID 174 Exploring challenges impeding sustainable supply chain practices in mining industry
Ndala Yves Mulongo and Pule Kholopane, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, PO BOX, 524, Auckland Park, 2006, South Africa
Ndala Yves Mulongo and Kholopane Pule, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, South Africa
ID 177 Exploring key factors creating food insecurity at houshold level
Ndala Yves Mulongo and Kholopane Pule, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, South Africa
Ndala Yves Mulongo and Kholopane Pule, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, South Africa
ID 179 Lean Transportation in Emergency Medical Operations
Bernardo Villarreal, Edgar Granda, Samantha Lankenau, Andrea Montalvo & Ana Cristina Bastidas, Universidad de Monterrey, San Pedro Garza García, N.L., México
José Arturo Garza – Reyes, Derby Business School, The University of Derby, Derby, DE22 1GB, UK
Sawarni Hasibuan1, Hermawan Thaheer2, R. Eddy Nugroho3, Juliza Hidayati4
1Master’s of Industrial Engineering, UniversitasMercuBuana Jakarta, Indonesia
2Computer Science Department, UniversitasPakuan, Bogor, Indonesia
3Master’s of Management UniversitasMercuBuana Jakarta, Indonesia
4Industrial Engineering Department, Universitas Sumatera Utara Medan, Indonesia
Elmira Parvizi-Omrana and Saeed Najafi-Tavanib, Institute for Management and Planning Studies, Tehran, Iran
Kenzhebaeva T.S., Orazbayev B.B. and Abitova G.A., Department of System Analyses and Control, L.N. Gumilyov Eurasian National University, Astana, 010000, Kazakhstan
Orazbayeva K.N., Department of Management, Kazakh University of Economy, Finance and International Trade, Astana, 010000, Kazakhstan
Spichak Y.V., Department of Electroenergy and Automation of the Technical Systems, Karaganda State Industrial University, Temirtau, Kazakhstan
ID 184 Surface profile of objects for 3D printers by fringe pattern
Javier Cruz Salgado, Research and Technological Development Dept., Universidad Politécnica del Bicentenario (UPB), Silao, Guanajuato, México
ID 185 Queuing Theory for Banking Application
Poonam Savsani and Ravi Nasit, Department of Industrial Engineering, School Of Technology, Pandit Deendayal Petroleum University, Gandhinagar, Gujarat- 382007, INDIA
Huy Q. Phan, Vikas Kumar and Mohammed Saad, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK
Jose A. Garza-Reyes, Derby Business School, The University of Derby, Derby, DE22 1GB, UK
Noko Mokoele and Yves Mulongo, Faculty of Economics and Financial Science, University of Johannesburg, Auckland Park 2006, South Africa
ID 189 Maintenance staff scheduling: A case study
Tamer G. Ali, Adel M. Al-Shaye’a and Mohamed Aly O. Louly, Department of Industrial Engineering, King Saud University, Riyadh, Saudi Arabia
ID 19 Service procedure of TGTDCL, Is it compatible with the modern world? A case study of TGTDCL
ID 190 Exploring Challenges Impeding Sustainable Supply Chain Practices in Mining Sector
Ndala Yves Mulongo and Pule Kholopane, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, PO BOX, 524, Auckland Park, 2006, South Africa
Udonna Okeke and Wendy Phillips, University of the West of England, Bristol, United Kingdom
Deepak C and M H Bala Subrahmanya, Department of Management Studies, Indian Institute of Science, India
Lawrance Seseni and Charles Mbohwa, Department of Quality and Operations, University of Johannesburg, Johannesburg, South Africa
ID 198 Factors Influencing Effectiveness of Lean Maintenance Repair and Overhaul in Aviation
Adrián Peña Sánchez and Funlade Sunmola, School of Engineering and Technology, University of Hertfordshire, Hatfield, AL10 9AB, UK
ID 199 Multi-Response Optimization of EDM for Ti-6Al-4V using Taguchi – Response surface methodology
Gopal Zinzala and Ritesh Joshi, Department of Industrial Engineering, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar, Gujarat- 382007, INDIA
Mohd. Rizal Razalli and Norlena Hasnan, School of Technology Management and Logistics, Universiti Utara Malaysia, Kedah, Malaysia
ID 207 A Systematic Literature Review on Visibility in Sustainable Supply Chain Ecosystems
Apeji Uje Daniel and Funlade T. Sunmola, Manufacturing, Materials and Biomedical Engineering Dept., University of Hertfordshire, Hatfield, England
Petros Khoudian, Centre for Academic Quality Assurance, University of Hertfordshire, Hatfield, AL10 9UF England
Mahdis Kanani, Master of Socio-Economic Engineering, National Iranian Oil Refining & Distribution Company, Tehran, Iran
Lawrance Seseni and Charles Mbohwa, Department of Quality and Operations, University of Johannesburg, Johannesburg, South Africa
ID 210 Integrated Lean Concept to Healthcare Delivery Framework for Urgent Care at Home
Ali Al Muflih and Md. Noor-E-Alam, Department of Mechanical and Industrial Engineering, Northeastern University,Boston, MA 02115, USA
ID 211 Barriers and Enablers of Lean Tools in Medical Laboratory Industry: A Case of Namibia
Michael Mutingi, Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia
Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Hilma D. Isack and Hileni Kandjeke, Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
ID 212 Adoption of Lean Tools in Medical Laboratory Industry: A Case Study of Namibia
Michael Mutingi, Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia and Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Hilma D. Isack and Hileni Kandjeke, Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Robert A Allen and Simon Renfrey, Centre for Defence Management and Leadership, Cranfield University, United Kingdom
ID 215 Assessing Engineering students performance in Electronics course during first year of studies
Bolanle Tolulope Abe and Purva Shrivastava, Department of Electrical Engineering, Tshwane University of Technology, South Africa
Mukondeleli Grace Kanakana, Department of Industrial Engineering, Tshwane University of Technology, South Africa
Alireza Javahernia, Funlade Sunmola and Leslie Mitchell, School of Engineering and Technology, University of Hertfordshire, Hatfield, UK
Lawrance Seseni and Charles Mbohwa, Department of Quality and Operations, University of Johannesburg, Johannesburg, South Africa
ID 220 Modelling Inventory Grouping Decisions Using Grouping Genetic Algorithms
Michael Mutingi, Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia and Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Grace Mukondeleli Kanakana, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, 0001, South Africa
Bolanle Tolulope Abe and Purva Shrivastava, Department of Electrical Engineering, Tshwane University of Technology, Pretoria, 000, South Africa
Shitlhangu Raymond Khambani, Mancosa Graduate School of Business, Durban, South Africa
Chipo Mugova, Mancosa Graduate School of Business, Durban, South Africa
Bongumusa Mansuette Bhekamalinda Cebekhulu, Wits School of Mining Engineering, Johannesburg, South Africa
ID 225 Effective Performance Analysis of Industrial Robotics for Automated Manufacturing System
a, b, c Hayder Zghair and c Ahad Ali
a Engineering Department of Automated Manufacturing Systems, University of Baghdad, Main Campus, Aljadria St., Baghdad, Iraq
b Industrial and Manufacturing Engineering Department, Kettering University, 1700 University Ave, Flint, MI, USA
c A. Leon Linton Department of Mechanical Engineering, Lawrence Tech University, 21000 West Ten Mile Road, Southfield, MI, USA
Irshad Ali, Sterling Heights Assembly Plant, Fiat Chrysler Automotive, 38111 Van Dyke, Sterling Heights, MI, USA